// SPDX-License-Identifier: GPL-2.0+
/*
 * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
 */

#include <common.h>
#include <div64.h>
#include <asm/io.h>
#include <linux/errno.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>

enum pll_clocks {
        PLL_SYS,        /* System PLL */
        PLL_BUS,        /* System Bus PLL*/
        PLL_USBOTG,     /* OTG USB PLL */
        PLL_ENET,       /* ENET PLL */
        PLL_AUDIO,      /* AUDIO PLL */
        PLL_VIDEO,      /* VIDEO PLL */
};

struct mxc_ccm_reg *imx_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;

#ifdef CONFIG_MXC_OCOTP
void enable_ocotp_clk(unsigned char enable)
{
        u32 reg;

        reg = __raw_readl(&imx_ccm->CCGR2);
        if (enable)
                reg |= MXC_CCM_CCGR2_OCOTP_CTRL_MASK;
        else
                reg &= ~MXC_CCM_CCGR2_OCOTP_CTRL_MASK;
        __raw_writel(reg, &imx_ccm->CCGR2);
}
#endif

#ifdef CONFIG_NAND_MXS
void setup_gpmi_io_clk(u32 cfg)
{
        /* Disable clocks per ERR007177 from MX6 errata */
        clrbits_le32(&imx_ccm->CCGR4,
                     MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
                     MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
                     MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
                     MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
                     MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK);

#if defined(CONFIG_MX6SX)
        clrbits_le32(&imx_ccm->CCGR4, MXC_CCM_CCGR4_QSPI2_ENFC_MASK);

        clrsetbits_le32(&imx_ccm->cs2cdr,
                        MXC_CCM_CS2CDR_QSPI2_CLK_PODF_MASK |
                        MXC_CCM_CS2CDR_QSPI2_CLK_PRED_MASK |
                        MXC_CCM_CS2CDR_QSPI2_CLK_SEL_MASK,
                        cfg);

        setbits_le32(&imx_ccm->CCGR4, MXC_CCM_CCGR4_QSPI2_ENFC_MASK);
#else
        clrbits_le32(&imx_ccm->CCGR2, MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_MASK);

        clrsetbits_le32(&imx_ccm->cs2cdr,
                        MXC_CCM_CS2CDR_ENFC_CLK_PODF_MASK |
                        MXC_CCM_CS2CDR_ENFC_CLK_PRED_MASK |
                        MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK,
                        cfg);

        setbits_le32(&imx_ccm->CCGR2, MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_MASK);
#endif
        setbits_le32(&imx_ccm->CCGR4,
                     MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
                     MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
                     MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
                     MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
                     MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK);
}
#endif

void enable_usboh3_clk(unsigned char enable)
{
        u32 reg;

        reg = __raw_readl(&imx_ccm->CCGR6);
        if (enable)
                reg |= MXC_CCM_CCGR6_USBOH3_MASK;
        else
                reg &= ~(MXC_CCM_CCGR6_USBOH3_MASK);
        __raw_writel(reg, &imx_ccm->CCGR6);

}

#if defined(CONFIG_FEC_MXC) && !defined(CONFIG_MX6SX)
void enable_enet_clk(unsigned char enable)
{
        u32 mask, *addr;

        if (is_mx6ull()) {
                mask = MXC_CCM_CCGR0_ENET_CLK_ENABLE_MASK;
                addr = &imx_ccm->CCGR0;
        } else if (is_mx6ul()) {
                mask = MXC_CCM_CCGR3_ENET_MASK;
                addr = &imx_ccm->CCGR3;
        } else {
                mask = MXC_CCM_CCGR1_ENET_MASK;
                addr = &imx_ccm->CCGR1;
        }

        if (enable)
                setbits_le32(addr, mask);
        else
                clrbits_le32(addr, mask);
}
#endif

#ifdef CONFIG_MXC_UART
void enable_uart_clk(unsigned char enable)
{
        u32 mask;

        if (is_mx6ul() || is_mx6ull())
                mask = MXC_CCM_CCGR5_UART_MASK;
        else
                mask = MXC_CCM_CCGR5_UART_MASK | MXC_CCM_CCGR5_UART_SERIAL_MASK;

        if (enable)
                setbits_le32(&imx_ccm->CCGR5, mask);
        else
                clrbits_le32(&imx_ccm->CCGR5, mask);
}
#endif

#ifdef CONFIG_MMC
int enable_usdhc_clk(unsigned char enable, unsigned bus_num)
{
        u32 mask;

        if (bus_num > 3)
                return -EINVAL;

        mask = MXC_CCM_CCGR_CG_MASK << (bus_num * 2 + 2);
        if (enable)
                setbits_le32(&imx_ccm->CCGR6, mask);
        else
                clrbits_le32(&imx_ccm->CCGR6, mask);

        return 0;
}
#endif

#ifdef CONFIG_SYS_I2C_MXC
/* i2c_num can be from 0 - 3 */
int enable_i2c_clk(unsigned char enable, unsigned i2c_num)
{
        u32 reg;
        u32 mask;
        u32 *addr;

        if (i2c_num > 3)
                return -EINVAL;
        if (i2c_num < 3) {
                mask = MXC_CCM_CCGR_CG_MASK
                        << (MXC_CCM_CCGR2_I2C1_SERIAL_OFFSET
                        + (i2c_num << 1));
                reg = __raw_readl(&imx_ccm->CCGR2);
                if (enable)
                        reg |= mask;
                else
                        reg &= ~mask;
                __raw_writel(reg, &imx_ccm->CCGR2);
        } else {
                if (is_mx6sll())
                        return -EINVAL;
                if (is_mx6sx() || is_mx6ul() || is_mx6ull()) {
                        mask = MXC_CCM_CCGR6_I2C4_MASK;
                        addr = &imx_ccm->CCGR6;
                } else {
                        mask = MXC_CCM_CCGR1_I2C4_SERIAL_MASK;
                        addr = &imx_ccm->CCGR1;
                }
                reg = __raw_readl(addr);
                if (enable)
                        reg |= mask;
                else
                        reg &= ~mask;
                __raw_writel(reg, addr);
        }
        return 0;
}
#endif

/* spi_num can be from 0 - SPI_MAX_NUM */
int enable_spi_clk(unsigned char enable, unsigned spi_num)
{
        u32 reg;
        u32 mask;

        if (spi_num > SPI_MAX_NUM)
                return -EINVAL;

        mask = MXC_CCM_CCGR_CG_MASK << (spi_num << 1);
        reg = __raw_readl(&imx_ccm->CCGR1);
        if (enable)
                reg |= mask;
        else
                reg &= ~mask;
        __raw_writel(reg, &imx_ccm->CCGR1);
        return 0;
}
static u32 decode_pll(enum pll_clocks pll, u32 infreq)
{
        u32 div, test_div, pll_num, pll_denom;

        switch (pll) {
        case PLL_SYS:
                div = __raw_readl(&imx_ccm->analog_pll_sys);
                div &= BM_ANADIG_PLL_SYS_DIV_SELECT;

                return (infreq * div) >> 1;
        case PLL_BUS:
                div = __raw_readl(&imx_ccm->analog_pll_528);
                div &= BM_ANADIG_PLL_528_DIV_SELECT;

                return infreq * (20 + (div << 1));
        case PLL_USBOTG:
                div = __raw_readl(&imx_ccm->analog_usb1_pll_480_ctrl);
                div &= BM_ANADIG_USB1_PLL_480_CTRL_DIV_SELECT;

                return infreq * (20 + (div << 1));
        case PLL_ENET:
                div = __raw_readl(&imx_ccm->analog_pll_enet);
                div &= BM_ANADIG_PLL_ENET_DIV_SELECT;

