/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * (C) Copyright 2000-2004
 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 */

#ifndef BLK_H
#define BLK_H

#include <efi.h>

#ifdef CONFIG_SYS_64BIT_LBA
typedef uint64_t lbaint_t;
#define LBAFlength "ll"
#else
typedef ulong lbaint_t;
#define LBAFlength "l"
#endif
#define LBAF "%" LBAFlength "x"
#define LBAFU "%" LBAFlength "u"

/* Interface types: */
enum if_type {
        IF_TYPE_UNKNOWN = 0,
        IF_TYPE_IDE,
        IF_TYPE_SCSI,
        IF_TYPE_ATAPI,
        IF_TYPE_USB,
        IF_TYPE_DOC,
        IF_TYPE_MMC,
        IF_TYPE_SD,
        IF_TYPE_SATA,
        IF_TYPE_HOST,
        IF_TYPE_NVME,
        IF_TYPE_EFI,
        IF_TYPE_VIRTIO,

        IF_TYPE_COUNT,                  /* Number of interface types */
};

#define BLK_VEN_SIZE            40
#define BLK_PRD_SIZE            20
#define BLK_REV_SIZE            8

/*
 * Identifies the partition table type (ie. MBR vs GPT GUID) signature
 */
enum sig_type {
        SIG_TYPE_NONE,
        SIG_TYPE_MBR,
        SIG_TYPE_GUID,

        SIG_TYPE_COUNT                  /* Number of signature types */
};

/*
 * With driver model (CONFIG_BLK) this is uclass platform data, accessible
 * with dev_get_uclass_platdata(dev)
 */
struct blk_desc {
        /*
         * TODO: With driver model we should be able to use the parent
         * device's uclass instead.
         */
        enum if_type    if_type;        /* type of the interface */
        int             devnum;         /* device number */
        unsigned char   part_type;      /* partition type */
        unsigned char   target;         /* target SCSI ID */
        unsigned char   lun;            /* target LUN */
        unsigned char   hwpart;         /* HW partition, e.g. for eMMC */
        unsigned char   type;           /* device type */
        unsigned char   removable;      /* removable device */
#ifdef CONFIG_LBA48
        /* device can use 48bit addr (ATA/ATAPI v7) */
        unsigned char   lba48;
#endif
        lbaint_t        lba;            /* number of blocks */
        unsigned long   blksz;          /* block size */
        int             log2blksz;      /* for convenience: log2(blksz) */
        char            vendor[BLK_VEN_SIZE + 1]; /* device vendor string */
        char            product[BLK_PRD_SIZE + 1]; /* device product number */
        char            revision[BLK_REV_SIZE + 1]; /* firmware revision */
        enum sig_type   sig_type;       /* Partition table signature type */
        union {
                uint32_t mbr_sig;       /* MBR integer signature */
                efi_guid_t guid_sig;    /* GPT GUID Signature */
        };
#if CONFIG_IS_ENABLED(BLK)
        /*
         * For now we have a few functions which take struct blk_desc as a
         * parameter. This field allows them to look up the associated
         * device. Once these functions are removed we can drop this field.
         */
        struct udevice *bdev;
#else
        unsigned long   (*block_read)(struct blk_desc *block_dev,
                                      lbaint_t start,
                                      lbaint_t blkcnt,
                                      void *buffer);
        unsigned long   (*block_write)(struct blk_desc *block_dev,
                                       lbaint_t start,
                                       lbaint_t blkcnt,
                                       const void *buffer);
        unsigned long   (*block_erase)(struct blk_desc *block_dev,
                                       lbaint_t start,
                                       lbaint_t blkcnt);
        void            *priv;          /* driver private struct pointer */
#endif
};

#define BLOCK_CNT(size, blk_desc) (PAD_COUNT(size, blk_desc->blksz))
#define PAD_TO_BLOCKSIZE(size, blk_desc) \
        (PAD_SIZE(size, blk_desc->blksz))

#if CONFIG_IS_ENABLED(BLOCK_CACHE)
/**
 * blkcache_read() - attempt to read a set of blocks from cache
 *
 * @param iftype - IF_TYPE_x for type of device
 * @param dev - device index of particular type
 * @param start - starting block number
 * @param blkcnt - number of blocks to read
 * @param blksz - size in bytes of each block
 * @param buf - buffer to contain cached data
 *
 * @return - '1' if block returned from cache, '0' otherwise.
 */
int blkcache_read(int iftype, int dev,
                  lbaint_t start, lbaint_t blkcnt,
                  unsigned long blksz, void *buffer);

