1
2
3
4
5
6
7#ifndef __CONFIG_H
8#define __CONFIG_H
9
10#include "mx6_common.h"
11
12#define CONFIG_SPL_LIBCOMMON_SUPPORT
13#include "imx6_spl.h"
14
15#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
16#define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_FLASH_BASE + 0x80000)
17#define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000
18
19
20
21
22
23
24#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR (0x800)
25#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (0x80)
26#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR (0x1000)
27#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "fitImage"
28
29
30#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
31
32#define CONFIG_BOARD_LATE_INIT
33#define CONFIG_MXC_UART_BASE UART1_BASE
34
35#define CONFIG_SYS_MEMTEST_START 0x10000000
36#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
37
38
39#define CONFIG_SYS_FSL_USDHC_NUM 2
40#define CONFIG_SYS_FSL_ESDHC_ADDR 0
41
42
43#define CONFIG_SYS_FLASH_BASE WEIM_ARB_BASE_ADDR
44#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
45#define CONFIG_SYS_FLASH_EMPTY_INFO
46#define CONFIG_FLASH_VERIFY
47
48
49#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
50#define CONFIG_SYS_FLASH_BANKS_LIST { (CONFIG_SYS_FLASH_BASE) }
51#define CONFIG_SYS_FLASH_BANKS_SIZES { (32 * SZ_1M) }
52
53
54#define IMX_FEC_BASE ENET_BASE_ADDR
55#define CONFIG_FEC_MXC_PHYADDR 1
56
57#define CONFIG_EXTRA_ENV_SETTINGS \
58 "console=ttymxc0,115200 quiet\0" \
59 "fdt_high=0xffffffff\0" \
60 "initrd_high=0xffffffff\0" \
61 "boot_os=yes\0" \
62 "kernelsize=0x300000\0" \
63 "disable_giga=yes\0" \
64 "download_kernel=" \
65 "tftpboot ${loadaddr} ${kernel_file};\0" \
66 "get_boot_medium=" \
67 "setenv boot_medium nor;" \
68 "setexpr.l _src_sbmr1 *0x020d8004;" \
69 "setexpr _b_medium ${_src_sbmr1} '&' 0x00000040;" \
70 "if test ${_b_medium} = 40; then " \
71 "setenv boot_medium sdcard;" \
72 "fi\0" \
73 "kernel_file=fitImage\0" \
74 "boot_sd=" \
75 "echo '#######################';" \
76 "echo '# Factory SDcard Boot #';" \
77 "echo '#######################';" \
78 "setenv mmcdev 1;" \
79 "setenv mmcfactorydev 0;" \
80 "setenv mmcfactorypart 1;" \
81 "run factory_flash_img;\0" \
82 "boot_nor=" \
83 "setenv kernelnor 0x08180000;" \
84 "setenv bootargs console=${console} " \
85 CONFIG_MTDPARTS_DEFAULT " " \
86 "root=/dev/mmcblk1 rootfstype=ext4 rw rootwait noinitrd;" \
87 "cp.l ${kernelnor} ${loadaddr} ${kernelsize};" \
88 "bootm ${loadaddr};reset;\0" \
89 "boot_recovery=" \
90 "echo '#######################';" \
91 "echo '# RECOVERY SWU Boot #';" \
92 "echo '#######################';" \
93 "setenv rootfsloadaddr 0x13000000;" \
94 "setenv swukernelnor 0x08980000;" \
95 "setenv swurootfsnor 0x09180000;" \
96 "setenv bootargs console=${console} " \
97 CONFIG_MTDPARTS_DEFAULT " " \
98 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
99 ":${hostname}::off root=/dev/ram rw;" \
100 "cp.l ${swurootfsnor} ${rootfsloadaddr} 0x200000;" \
101 "cp.l ${swukernelnor} ${loadaddr} ${kernelsize};" \
102 "bootm ${loadaddr} ${rootfsloadaddr};reset;\0" \
103 "boot_tftp=" \
104 "echo '#######################';" \
105 "echo '# TFTP Boot #';" \
106 "echo '#######################';" \
107 "if run download_kernel; then " \
108 "setenv bootargs console=${console} " \
109 "root=/dev/mmcblk0p2 rootwait;" \
110 "bootm $loadaddr};reset;" \
111 "fi\0" \
112 "bootcmd=" \
113 "if test -n ${recovery_status}; then " \
114 "run boot_recovery;" \
115 "else " \
116 "if test ! -n ${boot_medium}; then " \
117 "run get_boot_medium;" \
118 "if test ${boot_medium} = sdcard; then " \
119 "run boot_sd;" \
120 "else " \
121 "run boot_nor;" \
122 "fi;" \
123 "else " \
124 "if test ${boot_medium} = tftp; then " \
125 "run boot_tftp;" \
126 "fi;" \
127 "fi;" \
128 "fi\0" \
129 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
130 "bootdev=1\0" \
131 "bootpart=1\0" \
132 "netdev=eth0\0" \
133 "load_addr=0x11000000\0" \
134 "uboot_file=u-boot.img\0" \
135 "SPL_file=SPL\0" \