                return 25000000 * (div + (div >> 1) + 1);
        case PLL_AUDIO:
                div = __raw_readl(&imx_ccm->analog_pll_audio);
                if (!(div & BM_ANADIG_PLL_AUDIO_ENABLE))
                        return 0;
                /* BM_ANADIG_PLL_AUDIO_BYPASS_CLK_SRC is ignored */
                if (div & BM_ANADIG_PLL_AUDIO_BYPASS)
                        return MXC_HCLK;
                pll_num = __raw_readl(&imx_ccm->analog_pll_audio_num);
                pll_denom = __raw_readl(&imx_ccm->analog_pll_audio_denom);
                test_div = (div & BM_ANADIG_PLL_AUDIO_TEST_DIV_SELECT) >>
                        BP_ANADIG_PLL_AUDIO_TEST_DIV_SELECT;
                div &= BM_ANADIG_PLL_AUDIO_DIV_SELECT;
                if (test_div == 3) {
                        debug("Error test_div\n");
                        return 0;
                }
                test_div = 1 << (2 - test_div);

                return infreq * (div + pll_num / pll_denom) / test_div;
        case PLL_VIDEO:
                div = __raw_readl(&imx_ccm->analog_pll_video);
                if (!(div & BM_ANADIG_PLL_VIDEO_ENABLE))
                        return 0;
                /* BM_ANADIG_PLL_AUDIO_BYPASS_CLK_SRC is ignored */
                if (div & BM_ANADIG_PLL_VIDEO_BYPASS)
                        return MXC_HCLK;
                pll_num = __raw_readl(&imx_ccm->analog_pll_video_num);
                pll_denom = __raw_readl(&imx_ccm->analog_pll_video_denom);
                test_div = (div & BM_ANADIG_PLL_VIDEO_POST_DIV_SELECT) >>
                        BP_ANADIG_PLL_VIDEO_POST_DIV_SELECT;
                div &= BM_ANADIG_PLL_VIDEO_DIV_SELECT;
                if (test_div == 3) {
                        debug("Error test_div\n");
                        return 0;
                }
                test_div = 1 << (2 - test_div);

                return infreq * (div + pll_num / pll_denom) / test_div;
        default:
                return 0;
        }
        /* NOTREACHED */
}
static u32 mxc_get_pll_pfd(enum pll_clocks pll, int pfd_num)
{
        u32 div;
        u64 freq;

        switch (pll) {
        case PLL_BUS:
                if (!is_mx6ul() && !is_mx6ull()) {
                        if (pfd_num == 3) {
                                /* No PFD3 on PLL2 */
                                return 0;
                        }
                }
                div = __raw_readl(&imx_ccm->analog_pfd_528);
                freq = (u64)decode_pll(PLL_BUS, MXC_HCLK);
                break;
        case PLL_USBOTG:
                div = __raw_readl(&imx_ccm->analog_pfd_480);
                freq = (u64)decode_pll(PLL_USBOTG, MXC_HCLK);
                break;
        default:
                /* No PFD on other PLL                                       */
                return 0;
        }

        return lldiv(freq * 18, (div & ANATOP_PFD_FRAC_MASK(pfd_num)) >>
                              ANATOP_PFD_FRAC_SHIFT(pfd_num));
}

static u32 get_mcu_main_clk(void)
{
        u32 reg, freq;

        reg = __raw_readl(&imx_ccm->cacrr);
        reg &= MXC_CCM_CACRR_ARM_PODF_MASK;
        reg >>= MXC_CCM_CACRR_ARM_PODF_OFFSET;
        freq = decode_pll(PLL_SYS, MXC_HCLK);

        return freq / (reg + 1);
}

u32 get_periph_clk(void)
{
        u32 reg, div = 0, freq = 0;

        reg = __raw_readl(&imx_ccm->cbcdr);
        if (reg & MXC_CCM_CBCDR_PERIPH_CLK_SEL) {
                div = (reg & MXC_CCM_CBCDR_PERIPH_CLK2_PODF_MASK) >>
                       MXC_CCM_CBCDR_PERIPH_CLK2_PODF_OFFSET;
                reg = __raw_readl(&imx_ccm->cbcmr);
                reg &= MXC_CCM_CBCMR_PERIPH_CLK2_SEL_MASK;
                reg >>= MXC_CCM_CBCMR_PERIPH_CLK2_SEL_OFFSET;

                switch (reg) {
                case 0:
                        freq = decode_pll(PLL_USBOTG, MXC_HCLK);
                        break;
                case 1:
                case 2:
                        freq = MXC_HCLK;
                        break;
                default:
                        break;
                }
        } else {
                reg = __raw_readl(&imx_ccm->cbcmr);
                reg &= MXC_CCM_CBCMR_PRE_PERIPH_CLK_SEL_MASK;
                reg >>= MXC_CCM_CBCMR_PRE_PERIPH_CLK_SEL_OFFSET;

                switch (reg) {
                case 0:
                        freq = decode_pll(PLL_BUS, MXC_HCLK);
                        break;
                case 1:
                        freq = mxc_get_pll_pfd(PLL_BUS, 2);
                        break;
                case 2:
                        freq = mxc_get_pll_pfd(PLL_BUS, 0);
                        break;
                case 3:
                        /* static / 2 divider */
                        freq = mxc_get_pll_pfd(PLL_BUS, 2) / 2;
                        break;
                default:
                        break;
                }
        }

        return freq / (div + 1);
}

static u32 get_ipg_clk(void)
{
        u32 reg, ipg_podf;

        reg = __raw_readl(&imx_ccm->cbcdr);
        reg &= MXC_CCM_CBCDR_IPG_PODF_MASK;
        ipg_podf = reg >> MXC_CCM_CBCDR_IPG_PODF_OFFSET;

        return get_ahb_clk() / (ipg_podf + 1);
}

static u32 get_ipg_per_clk(void)
{
        u32 reg, perclk_podf;

        reg = __raw_readl(&imx_ccm->cscmr1);
        if (is_mx6sll() || is_mx6sl() || is_mx6sx() ||
            is_mx6dqp() || is_mx6ul() || is_mx6ull()) {
                if (reg & MXC_CCM_CSCMR1_PER_CLK_SEL_MASK)
                        return MXC_HCLK; /* OSC 24Mhz */
        }

        perclk_podf = reg & MXC_CCM_CSCMR1_PERCLK_PODF_MASK;

        return get_ipg_clk() / (perclk_podf + 1);
}

static u32 get_uart_clk(void)
{
        u32 reg, uart_podf;
        u32 freq = decode_pll(PLL_USBOTG, MXC_HCLK) / 6; /* static divider */
        reg = __raw_readl(&imx_ccm->cscdr1);

        if (is_mx6sl() || is_mx6sx() || is_mx6dqp() || is_mx6ul() ||
            is_mx6sll() || is_mx6ull()) {
                if (reg & MXC_CCM_CSCDR1_UART_CLK_SEL)
                        freq = MXC_HCLK;
        }

        reg &= MXC_CCM_CSCDR1_UART_CLK_PODF_MASK;
        uart_podf = reg >> MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET;

        return freq / (uart_podf + 1);
}

static u32 get_cspi_clk(void)
{
        u32 reg, cspi_podf;

        reg = __raw_readl(&imx_ccm->cscdr2);
        cspi_podf = (reg & MXC_CCM_CSCDR2_ECSPI_CLK_PODF_MASK) >>
                     MXC_CCM_CSCDR2_ECSPI_CLK_PODF_OFFSET;

