LXR uboot/drivers/clk/Kconfig

   1menu "Clock"
   2
   3config CLK
   4        bool "Enable clock driver support"
   5        depends on DM
   6        help
   7          This allows drivers to be provided for clock generators, including
   8          oscillators and PLLs. Devices can use a common clock API to request
   9          a particular clock rate and check on available clocks. Clocks can
  10          feed into other clocks in a tree structure, with multiplexers to
  11          choose the source for each clock.
  12
  13config SPL_CLK
  14        bool "Enable clock support in SPL"
  15        depends on CLK && SPL && SPL_DM
  16        help
  17          The clock subsystem adds a small amount of overhead to the image.
  18          If this is acceptable and you have a need to use clock drivers in
  19          SPL, enable this option. It might provide a cleaner interface to
  20          setting up clocks within SPL, and allows the same drivers to be
  21          used as U-Boot proper.
  22
  23config TPL_CLK
  24        bool "Enable clock support in TPL"
  25        depends on CLK && TPL_DM
  26        help
  27          The clock subsystem adds a small amount of overhead to the image.
  28          If this is acceptable and you have a need to use clock drivers in
  29          SPL, enable this option. It might provide a cleaner interface to
  30          setting up clocks within TPL, and allows the same drivers to be
  31          used as U-Boot proper.
  32
  33config CLK_BCM6345
  34        bool "Clock controller driver for BCM6345"
  35        depends on CLK && ARCH_BMIPS
  36        default y
  37        help
  38          This clock driver adds support for enabling and disabling peripheral
  39          clocks on BCM6345 SoCs. HW has no rate changing capabilities.
  40
  41config CLK_BOSTON
  42        def_bool y if TARGET_BOSTON
  43        depends on CLK
  44        select REGMAP
  45        select SYSCON
  46        help
  47          Enable this to support the clocks
  48
  49config CLK_STM32F
  50        bool "Enable clock driver support for STM32F family"
  51        depends on CLK && (STM32F7 || STM32F4)
  52        default y
  53        help
  54          This clock driver adds support for RCC clock management
  55          for STM32F4 and STM32F7 SoCs.
  56
  57config CLK_TI_SCI
  58        bool "TI System Control Interface (TI SCI) clock driver"
  59        depends on CLK && TI_SCI_PROTOCOL && OF_CONTROL
  60        help
  61          This enables the clock driver support over TI System Control Interface
  62          available on some new TI's SoCs. If you wish to use clock resources
  63          managed by the TI System Controller, say Y here. Otherwise, say N.
  64
  65config CLK_HSDK
  66        bool "Enable cgu clock driver for HSDK"
  67        depends on CLK
  68        help
  69          Enable this to support the cgu clocks on Synopsys ARC HSDK
  70
  71config CLK_VERSAL
  72        bool "Enable clock driver support for Versal"
  73        depends on ARCH_VERSAL
  74        select ZYNQMP_FIRMWARE
  75        help
  76          This clock driver adds support for clock realted settings for
  77          Versal platform.
  78
  79config CLK_VEXPRESS_OSC
  80        bool "Enable driver for Arm Versatile Express OSC clock generators"
  81        depends on CLK && VEXPRESS_CONFIG
  82        help
  83          This clock driver adds support for clock generators present on
  84          Arm Versatile Express platforms.
  85
  86config CLK_ZYNQ
  87        bool "Enable clock driver support for Zynq"
  88        depends on CLK && ARCH_ZYNQ
  89        default y
  90        help
  91          This clock driver adds support for clock realted settings for
  92          Zynq platform.
  93
  94config CLK_ZYNQMP
  95        bool "Enable clock driver support for ZynqMP"
  96        depends on ARCH_ZYNQMP
  97        select ZYNQMP_FIRMWARE
  98        help
  99          This clock driver adds support for clock realted settings for
 100          ZynqMP platform.
 101
 102config CLK_STM32MP1
 103        bool "Enable RCC clock driver for STM32MP1"
 104        depends on ARCH_STM32MP && CLK
 105        default y
 106        help
 107          Enable the STM32 clock (RCC) driver. Enable support for
 108          manipulating STM32MP1's on-SoC clocks.
 109
 110source "drivers/clk/at91/Kconfig"
 111source "drivers/clk/exynos/Kconfig"
 112source "drivers/clk/imx/Kconfig"
 113source "drivers/clk/mvebu/Kconfig"
 114source "drivers/clk/owl/Kconfig"
 115source "drivers/clk/renesas/Kconfig"
 116source "drivers/clk/tegra/Kconfig"
 117source "drivers/clk/uniphier/Kconfig"
 118
 119config ICS8N3QV01
 120        bool "Enable ICS8N3QV01 VCXO driver"
 121        depends on CLK
 122        help
 123          Support for the ICS8N3QV01 Quad-Frequency VCXO (Voltage-Controlled
 124          Crystal Oscillator). The output frequency can be programmed via an
 125          I2C interface.
 126
 127config CLK_MPC83XX
 128        bool "Enable MPC83xx clock driver"
 129        depends on CLK
 130        help
 131          Support for the clock driver of the MPC83xx series of SoCs.
 132
 133endmenu
 134