136 "load_uboot=tftp ${load_addr} ${uboot_file}\0" \
137 "nor_img_addr=0x11000000\0" \
138 "nor_img_file=core-image-lwn-mccmon6.nor\0" \
139 "emmc_img_file=core-image-lwn-mccmon6.ext4\0" \
140 "nor_bank_start=" __stringify(CONFIG_SYS_FLASH_BASE) "\0" \
141 "nor_img_size=0x02000000\0" \
142 "factory_script_file=factory.scr\0" \
143 "factory_load_script=" \
144 "if test -e mmc ${mmcdev}:${mmcfactorypart} " \
145 "${factory_script_file}; then " \
146 "load mmc ${mmcdev}:${mmcfactorypart} " \
147 "${loadaddr} ${factory_script_file};" \
148 "fi\0" \
149 "factory_script=echo Running factory script from mmc${mmcdev} ...; " \
150 "source ${loadaddr}\0" \
151 "factory_flash_img="\
152 "echo 'Flash mccmon6 with factory images'; " \
153 "if run factory_load_script; then " \
154 "run factory_script;" \
155 "else " \
156 "echo No factory script: ${factory_script_file} found on " \
157 "device ${mmcdev};" \
158 "run factory_nor_img;" \
159 "run factory_eMMC_img;" \
160 "run factory_SPL_falcon_setup;" \
161 "fi\0" \
162 "factory_eMMC_img="\
163 "echo 'Update mccmon6 eMMC image'; " \
164 "if load mmc ${mmcdev}:${mmcfactorypart} " \
165 "${loadaddr} ${emmc_img_file}; then " \
166 "setexpr fw_sz ${filesize} / 0x200;" \
167 "setexpr fw_sz ${fw_sz} + 1;" \
168 "mmc dev ${mmcfactorydev};" \
169 "mmc write ${loadaddr} 0x0 ${fw_sz};" \
170 "fi\0" \
171 "factory_nor_img="\
172 "echo 'Update mccmon6 NOR image'; " \
173 "if load mmc ${mmcdev}:${mmcfactorypart} " \
174 "${nor_img_addr} ${nor_img_file}; then " \
175 "run nor_update;" \
176 "fi\0" \
177 "nor_update=" \
178 "protect off ${nor_bank_start} +${nor_img_size};" \
179 "erase ${nor_bank_start} +${nor_img_size};" \
180 "setexpr nor_img_size ${nor_img_size} / 4; " \
181 "cp.l ${nor_img_addr} ${nor_bank_start} ${nor_img_size}\0" \
182 "factory_SPL_falcon_setup="\
183 "echo 'Write Falcon boot data'; " \
184 "setenv kernelnor 0x08180000;" \
185 "cp.l ${kernelnor} ${loadaddr} ${kernelsize};" \
186 "spl export fdt ${loadaddr};" \
187 "setenv nor_img_addr ${fdtargsaddr};" \
188 "setenv nor_img_size 0x20000;" \
189 "setenv nor_bank_start " \
190 __stringify(CONFIG_CMD_SPL_NOR_OFS)";" \
191 "run nor_update\0" \
192 "tftp_nor_uboot="\
193 "echo 'Update mccmon6 NOR U-BOOT via TFTP'; " \
194 "setenv nor_img_file u-boot.img; " \
195 "setenv nor_img_size 0x80000; " \
196 "setenv nor_bank_start 0x08080000; " \
197 "if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
198 "run nor_update;" \
199 "fi\0" \
200 "tftp_nor_fitImg="\
201 "echo 'Update mccmon6 NOR fitImage via TFTP'; " \
202 "setenv nor_img_file fitImage; " \
203 "setenv nor_img_size 0x500000; " \
204 "setenv nor_bank_start 0x08180000; " \
205 "if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
206 "run nor_update;" \
207 "fi\0" \
208 "tftp_nor_img="\
209 "echo 'Update mccmon6 NOR image via TFTP'; " \
210 "if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
211 "run nor_update;" \
212 "fi\0" \
213 "tftp_nor_SPL="\
214 "if tftp ${load_addr} SPL_padded; then " \
215 "erase 0x08000000 +0x20000;" \
216 "cp.b ${load_addr} 0x08000000 0x20000;" \
217 "fi;\0" \
218 "tftp_sd_SPL="\
219 "if mmc dev 1; then " \
220 "if tftp ${load_addr} ${SPL_file}; then " \
221 "setexpr fw_sz ${filesize} / 0x200; " \
222 "setexpr fw_sz ${fw_sz} + 1; " \
223 "mmc write ${load_addr} 0x2 ${fw_sz};" \
224 "fi;" \
225 "fi;\0" \
226 "tftp_sd_uboot="\
227 "if mmc dev 1; then " \
228 "if run load_uboot; then " \
229 "setexpr fw_sz ${filesize} / 0x200; " \
230 "setexpr fw_sz ${fw_sz} + 1; " \
231 "mmc write ${load_addr} 0x8A ${fw_sz};" \
232 "fi;" \
233 "fi;\0"
234
235
236#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
237
238#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
239#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
240#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
241
242#define CONFIG_SYS_INIT_SP_OFFSET \
243 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
244#define CONFIG_SYS_INIT_SP_ADDR \
245 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
246
247
248
249
250
251#endif
252