        if (is_mx6dqp() || is_mx6sl() || is_mx6sx() || is_mx6ul() ||
            is_mx6sll() || is_mx6ull()) {
                if (reg & MXC_CCM_CSCDR2_ECSPI_CLK_SEL_MASK)
                        return MXC_HCLK / (cspi_podf + 1);
        }

        return  decode_pll(PLL_USBOTG, MXC_HCLK) / (8 * (cspi_podf + 1));
}

static u32 get_axi_clk(void)
{
        u32 root_freq, axi_podf;
        u32 cbcdr =  __raw_readl(&imx_ccm->cbcdr);

        axi_podf = cbcdr & MXC_CCM_CBCDR_AXI_PODF_MASK;
        axi_podf >>= MXC_CCM_CBCDR_AXI_PODF_OFFSET;

        if (cbcdr & MXC_CCM_CBCDR_AXI_SEL) {
                if (cbcdr & MXC_CCM_CBCDR_AXI_ALT_SEL)
                        root_freq = mxc_get_pll_pfd(PLL_USBOTG, 1);
                else
                        root_freq = mxc_get_pll_pfd(PLL_BUS, 2);
        } else
                root_freq = get_periph_clk();

        return  root_freq / (axi_podf + 1);
}

static u32 get_emi_slow_clk(void)
{
        u32 emi_clk_sel, emi_slow_podf, cscmr1, root_freq = 0;

        cscmr1 =  __raw_readl(&imx_ccm->cscmr1);
        emi_clk_sel = cscmr1 & MXC_CCM_CSCMR1_ACLK_EMI_SLOW_MASK;
        emi_clk_sel >>= MXC_CCM_CSCMR1_ACLK_EMI_SLOW_OFFSET;
        emi_slow_podf = cscmr1 & MXC_CCM_CSCMR1_ACLK_EMI_SLOW_PODF_MASK;
        emi_slow_podf >>= MXC_CCM_CSCMR1_ACLK_EMI_SLOW_PODF_OFFSET;

        switch (emi_clk_sel) {
        case 0:
                root_freq = get_axi_clk();
                break;
        case 1:
                root_freq = decode_pll(PLL_USBOTG, MXC_HCLK);
                break;
        case 2:
                root_freq =  mxc_get_pll_pfd(PLL_BUS, 2);
                break;
        case 3:
                root_freq =  mxc_get_pll_pfd(PLL_BUS, 0);
                break;
        }

        return root_freq / (emi_slow_podf + 1);
}

static u32 get_mmdc_ch0_clk(void)
{
        u32 cbcmr = __raw_readl(&imx_ccm->cbcmr);
        u32 cbcdr = __raw_readl(&imx_ccm->cbcdr);

        u32 freq, podf, per2_clk2_podf, pmu_misc2_audio_div;

        if (is_mx6sx() || is_mx6ul() || is_mx6ull() || is_mx6sl() ||
            is_mx6sll()) {
                podf = (cbcdr & MXC_CCM_CBCDR_MMDC_CH1_PODF_MASK) >>
                        MXC_CCM_CBCDR_MMDC_CH1_PODF_OFFSET;
                if (cbcdr & MXC_CCM_CBCDR_PERIPH2_CLK_SEL) {
                        per2_clk2_podf = (cbcdr & MXC_CCM_CBCDR_PERIPH2_CLK2_PODF_MASK) >>
                                MXC_CCM_CBCDR_PERIPH2_CLK2_PODF_OFFSET;
                        if (is_mx6sl()) {
                                if (cbcmr & MXC_CCM_CBCMR_PERIPH2_CLK2_SEL)
                                        freq = MXC_HCLK;
                                else
                                        freq = decode_pll(PLL_USBOTG, MXC_HCLK);
                        } else {
                                if (cbcmr & MXC_CCM_CBCMR_PERIPH2_CLK2_SEL)
                                        freq = decode_pll(PLL_BUS, MXC_HCLK);
                                else
                                        freq = decode_pll(PLL_USBOTG, MXC_HCLK);
                        }
                } else {
                        per2_clk2_podf = 0;
                        switch ((cbcmr &
                                MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_MASK) >>
                                MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_OFFSET) {
                        case 0:
                                freq = decode_pll(PLL_BUS, MXC_HCLK);
                                break;
                        case 1:
                                freq = mxc_get_pll_pfd(PLL_BUS, 2);
                                break;
                        case 2:
                                freq = mxc_get_pll_pfd(PLL_BUS, 0);
                                break;
                        case 3:
                                if (is_mx6sl()) {
                                        freq = mxc_get_pll_pfd(PLL_BUS, 2) >> 1;
                                        break;
                                }

                                pmu_misc2_audio_div = PMU_MISC2_AUDIO_DIV(__raw_readl(&imx_ccm->pmu_misc2));
                                switch (pmu_misc2_audio_div) {
                                case 0:
                                case 2:
                                        pmu_misc2_audio_div = 1;
                                        break;
                                case 1:
                                        pmu_misc2_audio_div = 2;
                                        break;
                                case 3:
                                        pmu_misc2_audio_div = 4;
                                        break;
                                }
                                freq = decode_pll(PLL_AUDIO, MXC_HCLK) /
                                        pmu_misc2_audio_div;
                                break;
                        }
                }
                return freq / (podf + 1) / (per2_clk2_podf + 1);
        } else {
                podf = (cbcdr & MXC_CCM_CBCDR_MMDC_CH0_PODF_MASK) >>
                        MXC_CCM_CBCDR_MMDC_CH0_PODF_OFFSET;
                return get_periph_clk() / (podf + 1);
        }
}

#if defined(CONFIG_VIDEO_MXS)
static int enable_pll_video(u32 pll_div, u32 pll_num, u32 pll_denom,
                            u32 post_div)
{
        u32 reg = 0;
        ulong start;

        debug("pll5 div = %d, num = %d, denom = %d\n",
              pll_div, pll_num, pll_denom);

        /* Power up PLL5 video */
        writel(BM_ANADIG_PLL_VIDEO_POWERDOWN |
               BM_ANADIG_PLL_VIDEO_BYPASS |
               BM_ANADIG_PLL_VIDEO_DIV_SELECT |
               BM_ANADIG_PLL_VIDEO_POST_DIV_SELECT,
               &imx_ccm->analog_pll_video_clr);

        /* Set div, num and denom */
        switch (post_div) {
        case 1:
                writel(BF_ANADIG_PLL_VIDEO_DIV_SELECT(pll_div) |
                       BF_ANADIG_PLL_VIDEO_POST_DIV_SELECT(0x2),
                       &imx_ccm->analog_pll_video_set);
                break;
        case 2:
                writel(BF_ANADIG_PLL_VIDEO_DIV_SELECT(pll_div) |
                       BF_ANADIG_PLL_VIDEO_POST_DIV_SELECT(0x1),
                       &imx_ccm->analog_pll_video_set);
                break;
        case 4:
                writel(BF_ANADIG_PLL_VIDEO_DIV_SELECT(pll_div) |
                       BF_ANADIG_PLL_VIDEO_POST_DIV_SELECT(0x0),
                       &imx_ccm->analog_pll_video_set);
                break;
        default:
                puts("Wrong test_div!\n");
                return -EINVAL;
        }

        writel(BF_ANADIG_PLL_VIDEO_NUM_A(pll_num),
               &imx_ccm->analog_pll_video_num);
        writel(BF_ANADIG_PLL_VIDEO_DENOM_B(pll_denom),
               &imx_ccm->analog_pll_video_denom);