/**
 * blkcache_fill() - make data read from a block device available
 * to the block cache
 *
 * @param iftype - IF_TYPE_x for type of device
 * @param dev - device index of particular type
 * @param start - starting block number
 * @param blkcnt - number of blocks available
 * @param blksz - size in bytes of each block
 * @param buf - buffer containing data to cache
 *
 */
void blkcache_fill(int iftype, int dev,
                   lbaint_t start, lbaint_t blkcnt,
                   unsigned long blksz, void const *buffer);

/**
 * blkcache_invalidate() - discard the cache for a set of blocks
 * because of a write or device (re)initialization.
 *
 * @param iftype - IF_TYPE_x for type of device
 * @param dev - device index of particular type
 */
void blkcache_invalidate(int iftype, int dev);

/**
 * blkcache_configure() - configure block cache
 *
 * @param blocks - maximum blocks per entry
 * @param entries - maximum entries in cache
 */
void blkcache_configure(unsigned blocks, unsigned entries);

/*
 * statistics of the block cache
 */
struct block_cache_stats {
        unsigned hits;
        unsigned misses;
        unsigned entries; /* current entry count */
        unsigned max_blocks_per_entry;
        unsigned max_entries;
};

/**
 * get_blkcache_stats() - return statistics and reset
 *
 * @param stats - statistics are copied here
 */
void blkcache_stats(struct block_cache_stats *stats);

#else

static inline int blkcache_read(int iftype, int dev,
                                lbaint_t start, lbaint_t blkcnt,
                                unsigned long blksz, void *buffer)
{
        return 0;
}

static inline void blkcache_fill(int iftype, int dev,
                                 lbaint_t start, lbaint_t blkcnt,
                                 unsigned long blksz, void const *buffer) {}

static inline void blkcache_invalidate(int iftype, int dev) {}

#endif

#if CONFIG_IS_ENABLED(BLK)
struct udevice;

/* Operations on block devices */
struct blk_ops {
        /**
         * read() - read from a block device
         *
         * @dev:        Device to read from
         * @start:      Start block number to read (0=first)
         * @blkcnt:     Number of blocks to read
         * @buffer:     Destination buffer for data read
         * @return number of blocks read, or -ve error number (see the
         * IS_ERR_VALUE() macro
         */
        unsigned long (*read)(struct udevice *dev, lbaint_t start,
                              lbaint_t blkcnt, void *buffer);

        /**
         * write() - write to a block device
         *
         * @dev:        Device to write to
         * @start:      Start block number to write (0=first)
         * @blkcnt:     Number of blocks to write
         * @buffer:     Source buffer for data to write
         * @return number of blocks written, or -ve error number (see the
         * IS_ERR_VALUE() macro
         */
        unsigned long (*write)(struct udevice *dev, lbaint_t start,
                               lbaint_t blkcnt, const void *buffer);

        /**
         * erase() - erase a section of a block device
         *
         * @dev:        Device to (partially) erase
         * @start:      Start block number to erase (0=first)
         * @blkcnt:     Number of blocks to erase
         * @return number of blocks erased, or -ve error number (see the
         * IS_ERR_VALUE() macro
         */
        unsigned long (*erase)(struct udevice *dev, lbaint_t start,
                               lbaint_t blkcnt);

        /**
         * select_hwpart() - select a particular hardware partition
         *
         * Some devices (e.g. MMC) can support partitioning at the hardware
         * level. This is quite separate from the normal idea of
         * software-based partitions. MMC hardware partitions must be
         * explicitly selected. Once selected only the region of the device
         * covered by that partition is accessible.
         *
         * The MMC standard provides for two boot partitions (numbered 1 and 2),
         * rpmb (3), and up to 4 addition general-purpose partitions (4-7).
         *
         * @desc:       Block device to update
         * @hwpart:     Hardware partition number to select. 0 means the raw
         *              device, 1 is the first partition, 2 is the second, etc.
         * @return 0 if OK, -ve on error
         */
        int (*select_hwpart)(struct udevice *dev, int hwpart);
};

#define blk_get_ops(dev)        ((struct blk_ops *)(dev)->driver->ops)

/*
 * These functions should take struct udevice instead of struct blk_desc,
 * but this is convenient for migration to driver model. Add a 'd' prefix
 * to the function operations, so that blk_read(), etc. can be reserved for
 * functions with the correct arguments.
 */
unsigned long blk_dread(struct blk_desc *block_dev, lbaint_t start,
                        lbaint_t blkcnt, void *buffer);
unsigned long blk_dwrite(struct blk_desc *block_dev, lbaint_t start,
                         lbaint_t blkcnt, const void *buffer);
unsigned long blk_derase(struct blk_desc *block_dev, lbaint_t start,
                         lbaint_t blkcnt);

