1
2
3
4
5
6
7#ifndef __MX6UL_14X14_EVK_CONFIG_H
8#define __MX6UL_14X14_EVK_CONFIG_H
9
10#include <asm/arch/imx-regs.h>
11#include <linux/sizes.h>
12#include "mx6_common.h"
13#include <asm/mach-imx/gpio.h>
14
15#define is_mx6ul_9x9_evk() CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK)
16
17
18#include "imx6_spl.h"
19
20
21#define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M)
22
23#define CONFIG_MXC_UART
24#define CONFIG_MXC_UART_BASE UART1_BASE
25
26
27#ifdef CONFIG_FSL_USDHC
28#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
29
30
31#ifdef CONFIG_NAND_MXS
32#define CONFIG_SYS_FSL_USDHC_NUM 1
33#else
34#define CONFIG_SYS_FSL_USDHC_NUM 2
35#endif
36
37#endif
38
39
40#ifdef CONFIG_CMD_I2C
41#define CONFIG_SYS_I2C_MXC
42#define CONFIG_SYS_I2C_MXC_I2C1
43#define CONFIG_SYS_I2C_MXC_I2C2
44#define CONFIG_SYS_I2C_SPEED 100000
45#endif
46
47#ifdef CONFIG_DM_GPIO
48#define CONFIG_DM_74X164
49#endif
50
51#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
52
53#define CONFIG_EXTRA_ENV_SETTINGS \
54 "script=boot.scr\0" \
55 "image=zImage\0" \
56 "console=ttymxc0\0" \
57 "fdt_high=0xffffffff\0" \
58 "initrd_high=0xffffffff\0" \
59 "fdt_file=undefined\0" \
60 "fdt_addr=0x83000000\0" \
61 "boot_fdt=try\0" \
62 "ip_dyn=yes\0" \
63 "videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
64 "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
65 "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
66 "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
67 "mmcautodetect=yes\0" \
68 "mmcargs=setenv bootargs console=${console},${baudrate} " \
69 "root=${mmcroot}\0" \
70 "loadbootscript=" \
71 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
72 "bootscript=echo Running bootscript from mmc ...; " \
73 "source\0" \
74 "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
75 "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
76 "mmcboot=echo Booting from mmc ...; " \
77 "run mmcargs; " \
78 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
79 "if run loadfdt; then " \
80 "bootz ${loadaddr} - ${fdt_addr}; " \
81 "else " \
82 "if test ${boot_fdt} = try; then " \
83 "bootz; " \
84 "else " \
85 "echo WARN: Cannot load the DT; " \
86 "fi; " \
87 "fi; " \
88 "else " \
89 "bootz; " \
90 "fi;\0" \
91 "netargs=setenv bootargs console=${console},${baudrate} " \
92 "root=/dev/nfs " \
93 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
94 "netboot=echo Booting from net ...; " \
95 "run netargs; " \
96 "if test ${ip_dyn} = yes; then " \
97 "setenv get_cmd dhcp; " \
98 "else " \
99 "setenv get_cmd tftp; " \
100 "fi; " \
101 "${get_cmd} ${image}; " \
102 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
103 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
104 "bootz ${loadaddr} - ${fdt_addr}; " \
105 "else " \
106 "if test ${boot_fdt} = try; then " \
107 "bootz; " \
108 "else " \
109 "echo WARN: Cannot load the DT; " \
110 "fi; " \
111 "fi; " \
112 "else " \
113 "bootz; " \
114 "fi;\0" \
115 "findfdt="\
116 "if test $fdt_file = undefined; then " \
117 "if test $board_name = EVK && test $board_rev = 9X9; then " \
118 "setenv fdt_file imx6ul-9x9-evk.dtb; fi; " \
119 "if test $board_name = EVK && test $board_rev = 14X14; then " \
120 "setenv fdt_file imx6ul-14x14-evk.dtb; fi; " \
121 "if test $fdt_file = undefined; then " \
122 "echo WARNING: Could not determine dtb to use; fi; " \
123 "fi;\0" \
124
125#define CONFIG_BOOTCOMMAND \
126 "run findfdt;" \
127 "mmc dev ${mmcdev};" \
128 "mmc dev ${mmcdev}; if mmc rescan; then " \
129 "if run loadbootscript; then " \
130 "run bootscript; " \
131 "else " \
132 "if run loadimage; then " \
133 "run mmcboot; " \
134 "else run netboot; " \
135 "fi; " \
136 "fi; " \
137 "else run netboot; fi"
138
139
140#define CONFIG_SYS_MEMTEST_START 0x80000000
141#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x8000000)
142
143#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
144#define CONFIG_SYS_HZ 1000
145
146
147#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
148
149#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
150#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
151#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
152
153#define CONFIG_SYS_INIT_SP_OFFSET \
154 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
155#define CONFIG_SYS_INIT_SP_ADDR \
156 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
157
158
159#define CONFIG_ENV_SIZE SZ_8K
160#define CONFIG_ENV_OFFSET (8 * SZ_64K)
161#define CONFIG_SYS_MMC_ENV_DEV 1
162#define CONFIG_SYS_MMC_ENV_PART 0
163#define CONFIG_MMCROOT "/dev/mmcblk1p2"
164
165#ifdef CONFIG_FSL_QSPI
166#define CONFIG_SYS_FSL_QSPI_AHB
167#define CONFIG_SF_DEFAULT_BUS 0
168#define CONFIG_SF_DEFAULT_CS 0
169#define CONFIG_SF_DEFAULT_SPEED 40000000
170#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
171#define FSL_QSPI_FLASH_NUM 1
172#define FSL_QSPI_FLASH_SIZE SZ_32M
173#endif
174
175
176#ifdef CONFIG_CMD_USB
177#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
178#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
179#define CONFIG_MXC_USB_FLAGS 0
180#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
181#endif
182
183#ifdef CONFIG_CMD_NET
184#define CONFIG_FEC_MXC
185#define CONFIG_FEC_ENET_DEV 1
186
187#if (CONFIG_FEC_ENET_DEV == 0)
188#define IMX_FEC_BASE ENET_BASE_ADDR
189#define CONFIG_FEC_MXC_PHYADDR 0x2
190#define CONFIG_FEC_XCV_TYPE RMII
191#define CONFIG_ETHPRIME "eth0"
192#elif (CONFIG_FEC_ENET_DEV == 1)
193#define IMX_FEC_BASE ENET2_BASE_ADDR
194#define CONFIG_FEC_MXC_PHYADDR 0x1
195#define CONFIG_FEC_XCV_TYPE RMII
196#define CONFIG_ETHPRIME "eth1"
197#endif
198#endif
199
200#define CONFIG_IMX_THERMAL
201
202#ifndef CONFIG_SPL_BUILD
203#ifdef CONFIG_VIDEO
204#define CONFIG_VIDEO_MXS
205#define CONFIG_VIDEO_LOGO
206#define CONFIG_SPLASH_SCREEN
207#define CONFIG_SPLASH_SCREEN_ALIGN
208#define CONFIG_BMP_16BPP
209#define CONFIG_VIDEO_BMP_RLE8
210#define CONFIG_VIDEO_BMP_LOGO
211#define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR
212#endif
213#endif
214
215#endif
216