        /* Wait PLL5 lock */
        start = get_timer(0);   /* Get current timestamp */

        do {
                reg = readl(&imx_ccm->analog_pll_video);
                if (reg & BM_ANADIG_PLL_VIDEO_LOCK) {
                        /* Enable PLL out */
                        writel(BM_ANADIG_PLL_VIDEO_ENABLE,
                               &imx_ccm->analog_pll_video_set);
                        return 0;
                }
        } while (get_timer(0) < (start + 10)); /* Wait 10ms */

        puts("Lock PLL5 timeout\n");

        return -ETIME;
}

/*
 * 24M--> PLL_VIDEO -> LCDIFx_PRED -> LCDIFx_PODF -> LCD
 *
 * 'freq' using KHz as unit, see driver/video/mxsfb.c.
 */
void mxs_set_lcdclk(u32 base_addr, u32 freq)
{
        u32 reg = 0;
        u32 hck = MXC_HCLK / 1000;
        /* DIV_SELECT ranges from 27 to 54 */
        u32 min = hck * 27;
        u32 max = hck * 54;
        u32 temp, best = 0;
        u32 i, j, max_pred = 8, max_postd = 8, pred = 1, postd = 1;
        u32 pll_div, pll_num, pll_denom, post_div = 1;

        debug("mxs_set_lcdclk, freq = %dKHz\n", freq);

        if (!is_mx6sx() && !is_mx6ul() && !is_mx6ull() && !is_mx6sl() &&
            !is_mx6sll()) {
                debug("This chip not support lcd!\n");
                return;
        }

        if (!is_mx6sl()) {
                if (base_addr == LCDIF1_BASE_ADDR) {
                        reg = readl(&imx_ccm->cscdr2);
                        /* Can't change clocks when clock not from pre-mux */
                        if ((reg & MXC_CCM_CSCDR2_LCDIF1_CLK_SEL_MASK) != 0)
                                return;
                }
        }

        if (is_mx6sx()) {
                reg = readl(&imx_ccm->cscdr2);
                /* Can't change clocks when clock not from pre-mux */
                if ((reg & MXC_CCM_CSCDR2_LCDIF2_CLK_SEL_MASK) != 0)
                        return;
        }

        temp = freq * max_pred * max_postd;
        if (temp < min) {
                /*
                 * Register: PLL_VIDEO
                 * Bit Field: POST_DIV_SELECT
                 * 00 — Divide by 4.
                 * 01 — Divide by 2.
                 * 10 — Divide by 1.
                 * 11 — Reserved
                 * No need to check post_div(1)
                 */
                for (post_div = 2; post_div <= 4; post_div <<= 1) {
                        if ((temp * post_div) > min) {
                                freq *= post_div;
                                break;
                        }
                }

                if (post_div > 4) {
                        printf("Fail to set rate to %dkhz", freq);
                        return;
                }
        }

        /* Choose the best pred and postd to match freq for lcd */
        for (i = 1; i <= max_pred; i++) {
                for (j = 1; j <= max_postd; j++) {
                        temp = freq * i * j;
                        if (temp > max || temp < min)
                                continue;
                        if (best == 0 || temp < best) {
                                best = temp;
                                pred = i;
                                postd = j;
                        }
                }
        }

        if (best == 0) {
                printf("Fail to set rate to %dKHz", freq);
                return;
        }

        debug("best %d, pred = %d, postd = %d\n", best, pred, postd);

        pll_div = best / hck;
        pll_denom = 1000000;
        pll_num = (best - hck * pll_div) * pll_denom / hck;

        /*
         *                                  pll_num
         *             (24MHz * (pll_div + --------- ))
         *                                 pll_denom
         *freq KHz =  --------------------------------
         *             post_div * pred * postd * 1000
         */

        if (base_addr == LCDIF1_BASE_ADDR) {
                if (enable_pll_video(pll_div, pll_num, pll_denom, post_div))
                        return;

                enable_lcdif_clock(base_addr, 0);
                if (!is_mx6sl()) {
                        /* Select pre-lcd clock to PLL5 and set pre divider */
                        clrsetbits_le32(&imx_ccm->cscdr2,
                                        MXC_CCM_CSCDR2_LCDIF1_PRED_SEL_MASK |
                                        MXC_CCM_CSCDR2_LCDIF1_PRE_DIV_MASK,
                                        (0x2 << MXC_CCM_CSCDR2_LCDIF1_PRED_SEL_OFFSET) |
                                        ((pred - 1) <<
                                         MXC_CCM_CSCDR2_LCDIF1_PRE_DIV_OFFSET));

                        /* Set the post divider */
                        clrsetbits_le32(&imx_ccm->cbcmr,
                                        MXC_CCM_CBCMR_LCDIF1_PODF_MASK,
                                        ((postd - 1) <<
                                        MXC_CCM_CBCMR_LCDIF1_PODF_OFFSET));
                } else {
                        /* Select pre-lcd clock to PLL5 and set pre divider */
                        clrsetbits_le32(&imx_ccm->cscdr2,
                                        MXC_CCM_CSCDR2_LCDIF_PIX_CLK_SEL_MASK |
                                        MXC_CCM_CSCDR2_LCDIF_PIX_PRE_DIV_MASK,
                                        (0x2 << MXC_CCM_CSCDR2_LCDIF_PIX_CLK_SEL_OFFSET) |
                                        ((pred - 1) <<
                                         MXC_CCM_CSCDR2_LCDIF_PIX_PRE_DIV_OFFSET));

                        /* Set the post divider */
                        clrsetbits_le32(&imx_ccm->cscmr1,
                                        MXC_CCM_CSCMR1_LCDIF_PIX_PODF_MASK,
                                        (((postd - 1)^0x6) <<
                                         MXC_CCM_CSCMR1_LCDIF_PIX_PODF_OFFSET));
                }

                enable_lcdif_clock(base_addr, 1);
        } else if (is_mx6sx()) {
                /* Setting LCDIF2 for i.MX6SX */
                if (enable_pll_video(pll_div, pll_num, pll_denom, post_div))
                        return;

                enable_lcdif_clock(base_addr, 0);
                /* Select pre-lcd clock to PLL5 and set pre divider */
                clrsetbits_le32(&imx_ccm->cscdr2,
                                MXC_CCM_CSCDR2_LCDIF2_PRED_SEL_MASK |
                                MXC_CCM_CSCDR2_LCDIF2_PRE_DIV_MASK,
                                (0x2 << MXC_CCM_CSCDR2_LCDIF2_PRED_SEL_OFFSET) |
                                ((pred - 1) <<
                                 MXC_CCM_CSCDR2_LCDIF2_PRE_DIV_OFFSET));