/**
 * blk_find_device() - Find a block device
 *
 * This function does not activate the device. The device will be returned
 * whether or not it is activated.
 *
 * @if_type:    Interface type (enum if_type_t)
 * @devnum:     Device number (specific to each interface type)
 * @devp:       the device, if found
 * @return 0 if found, -ENODEV if no device found, or other -ve error value
 */
int blk_find_device(int if_type, int devnum, struct udevice **devp);

/**
 * blk_get_device() - Find and probe a block device ready for use
 *
 * @if_type:    Interface type (enum if_type_t)
 * @devnum:     Device number (specific to each interface type)
 * @devp:       the device, if found
 * @return 0 if found, -ENODEV if no device found, or other -ve error value
 */
int blk_get_device(int if_type, int devnum, struct udevice **devp);

/**
 * blk_first_device() - Find the first device for a given interface
 *
 * The device is probed ready for use
 *
 * @devnum:     Device number (specific to each interface type)
 * @devp:       the device, if found
 * @return 0 if found, -ENODEV if no device, or other -ve error value
 */
int blk_first_device(int if_type, struct udevice **devp);

/**
 * blk_next_device() - Find the next device for a given interface
 *
 * This can be called repeatedly after blk_first_device() to iterate through
 * all devices of the given interface type.
 *
 * The device is probed ready for use
 *
 * @devp:       On entry, the previous device returned. On exit, the next
 *              device, if found
 * @return 0 if found, -ENODEV if no device, or other -ve error value
 */
int blk_next_device(struct udevice **devp);

/**
 * blk_create_device() - Create a new block device
 *
 * @parent:     Parent of the new device
 * @drv_name:   Driver name to use for the block device
 * @name:       Name for the device
 * @if_type:    Interface type (enum if_type_t)
 * @devnum:     Device number, specific to the interface type, or -1 to
 *              allocate the next available number
 * @blksz:      Block size of the device in bytes (typically 512)
 * @lba:        Total number of blocks of the device
 * @devp:       the new device (which has not been probed)
 */
int blk_create_device(struct udevice *parent, const char *drv_name,
                      const char *name, int if_type, int devnum, int blksz,
                      lbaint_t lba, struct udevice **devp);

/**
 * blk_create_devicef() - Create a new named block device
 *
 * @parent:     Parent of the new device
 * @drv_name:   Driver name to use for the block device
 * @name:       Name for the device (parent name is prepended)
 * @if_type:    Interface type (enum if_type_t)
 * @devnum:     Device number, specific to the interface type, or -1 to
 *              allocate the next available number
 * @blksz:      Block size of the device in bytes (typically 512)
 * @lba:        Total number of blocks of the device
 * @devp:       the new device (which has not been probed)
 */
int blk_create_devicef(struct udevice *parent, const char *drv_name,
                       const char *name, int if_type, int devnum, int blksz,
                       lbaint_t lba, struct udevice **devp);

/**
 * blk_unbind_all() - Unbind all device of the given interface type
 *
 * The devices are removed and then unbound.
 *
 * @if_type:    Interface type to unbind
 * @return 0 if OK, -ve on error
 */
int blk_unbind_all(int if_type);

/**
 * blk_find_max_devnum() - find the maximum device number for an interface type
 *
 * Finds the last allocated device number for an interface type @if_type. The
 * next number is safe to use for a newly allocated device.
 *
 * @if_type:    Interface type to scan
 * @return maximum device number found, or -ENODEV if none, or other -ve on
 * error
 */
int blk_find_max_devnum(enum if_type if_type);

/**
 * blk_next_free_devnum() - get the next device number for an interface type
 *
 * Finds the next number that is safe to use for a newly allocated device for
 * an interface type @if_type.
 *
 * @if_type:    Interface type to scan
 * @return next device number safe to use, or -ve on error
 */
int blk_next_free_devnum(enum if_type if_type);

/**
 * blk_select_hwpart() - select a hardware partition
 *
 * Select a hardware partition if the device supports it (typically MMC does)
 *
 * @dev:        Device to update
 * @hwpart:     Partition number to select
 * @return 0 if OK, -ve on error
 */
int blk_select_hwpart(struct udevice *dev, int hwpart);

/**
 * blk_get_from_parent() - obtain a block device by looking up its parent
 *
 * All devices with
 */
int blk_get_from_parent(struct udevice *parent, struct udevice **devp);