                /* Set the post divider */
                clrsetbits_le32(&imx_ccm->cscmr1,
                                MXC_CCM_CSCMR1_LCDIF2_PODF_MASK,
                                ((postd - 1) <<
                                 MXC_CCM_CSCMR1_LCDIF2_PODF_OFFSET));

                enable_lcdif_clock(base_addr, 1);
        }
}

int enable_lcdif_clock(u32 base_addr, bool enable)
{
        u32 reg = 0;
        u32 lcdif_clk_sel_mask, lcdif_ccgr3_mask;

        if (is_mx6sx()) {
                if ((base_addr != LCDIF1_BASE_ADDR) &&
                    (base_addr != LCDIF2_BASE_ADDR)) {
                        puts("Wrong LCD interface!\n");
                        return -EINVAL;
                }
                /* Set to pre-mux clock at default */
                lcdif_clk_sel_mask = (base_addr == LCDIF2_BASE_ADDR) ?
                        MXC_CCM_CSCDR2_LCDIF2_CLK_SEL_MASK :
                        MXC_CCM_CSCDR2_LCDIF1_CLK_SEL_MASK;
                lcdif_ccgr3_mask = (base_addr == LCDIF2_BASE_ADDR) ?
                        (MXC_CCM_CCGR3_LCDIF2_PIX_MASK |
                         MXC_CCM_CCGR3_DISP_AXI_MASK) :
                        (MXC_CCM_CCGR3_LCDIF1_PIX_MASK |
                         MXC_CCM_CCGR3_DISP_AXI_MASK);
        } else if (is_mx6ul() || is_mx6ull() || is_mx6sll()) {
                if (base_addr != LCDIF1_BASE_ADDR) {
                        puts("Wrong LCD interface!\n");
                        return -EINVAL;
                }
                /* Set to pre-mux clock at default */
                lcdif_clk_sel_mask = MXC_CCM_CSCDR2_LCDIF1_CLK_SEL_MASK;
                lcdif_ccgr3_mask =  MXC_CCM_CCGR3_LCDIF1_PIX_MASK;
        } else if (is_mx6sl()) {
                if (base_addr != LCDIF1_BASE_ADDR) {
                        puts("Wrong LCD interface!\n");
                        return -EINVAL;
                }

                reg = readl(&imx_ccm->CCGR3);
                reg &= ~(MXC_CCM_CCGR3_LCDIF_AXI_MASK |
                         MXC_CCM_CCGR3_LCDIF_PIX_MASK);
                writel(reg, &imx_ccm->CCGR3);

                if (enable) {
                        reg = readl(&imx_ccm->cscdr3);
                        reg &= ~MXC_CCM_CSCDR3_LCDIF_AXI_CLK_SEL_MASK;
                        reg |= 1 << MXC_CCM_CSCDR3_LCDIF_AXI_CLK_SEL_OFFSET;
                        writel(reg, &imx_ccm->cscdr3);

                        reg = readl(&imx_ccm->CCGR3);
                        reg |= MXC_CCM_CCGR3_LCDIF_AXI_MASK |
                                MXC_CCM_CCGR3_LCDIF_PIX_MASK;
                        writel(reg, &imx_ccm->CCGR3);
                }

                return 0;
        } else {
                return 0;
        }

        /* Gate LCDIF clock first */
        reg = readl(&imx_ccm->CCGR3);
        reg &= ~lcdif_ccgr3_mask;
        writel(reg, &imx_ccm->CCGR3);

        reg = readl(&imx_ccm->CCGR2);
        reg &= ~MXC_CCM_CCGR2_LCD_MASK;
        writel(reg, &imx_ccm->CCGR2);

        if (enable) {
                /* Select pre-mux */
                reg = readl(&imx_ccm->cscdr2);
                reg &= ~lcdif_clk_sel_mask;
                writel(reg, &imx_ccm->cscdr2);

                /* Enable the LCDIF pix clock */
                reg = readl(&imx_ccm->CCGR3);
                reg |= lcdif_ccgr3_mask;
                writel(reg, &imx_ccm->CCGR3);

                reg = readl(&imx_ccm->CCGR2);
                reg |= MXC_CCM_CCGR2_LCD_MASK;
                writel(reg, &imx_ccm->CCGR2);
        }

        return 0;
}
#endif

#ifdef CONFIG_FSL_QSPI
/* qspi_num can be from 0 - 1 */
void enable_qspi_clk(int qspi_num)
{
        u32 reg = 0;
        /* Enable QuadSPI clock */
        switch (qspi_num) {
        case 0:
                /* disable the clock gate */
                clrbits_le32(&imx_ccm->CCGR3, MXC_CCM_CCGR3_QSPI1_MASK);

                /* set 50M  : (50 = 396 / 2 / 4) */
                reg = readl(&imx_ccm->cscmr1);
                reg &= ~(MXC_CCM_CSCMR1_QSPI1_PODF_MASK |
                         MXC_CCM_CSCMR1_QSPI1_CLK_SEL_MASK);
                reg |= ((1 << MXC_CCM_CSCMR1_QSPI1_PODF_OFFSET) |
                        (2 << MXC_CCM_CSCMR1_QSPI1_CLK_SEL_OFFSET));
                writel(reg, &imx_ccm->cscmr1);

                /* enable the clock gate */
                setbits_le32(&imx_ccm->CCGR3, MXC_CCM_CCGR3_QSPI1_MASK);
                break;
        case 1:
                /*
                 * disable the clock gate
                 * QSPI2 and GPMI_BCH_INPUT_GPMI_IO share the same clock gate,
                 * disable both of them.
                 */
                clrbits_le32(&imx_ccm->CCGR4, MXC_CCM_CCGR4_QSPI2_ENFC_MASK |
                             MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK);

                /* set 50M  : (50 = 396 / 2 / 4) */
                reg = readl(&imx_ccm->cs2cdr);
                reg &= ~(MXC_CCM_CS2CDR_QSPI2_CLK_PODF_MASK |
                         MXC_CCM_CS2CDR_QSPI2_CLK_PRED_MASK |
                         MXC_CCM_CS2CDR_QSPI2_CLK_SEL_MASK);
                reg |= (MXC_CCM_CS2CDR_QSPI2_CLK_PRED(0x1) |
                        MXC_CCM_CS2CDR_QSPI2_CLK_SEL(0x3));
                writel(reg, &imx_ccm->cs2cdr);

                /*enable the clock gate*/
                setbits_le32(&imx_ccm->CCGR4, MXC_CCM_CCGR4_QSPI2_ENFC_MASK |
                             MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK);
                break;
        default:
                break;
        }
}
#endif

#ifdef CONFIG_FEC_MXC
int enable_fec_anatop_clock(int fec_id, enum enet_freq freq)
{
        u32 reg = 0;
        s32 timeout = 100000;

        struct anatop_regs __iomem *anatop =
                (struct anatop_regs __iomem *)ANATOP_BASE_ADDR;

        if (freq < ENET_25MHZ || freq > ENET_125MHZ)
                return -EINVAL;

        reg = readl(&anatop->pll_enet);

        if (fec_id == 0) {
                reg &= ~BM_ANADIG_PLL_ENET_DIV_SELECT;
                reg |= BF_ANADIG_PLL_ENET_DIV_SELECT(freq);
        } else if (fec_id == 1) {
                /* Only i.MX6SX/UL support ENET2 */
                if (!(is_mx6sx() || is_mx6ul() || is_mx6ull()))
                        return -EINVAL;
                reg &= ~BM_ANADIG_PLL_ENET2_DIV_SELECT;
                reg |= BF_ANADIG_PLL_ENET2_DIV_SELECT(freq);
        } else {
                return -EINVAL;
        }

        if ((reg & BM_ANADIG_PLL_ENET_POWERDOWN) ||
            (!(reg & BM_ANADIG_PLL_ENET_LOCK))) {
                reg &= ~BM_ANADIG_PLL_ENET_POWERDOWN;
                writel(reg, &anatop->pll_enet);
                while (timeout--) {
                        if (readl(&anatop->pll_enet) & BM_ANADIG_PLL_ENET_LOCK)
                                break;
                }
                if (timeout < 0)
                        return -ETIMEDOUT;
        }

        /* Enable FEC clock */
        if (fec_id == 0)
                reg |= BM_ANADIG_PLL_ENET_ENABLE;
        else
                reg |= BM_ANADIG_PLL_ENET2_ENABLE;
        reg &= ~BM_ANADIG_PLL_ENET_BYPASS;
        writel(reg, &anatop->pll_enet);

#ifdef CONFIG_MX6SX
        /* Disable enet system clcok before switching clock parent */
        reg = readl(&imx_ccm->CCGR3);
        reg &= ~MXC_CCM_CCGR3_ENET_MASK;
        writel(reg, &imx_ccm->CCGR3);

        /*
         * Set enet ahb clock to 200MHz
         * pll2_pfd2_396m-> ENET_PODF-> ENET_AHB
         */
        reg = readl(&imx_ccm->chsccdr);
        reg &= ~(MXC_CCM_CHSCCDR_ENET_PRE_CLK_SEL_MASK
                 | MXC_CCM_CHSCCDR_ENET_PODF_MASK
                 | MXC_CCM_CHSCCDR_ENET_CLK_SEL_MASK);
        /* PLL2 PFD2 */
        reg |= (4 << MXC_CCM_CHSCCDR_ENET_PRE_CLK_SEL_OFFSET);
        /* Div = 2*/
        reg |= (1 << MXC_CCM_CHSCCDR_ENET_PODF_OFFSET);
        reg |= (0 << MXC_CCM_CHSCCDR_ENET_CLK_SEL_OFFSET);
        writel(reg, &imx_ccm->chsccdr);

        /* Enable enet system clock */
        reg = readl(&imx_ccm->CCGR3);
        reg |= MXC_CCM_CCGR3_ENET_MASK;
        writel(reg, &imx_ccm->CCGR3);
#endif
        return 0;
}
#endif

static u32 get_usdhc_clk(u32 port)
{
        u32 root_freq = 0, usdhc_podf = 0, clk_sel = 0;
        u32 cscmr1 = __raw_readl(&imx_ccm->cscmr1);
        u32 cscdr1 = __raw_readl(&imx_ccm->cscdr1);

        if (is_mx6ul() || is_mx6ull()) {
                if (port > 1)
                        return 0;
        }

        if (is_mx6sll()) {
                if (port > 2)
                        return 0;
        }

        switch (port) {
        case 0:
                usdhc_podf = (cscdr1 & MXC_CCM_CSCDR1_USDHC1_PODF_MASK) >>
                                        MXC_CCM_CSCDR1_USDHC1_PODF_OFFSET;

                clk_sel = cscmr1 & MXC_CCM_CSCMR1_USDHC1_CLK_SEL;

                break;
        case 1:
                usdhc_podf = (cscdr1 & MXC_CCM_CSCDR1_USDHC2_PODF_MASK) >>
                                        MXC_CCM_CSCDR1_USDHC2_PODF_OFFSET;
                clk_sel = cscmr1 & MXC_CCM_CSCMR1_USDHC2_CLK_SEL;

                break;
        case 2:
                usdhc_podf = (cscdr1 & MXC_CCM_CSCDR1_USDHC3_PODF_MASK) >>
                                        MXC_CCM_CSCDR1_USDHC3_PODF_OFFSET;
                clk_sel = cscmr1 & MXC_CCM_CSCMR1_USDHC3_CLK_SEL;

                break;
        case 3:
                usdhc_podf = (cscdr1 & MXC_CCM_CSCDR1_USDHC4_PODF_MASK) >>
                                        MXC_CCM_CSCDR1_USDHC4_PODF_OFFSET;
                clk_sel = cscmr1 & MXC_CCM_CSCMR1_USDHC4_CLK_SEL;

                break;
        default:
                break;
        }

        if (clk_sel)
                root_freq = mxc_get_pll_pfd(PLL_BUS, 0);
        else
                root_freq = mxc_get_pll_pfd(PLL_BUS, 2);

        return root_freq / (usdhc_podf + 1);
}

u32 imx_get_uartclk(void)
{
        return get_uart_clk();
}

u32 imx_get_fecclk(void)
{
        return mxc_get_clock(MXC_IPG_CLK);
}

#if defined(CONFIG_SATA) || defined(CONFIG_PCIE_IMX)
static int enable_enet_pll(uint32_t en)
{
        struct mxc_ccm_reg *const imx_ccm
                = (struct mxc_ccm_reg *) CCM_BASE_ADDR;
        s32 timeout = 100000;
        u32 reg = 0;

        /* Enable PLLs */
        reg = readl(&imx_ccm->analog_pll_enet);
        reg &= ~BM_ANADIG_PLL_SYS_POWERDOWN;
        writel(reg, &imx_ccm->analog_pll_enet);
        reg |= BM_ANADIG_PLL_SYS_ENABLE;
        while (timeout--) {
                if (readl(&imx_ccm->analog_pll_enet) & BM_ANADIG_PLL_SYS_LOCK)
                        break;
        }
        if (timeout <= 0)
                return -EIO;
        reg &= ~BM_ANADIG_PLL_SYS_BYPASS;
        writel(reg, &imx_ccm->analog_pll_enet);
        reg |= en;
        writel(reg, &imx_ccm->analog_pll_enet);
        return 0;
}
#endif

#ifdef CONFIG_SATA
static void ungate_sata_clock(void)
{
        struct mxc_ccm_reg *const imx_ccm =
                (struct mxc_ccm_reg *)CCM_BASE_ADDR;

        /* Enable SATA clock. */
        setbits_le32(&imx_ccm->CCGR5, MXC_CCM_CCGR5_SATA_MASK);
}

int enable_sata_clock(void)
{
        ungate_sata_clock();
        return enable_enet_pll(BM_ANADIG_PLL_ENET_ENABLE_SATA);
}

void disable_sata_clock(void)
{
        struct mxc_ccm_reg *const imx_ccm =
                (struct mxc_ccm_reg *)CCM_BASE_ADDR;

        clrbits_le32(&imx_ccm->CCGR5, MXC_CCM_CCGR5_SATA_MASK);
}
#endif

#ifdef CONFIG_PCIE_IMX
static void ungate_pcie_clock(void)
{
        struct mxc_ccm_reg *const imx_ccm =
                (struct mxc_ccm_reg *)CCM_BASE_ADDR;

        /* Enable PCIe clock. */
        setbits_le32(&imx_ccm->CCGR4, MXC_CCM_CCGR4_PCIE_MASK);
}

int enable_pcie_clock(void)
{
        struct anatop_regs *anatop_regs =
                (struct anatop_regs *)ANATOP_BASE_ADDR;
        struct mxc_ccm_reg *ccm_regs = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
        u32 lvds1_clk_sel;

        /*
         * Here be dragons!
         *
         * The register ANATOP_MISC1 is not documented in the Freescale
         * MX6RM. The register that is mapped in the ANATOP space and
         * marked as ANATOP_MISC1 is actually documented in the PMU section
         * of the datasheet as PMU_MISC1.
         *
         * Switch LVDS clock source to SATA (0xb) on mx6q/dl or PCI (0xa) on
         * mx6sx, disable clock INPUT and enable clock OUTPUT. This is important
         * for PCI express link that is clocked from the i.MX6.
         */
#define ANADIG_ANA_MISC1_LVDSCLK1_IBEN          (1 << 12)
#define ANADIG_ANA_MISC1_LVDSCLK1_OBEN          (1 << 10)
#define ANADIG_ANA_MISC1_LVDS1_CLK_SEL_MASK     0x0000001F
#define ANADIG_ANA_MISC1_LVDS1_CLK_SEL_PCIE_REF 0xa
#define ANADIG_ANA_MISC1_LVDS1_CLK_SEL_SATA_REF 0xb

        if (is_mx6sx())
                lvds1_clk_sel = ANADIG_ANA_MISC1_LVDS1_CLK_SEL_PCIE_REF;
        else
                lvds1_clk_sel = ANADIG_ANA_MISC1_LVDS1_CLK_SEL_SATA_REF;

        clrsetbits_le32(&anatop_regs->ana_misc1,
                        ANADIG_ANA_MISC1_LVDSCLK1_IBEN |
                        ANADIG_ANA_MISC1_LVDS1_CLK_SEL_MASK,
                        ANADIG_ANA_MISC1_LVDSCLK1_OBEN | lvds1_clk_sel);