/**
 * blk_get_by_device() - Get the block device descriptor for the given device
 * @dev:        Instance of a storage device
 *
 * Return: With block device descriptor on success , NULL if there is no such
 *         block device.
 */
struct blk_desc *blk_get_by_device(struct udevice *dev);

#else
#include <errno.h>
/*
 * These functions should take struct udevice instead of struct blk_desc,
 * but this is convenient for migration to driver model. Add a 'd' prefix
 * to the function operations, so that blk_read(), etc. can be reserved for
 * functions with the correct arguments.
 */
static inline ulong blk_dread(struct blk_desc *block_dev, lbaint_t start,
                              lbaint_t blkcnt, void *buffer)
{
        ulong blks_read;
        if (blkcache_read(block_dev->if_type, block_dev->devnum,
                          start, blkcnt, block_dev->blksz, buffer))
                return blkcnt;

        /*
         * We could check if block_read is NULL and return -ENOSYS. But this
         * bloats the code slightly (cause some board to fail to build), and
         * it would be an error to try an operation that does not exist.
         */
        blks_read = block_dev->block_read(block_dev, start, blkcnt, buffer);
        if (blks_read == blkcnt)
                blkcache_fill(block_dev->if_type, block_dev->devnum,
                              start, blkcnt, block_dev->blksz, buffer);

        return blks_read;
}

static inline ulong blk_dwrite(struct blk_desc *block_dev, lbaint_t start,
                               lbaint_t blkcnt, const void *buffer)
{
        blkcache_invalidate(block_dev->if_type, block_dev->devnum);
        return block_dev->block_write(block_dev, start, blkcnt, buffer);
}

static inline ulong blk_derase(struct blk_desc *block_dev, lbaint_t start,
                               lbaint_t blkcnt)
{
        blkcache_invalidate(block_dev->if_type, block_dev->devnum);
        return block_dev->block_erase(block_dev, start, blkcnt);
}

/**
 * struct blk_driver - Driver for block interface types
 *
 * This provides access to the block devices for each interface type. One
 * driver should be provided using U_BOOT_LEGACY_BLK() for each interface
 * type that is to be supported.
 *
 * @if_typename:        Interface type name
 * @if_type:            Interface type
 * @max_devs:           Maximum number of devices supported
 * @desc:               Pointer to list of devices for this interface type,
 *                      or NULL to use @get_dev() instead
 */
struct blk_driver {
        const char *if_typename;
        enum if_type if_type;
        int max_devs;
        struct blk_desc *desc;
        /**
         * get_dev() - get a pointer to a block device given its number
         *
         * Each interface allocates its own devices and typically
         * struct blk_desc is contained with the interface's data structure.
         * There is no global numbering for block devices. This method allows
         * the device for an interface type to be obtained when @desc is NULL.
         *
         * @devnum:     Device number (0 for first device on that interface,
         *              1 for second, etc.
         * @descp:      Returns pointer to the block device on success
         * @return 0 if OK, -ve on error
         */
        int (*get_dev)(int devnum, struct blk_desc **descp);

        /**
         * select_hwpart() - Select a hardware partition
         *
         * Some devices (e.g. MMC) can support partitioning at the hardware
         * level. This is quite separate from the normal idea of
         * software-based partitions. MMC hardware partitions must be
         * explicitly selected. Once selected only the region of the device
         * covered by that partition is accessible.
         *
         * The MMC standard provides for two boot partitions (numbered 1 and 2),
         * rpmb (3), and up to 4 addition general-purpose partitions (4-7).
         * Partition 0 is the main user-data partition.
         *
         * @desc:       Block device descriptor
         * @hwpart:     Hardware partition number to select. 0 means the main
         *              user-data partition, 1 is the first partition, 2 is
         *              the second, etc.
         * @return 0 if OK, other value for an error
         */
        int (*select_hwpart)(struct blk_desc *desc, int hwpart);
};

/*
 * Declare a new U-Boot legacy block driver. New drivers should use driver
 * model (UCLASS_BLK).
 */
#define U_BOOT_LEGACY_BLK(__name)                                       \
        ll_entry_declare(struct blk_driver, __name, blk_driver)

struct blk_driver *blk_driver_lookup_type(int if_type);

#endif /* !CONFIG_BLK */

/**
 * blk_get_devnum_by_typename() - Get a block device by type and number
 *
 * This looks through the available block devices of the given type, returning
 * the one with the given @devnum.
 *
 * @if_type:    Block device type
 * @devnum:     Device number
 * @return point to block device descriptor, or NULL if not found
 */
struct blk_desc *blk_get_devnum_by_type(enum if_type if_type, int devnum);