        /* PCIe reference clock sourced from AXI. */
        clrbits_le32(&ccm_regs->cbcmr, MXC_CCM_CBCMR_PCIE_AXI_CLK_SEL);

        /* Party time! Ungate the clock to the PCIe. */
#ifdef CONFIG_SATA
        ungate_sata_clock();
#endif
        ungate_pcie_clock();

        return enable_enet_pll(BM_ANADIG_PLL_ENET_ENABLE_SATA |
                               BM_ANADIG_PLL_ENET_ENABLE_PCIE);
}
#endif

#ifdef CONFIG_IMX_HAB
void hab_caam_clock_enable(unsigned char enable)
{
        u32 reg;

        if (is_mx6ull() || is_mx6sll()) {
                /* CG5, DCP clock */
                reg = __raw_readl(&imx_ccm->CCGR0);
                if (enable)
                        reg |= MXC_CCM_CCGR0_DCP_CLK_MASK;
                else
                        reg &= ~MXC_CCM_CCGR0_DCP_CLK_MASK;
                __raw_writel(reg, &imx_ccm->CCGR0);
        } else {
                /* CG4 ~ CG6, CAAM clocks */
                reg = __raw_readl(&imx_ccm->CCGR0);
                if (enable)
                        reg |= (MXC_CCM_CCGR0_CAAM_WRAPPER_IPG_MASK |
                                MXC_CCM_CCGR0_CAAM_WRAPPER_ACLK_MASK |
                                MXC_CCM_CCGR0_CAAM_SECURE_MEM_MASK);
                else
                        reg &= ~(MXC_CCM_CCGR0_CAAM_WRAPPER_IPG_MASK |
                                MXC_CCM_CCGR0_CAAM_WRAPPER_ACLK_MASK |
                                MXC_CCM_CCGR0_CAAM_SECURE_MEM_MASK);
                __raw_writel(reg, &imx_ccm->CCGR0);
        }

        /* EMI slow clk */
        reg = __raw_readl(&imx_ccm->CCGR6);
        if (enable)
                reg |= MXC_CCM_CCGR6_EMI_SLOW_MASK;
        else
                reg &= ~MXC_CCM_CCGR6_EMI_SLOW_MASK;
        __raw_writel(reg, &imx_ccm->CCGR6);
}
#endif

static void enable_pll3(void)
{
        struct anatop_regs __iomem *anatop =
                (struct anatop_regs __iomem *)ANATOP_BASE_ADDR;

        /* make sure pll3 is enabled */
        if ((readl(&anatop->usb1_pll_480_ctrl) &
                        BM_ANADIG_USB1_PLL_480_CTRL_LOCK) == 0) {
                /* enable pll's power */
                writel(BM_ANADIG_USB1_PLL_480_CTRL_POWER,
                       &anatop->usb1_pll_480_ctrl_set);
                writel(0x80, &anatop->ana_misc2_clr);
                /* wait for pll lock */
                while ((readl(&anatop->usb1_pll_480_ctrl) &
                        BM_ANADIG_USB1_PLL_480_CTRL_LOCK) == 0)
                        ;
                /* disable bypass */
                writel(BM_ANADIG_USB1_PLL_480_CTRL_BYPASS,
                       &anatop->usb1_pll_480_ctrl_clr);
                /* enable pll output */
                writel(BM_ANADIG_USB1_PLL_480_CTRL_ENABLE,
                       &anatop->usb1_pll_480_ctrl_set);
        }
}

void enable_thermal_clk(void)
{
        enable_pll3();
}

#ifdef CONFIG_MTD_NOR_FLASH
void enable_eim_clk(unsigned char enable)
{
        u32 reg;

        reg = __raw_readl(&imx_ccm->CCGR6);
        if (enable)
                reg |= MXC_CCM_CCGR6_EMI_SLOW_MASK;
        else
                reg &= ~MXC_CCM_CCGR6_EMI_SLOW_MASK;
        __raw_writel(reg, &imx_ccm->CCGR6);
}
#endif

unsigned int mxc_get_clock(enum mxc_clock clk)
{
        switch (clk) {
        case MXC_ARM_CLK:
                return get_mcu_main_clk();
        case MXC_PER_CLK:
                return get_periph_clk();
        case MXC_AHB_CLK:
                return get_ahb_clk();
        case MXC_IPG_CLK:
                return get_ipg_clk();
        case MXC_IPG_PERCLK:
        case MXC_I2C_CLK:
                return get_ipg_per_clk();
        case MXC_UART_CLK:
                return get_uart_clk();
        case MXC_CSPI_CLK:
                return get_cspi_clk();
        case MXC_AXI_CLK:
                return get_axi_clk();
        case MXC_EMI_SLOW_CLK:
                return get_emi_slow_clk();
        case MXC_DDR_CLK:
                return get_mmdc_ch0_clk();
        case MXC_ESDHC_CLK:
                return get_usdhc_clk(0);
        case MXC_ESDHC2_CLK:
                return get_usdhc_clk(1);
        case MXC_ESDHC3_CLK:
                return get_usdhc_clk(2);
        case MXC_ESDHC4_CLK:
                return get_usdhc_clk(3);
        case MXC_SATA_CLK:
                return get_ahb_clk();
        default:
                printf("Unsupported MXC CLK: %d\n", clk);
                break;
        }

        return 0;
}

#ifndef CONFIG_MX6SX
void enable_ipu_clock(void)
{
        struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;

        setbits_le32(&mxc_ccm->CCGR3, MXC_CCM_CCGR3_IPU1_IPU_MASK);

        if (is_mx6dqp()) {
                setbits_le32(&mxc_ccm->CCGR6, MXC_CCM_CCGR6_PRG_CLK0_MASK);
                setbits_le32(&mxc_ccm->CCGR3, MXC_CCM_CCGR3_IPU2_IPU_MASK);
        }
}

void disable_ipu_clock(void)
{
        struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;

        clrbits_le32(&mxc_ccm->CCGR3, MXC_CCM_CCGR3_IPU1_IPU_MASK);

        if (is_mx6dqp()) {
                clrbits_le32(&mxc_ccm->CCGR6, MXC_CCM_CCGR6_PRG_CLK0_MASK);
                clrbits_le32(&mxc_ccm->CCGR3, MXC_CCM_CCGR3_IPU2_IPU_MASK);
        }
}
#endif

#ifndef CONFIG_SPL_BUILD
/*
 * Dump some core clockes.
 */
int do_mx6_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
        u32 freq;
        freq = decode_pll(PLL_SYS, MXC_HCLK);
        printf("PLL_SYS    %8d MHz\n", freq / 1000000);
        freq = decode_pll(PLL_BUS, MXC_HCLK);
        printf("PLL_BUS    %8d MHz\n", freq / 1000000);
        freq = decode_pll(PLL_USBOTG, MXC_HCLK);
        printf("PLL_OTG    %8d MHz\n", freq / 1000000);
        freq = decode_pll(PLL_ENET, MXC_HCLK);
        printf("PLL_NET    %8d MHz\n", freq / 1000000);

        printf("\n");
        printf("ARM        %8d kHz\n", mxc_get_clock(MXC_ARM_CLK) / 1000);
        printf("IPG        %8d kHz\n", mxc_get_clock(MXC_IPG_CLK) / 1000);
        printf("UART       %8d kHz\n", mxc_get_clock(MXC_UART_CLK) / 1000);
#ifdef CONFIG_MXC_SPI
        printf("CSPI       %8d kHz\n", mxc_get_clock(MXC_CSPI_CLK) / 1000);
#endif
        printf("AHB        %8d kHz\n", mxc_get_clock(MXC_AHB_CLK) / 1000);
        printf("AXI        %8d kHz\n", mxc_get_clock(MXC_AXI_CLK) / 1000);
        printf("DDR        %8d kHz\n", mxc_get_clock(MXC_DDR_CLK) / 1000);
        printf("USDHC1     %8d kHz\n", mxc_get_clock(MXC_ESDHC_CLK) / 1000);
        printf("USDHC2     %8d kHz\n", mxc_get_clock(MXC_ESDHC2_CLK) / 1000);
        printf("USDHC3     %8d kHz\n", mxc_get_clock(MXC_ESDHC3_CLK) / 1000);
        printf("USDHC4     %8d kHz\n", mxc_get_clock(MXC_ESDHC4_CLK) / 1000);
        printf("EMI SLOW   %8d kHz\n", mxc_get_clock(MXC_EMI_SLOW_CLK) / 1000);
        printf("IPG PERCLK %8d kHz\n", mxc_get_clock(MXC_IPG_PERCLK) / 1000);

        return 0;
}

#if defined(CONFIG_MX6Q) || defined(CONFIG_MX6D) || defined(CONFIG_MX6DL) || \
        defined(CONFIG_MX6S)
static void disable_ldb_di_clock_sources(void)
{
        struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
        int reg;

        /* Make sure PFDs are disabled at boot. */
        reg = readl(&mxc_ccm->analog_pfd_528);
        /* Cannot disable pll2_pfd2_396M, as it is the MMDC clock in iMX6DL */
        if (is_mx6sdl())
                reg |= 0x80008080;
        else
                reg |= 0x80808080;
        writel(reg, &mxc_ccm->analog_pfd_528);

        /* Disable PLL3 PFDs */
        reg = readl(&mxc_ccm->analog_pfd_480);
        reg |= 0x80808080;
        writel(reg, &mxc_ccm->analog_pfd_480);

        /* Disable PLL5 */
        reg = readl(&mxc_ccm->analog_pll_video);
        reg &= ~(1 << 13);
        writel(reg, &mxc_ccm->analog_pll_video);
}

static void enable_ldb_di_clock_sources(void)
{
        struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
        int reg;

        reg = readl(&mxc_ccm->analog_pfd_528);
        if (is_mx6sdl())
                reg &= ~(0x80008080);
        else
                reg &= ~(0x80808080);
        writel(reg, &mxc_ccm->analog_pfd_528);

        reg = readl(&mxc_ccm->analog_pfd_480);
        reg &= ~(0x80808080);
        writel(reg, &mxc_ccm->analog_pfd_480);
}

/*
 * Try call this function as early in the boot process as possible since the
 * function temporarily disables PLL2 PFD's, PLL3 PFD's and PLL5.
 */
void select_ldb_di_clock_source(enum ldb_di_clock clk)
{
        struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
        int reg;

        /*
         * Need to follow a strict procedure when changing the LDB
         * clock, else we can introduce a glitch. Things to keep in
         * mind:
         * 1. The current and new parent clocks must be disabled.
         * 2. The default clock for ldb_dio_clk is mmdc_ch1 which has
         * no CG bit.
         * 3. In the RTL implementation of the LDB_DI_CLK_SEL mux
         * the top four options are in one mux and the PLL3 option along
         * with another option is in the second mux. There is third mux
         * used to decide between the first and second mux.
         * The code below switches the parent to the bottom mux first
         * and then manipulates the top mux. This ensures that no glitch
         * will enter the divider.
         *
         * Need to disable MMDC_CH1 clock manually as there is no CG bit
         * for this clock. The only way to disable this clock is to move
         * it to pll3_sw_clk and then to disable pll3_sw_clk
         * Make sure periph2_clk2_sel is set to pll3_sw_clk
         */

        /* Disable all ldb_di clock parents */
        disable_ldb_di_clock_sources();

        /* Set MMDC_CH1 mask bit */
        reg = readl(&mxc_ccm->ccdr);
        reg |= MXC_CCM_CCDR_MMDC_CH1_HS_MASK;
        writel(reg, &mxc_ccm->ccdr);

        /* Set periph2_clk2_sel to be sourced from PLL3_sw_clk */
        reg = readl(&mxc_ccm->cbcmr);
        reg &= ~MXC_CCM_CBCMR_PERIPH2_CLK2_SEL;
        writel(reg, &mxc_ccm->cbcmr);

        /*
         * Set the periph2_clk_sel to the top mux so that
         * mmdc_ch1 is from pll3_sw_clk.
         */
        reg = readl(&mxc_ccm->cbcdr);
        reg |= MXC_CCM_CBCDR_PERIPH2_CLK_SEL;
        writel(reg, &mxc_ccm->cbcdr);

        /* Wait for the clock switch */
        while (readl(&mxc_ccm->cdhipr))
                ;
        /* Disable pll3_sw_clk by selecting bypass clock source */
        reg = readl(&mxc_ccm->ccsr);
        reg |= MXC_CCM_CCSR_PLL3_SW_CLK_SEL;
        writel(reg, &mxc_ccm->ccsr);

        /* Set the ldb_di0_clk and ldb_di1_clk to 111b */
        reg = readl(&mxc_ccm->cs2cdr);
        reg |= ((7 << MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET)
              | (7 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET));
        writel(reg, &mxc_ccm->cs2cdr);

        /* Set the ldb_di0_clk and ldb_di1_clk to 100b */
        reg = readl(&mxc_ccm->cs2cdr);
        reg &= ~(MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK
              | MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK);
        reg |= ((4 << MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET)
              | (4 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET));
        writel(reg, &mxc_ccm->cs2cdr);

        /* Set the ldb_di0_clk and ldb_di1_clk to desired source */
        reg = readl(&mxc_ccm->cs2cdr);
        reg &= ~(MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK
              | MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK);
        reg |= ((clk << MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET)
              | (clk << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET));
        writel(reg, &mxc_ccm->cs2cdr);

        /* Unbypass pll3_sw_clk */
        reg = readl(&mxc_ccm->ccsr);
        reg &= ~MXC_CCM_CCSR_PLL3_SW_CLK_SEL;
        writel(reg, &mxc_ccm->ccsr);

        /*
         * Set the periph2_clk_sel back to the bottom mux so that
         * mmdc_ch1 is from its original parent.
         */
        reg = readl(&mxc_ccm->cbcdr);
        reg &= ~MXC_CCM_CBCDR_PERIPH2_CLK_SEL;
        writel(reg, &mxc_ccm->cbcdr);

        /* Wait for the clock switch */
        while (readl(&mxc_ccm->cdhipr))
                ;
        /* Clear MMDC_CH1 mask bit */
        reg = readl(&mxc_ccm->ccdr);
        reg &= ~MXC_CCM_CCDR_MMDC_CH1_HS_MASK;
        writel(reg, &mxc_ccm->ccdr);

        enable_ldb_di_clock_sources();
}
#endif

/***************************************************/

U_BOOT_CMD(
        clocks, CONFIG_SYS_MAXARGS, 1, do_mx6_showclocks,
        "display clocks",
        ""
);
#endif