/**
 * blk_get_devnum_by_type() - Get a block device by type name, and number
 *
 * This looks up the block device type based on @if_typename, then calls
 * blk_get_devnum_by_type().
 *
 * @if_typename:        Block device type name
 * @devnum:             Device number
 * @return point to block device descriptor, or NULL if not found
 */
struct blk_desc *blk_get_devnum_by_typename(const char *if_typename,
                                            int devnum);

/**
 * blk_dselect_hwpart() - select a hardware partition
 *
 * This selects a hardware partition (such as is supported by MMC). The block
 * device size may change as this effectively points the block device to a
 * partition at the hardware level. See the select_hwpart() method above.
 *
 * @desc:       Block device descriptor for the device to select
 * @hwpart:     Partition number to select
 * @return 0 if OK, -ve on error
 */
int blk_dselect_hwpart(struct blk_desc *desc, int hwpart);

/**
 * blk_list_part() - list the partitions for block devices of a given type
 *
 * This looks up the partition type for each block device of type @if_type,
 * then displays a list of partitions.
 *
 * @if_type:    Block device type
 * @return 0 if OK, -ENODEV if there is none of that type
 */
int blk_list_part(enum if_type if_type);

/**
 * blk_list_devices() - list the block devices of a given type
 *
 * This lists each block device of the type @if_type, showing the capacity
 * as well as type-specific information.
 *
 * @if_type:    Block device type
 */
void blk_list_devices(enum if_type if_type);

/**
 * blk_show_device() - show information about a given block device
 *
 * This shows the block device capacity as well as type-specific information.
 *
 * @if_type:    Block device type
 * @devnum:     Device number
 * @return 0 if OK, -ENODEV for invalid device number
 */
int blk_show_device(enum if_type if_type, int devnum);

/**
 * blk_print_device_num() - show information about a given block device
 *
 * This is similar to blk_show_device() but returns an error if the block
 * device type is unknown.
 *
 * @if_type:    Block device type
 * @devnum:     Device number
 * @return 0 if OK, -ENODEV for invalid device number, -ENOENT if the block
 * device is not connected
 */
int blk_print_device_num(enum if_type if_type, int devnum);

/**
 * blk_print_part_devnum() - print the partition information for a device
 *
 * @if_type:    Block device type
 * @devnum:     Device number
 * @return 0 if OK, -ENOENT if the block device is not connected, -ENOSYS if
 * the interface type is not supported, other -ve on other error
 */
int blk_print_part_devnum(enum if_type if_type, int devnum);

/**
 * blk_read_devnum() - read blocks from a device
 *
 * @if_type:    Block device type
 * @devnum:     Device number
 * @blkcnt:     Number of blocks to read
 * @buffer:     Address to write data to
 * @return number of blocks read, or -ve error number on error
 */
ulong blk_read_devnum(enum if_type if_type, int devnum, lbaint_t start,
                      lbaint_t blkcnt, void *buffer);

/**
 * blk_write_devnum() - write blocks to a device
 *
 * @if_type:    Block device type
 * @devnum:     Device number
 * @blkcnt:     Number of blocks to write
 * @buffer:     Address to read data from
 * @return number of blocks written, or -ve error number on error
 */
ulong blk_write_devnum(enum if_type if_type, int devnum, lbaint_t start,
                       lbaint_t blkcnt, const void *buffer);

/**
 * blk_select_hwpart_devnum() - select a hardware partition
 *
 * This is similar to blk_dselect_hwpart() but it looks up the interface and
 * device number.
 *
 * @if_type:    Block device type
 * @devnum:     Device number
 * @hwpart:     Partition number to select
 * @return 0 if OK, -ve on error
 */
int blk_select_hwpart_devnum(enum if_type if_type, int devnum, int hwpart);

/**
 * blk_get_if_type_name() - Get the name of an interface type
 *
 * @if_type: Interface type to check
 * @return name of interface, or NULL if none
 */
const char *blk_get_if_type_name(enum if_type if_type);

/**
 * blk_common_cmd() - handle common commands with block devices
 *
 * @args: Number of arguments to the command (argv[0] is the command itself)
 * @argv: Command arguments
 * @if_type: Interface type
 * @cur_devnump: Current device number for this interface type
 * @return 0 if OK, CMD_RET_ERROR on error
 */
int blk_common_cmd(int argc, char * const argv[], enum if_type if_type,
                   int *cur_devnump);

#endif