/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * This file implements recording of each stage of the boot process. It is
 * intended to implement timing of each stage, reporting this information
 * to the user and passing it to the OS for logging / further analysis.
 * Note that it requires timer_get_boot_us() to be defined by the board
 *
 * Copyright (c) 2011 The Chromium OS Authors.
 */

#ifndef _BOOTSTAGE_H
#define _BOOTSTAGE_H

/* Flags for each bootstage record */
enum bootstage_flags {
        BOOTSTAGEF_ERROR        = 1 << 0,       /* Error record */
        BOOTSTAGEF_ALLOC        = 1 << 1,       /* Allocate an id */
};

/* bootstate sub-IDs used for kernel and ramdisk ranges */
enum {
        BOOTSTAGE_SUB_FORMAT,
        BOOTSTAGE_SUB_FORMAT_OK,
        BOOTSTAGE_SUB_NO_UNIT_NAME,
        BOOTSTAGE_SUB_UNIT_NAME,
        BOOTSTAGE_SUB_SUBNODE,

        BOOTSTAGE_SUB_CHECK,
        BOOTSTAGE_SUB_HASH = 5,
        BOOTSTAGE_SUB_CHECK_ARCH = 5,
        BOOTSTAGE_SUB_CHECK_ALL,
        BOOTSTAGE_SUB_GET_DATA,
        BOOTSTAGE_SUB_CHECK_ALL_OK = 7,
        BOOTSTAGE_SUB_GET_DATA_OK,
        BOOTSTAGE_SUB_LOAD,
};

/*
 * A list of boot stages that we know about. Each of these indicates the
 * state that we are at, and the action that we are about to perform. For
 * errors, we issue an error for an item when it fails. Therefore the
 * normal sequence is:
 *
 * progress action1
 * progress action2
 * progress action3
 *
 * and an error condition where action 3 failed would be:
 *
 * progress action1
 * progress action2
 * progress action3
 * error on action3
 */
enum bootstage_id {
        BOOTSTAGE_ID_START = 0,
        BOOTSTAGE_ID_CHECK_MAGIC,       /* Checking image magic */
        BOOTSTAGE_ID_CHECK_HEADER,      /* Checking image header */
        BOOTSTAGE_ID_CHECK_CHECKSUM,    /* Checking image checksum */
        BOOTSTAGE_ID_CHECK_ARCH,        /* Checking architecture */

        BOOTSTAGE_ID_CHECK_IMAGETYPE = 5,/* Checking image type */
        BOOTSTAGE_ID_DECOMP_IMAGE,      /* Decompressing image */
        BOOTSTAGE_ID_KERNEL_LOADED,     /* Kernel has been loaded */
        BOOTSTAGE_ID_DECOMP_UNIMPL = 7, /* Odd decompression algorithm */
        BOOTSTAGE_ID_CHECK_BOOT_OS,     /* Calling OS-specific boot function */
        BOOTSTAGE_ID_BOOT_OS_RETURNED,  /* Tried to boot OS, but it returned */
        BOOTSTAGE_ID_CHECK_RAMDISK = 9, /* Checking ram disk */

        BOOTSTAGE_ID_RD_MAGIC,          /* Checking ram disk magic */
        BOOTSTAGE_ID_RD_HDR_CHECKSUM,   /* Checking ram disk heder checksum */
        BOOTSTAGE_ID_RD_CHECKSUM,       /* Checking ram disk checksum */
        BOOTSTAGE_ID_COPY_RAMDISK = 12, /* Copying ram disk into place */
        BOOTSTAGE_ID_RAMDISK,           /* Checking for valid ramdisk */
        BOOTSTAGE_ID_NO_RAMDISK,        /* No ram disk found (not an error) */

        BOOTSTAGE_ID_RUN_OS     = 15,   /* Exiting U-Boot, entering OS */

        BOOTSTAGE_ID_NEED_RESET = 30,
        BOOTSTAGE_ID_POST_FAIL,         /* Post failure */
        BOOTSTAGE_ID_POST_FAIL_R,       /* Post failure reported after reloc */

        /*
         * This set is reported only by x86, and the meaning is different. In
         * this case we are reporting completion of a particular stage.
         * This should probably change in the x86 code (which doesn't report
         * errors in any case), but discussion this can perhaps wait until we
         * have a generic board implementation.
         */
        BOOTSTAGE_ID_BOARD_INIT_R,      /* We have relocated */
        BOOTSTAGE_ID_BOARD_GLOBAL_DATA, /* Global data is set up */

        BOOTSTAGE_ID_BOARD_INIT_SEQ,    /* We completed the init sequence */
        BOOTSTAGE_ID_BOARD_FLASH,       /* We have configured flash banks */
        BOOTSTAGE_ID_BOARD_FLASH_37,    /* In case you didn't hear... */
        BOOTSTAGE_ID_BOARD_ENV,         /* Environment is relocated & ready */
        BOOTSTAGE_ID_BOARD_PCI,         /* PCI is up */

        BOOTSTAGE_ID_BOARD_INTERRUPTS,  /* Exceptions / interrupts ready */
        BOOTSTAGE_ID_BOARD_DONE,        /* Board init done, off to main loop */
        /* ^^^ here ends the x86 sequence */

        /* Boot stages related to loading a kernel from an IDE device */
        BOOTSTAGE_ID_IDE_START = 41,
        BOOTSTAGE_ID_IDE_ADDR,
        BOOTSTAGE_ID_IDE_BOOT_DEVICE,
        BOOTSTAGE_ID_IDE_TYPE,

        BOOTSTAGE_ID_IDE_PART,
        BOOTSTAGE_ID_IDE_PART_INFO,
        BOOTSTAGE_ID_IDE_PART_TYPE,
        BOOTSTAGE_ID_IDE_PART_READ,
        BOOTSTAGE_ID_IDE_FORMAT,

        BOOTSTAGE_ID_IDE_CHECKSUM,      /* 50 */
        BOOTSTAGE_ID_IDE_READ,

        /* Boot stages related to loading a kernel from an NAND device */
        BOOTSTAGE_ID_NAND_PART,
        BOOTSTAGE_ID_NAND_SUFFIX,
        BOOTSTAGE_ID_NAND_BOOT_DEVICE,
        BOOTSTAGE_ID_NAND_HDR_READ = 55,
        BOOTSTAGE_ID_NAND_AVAILABLE = 55,
        BOOTSTAGE_ID_NAND_TYPE = 57,
        BOOTSTAGE_ID_NAND_READ,

        /* Boot stages related to loading a kernel from an network device */
        BOOTSTAGE_ID_NET_CHECKSUM = 60,
        BOOTSTAGE_ID_NET_ETH_START = 64,
        BOOTSTAGE_ID_NET_ETH_INIT,

        BOOTSTAGE_ID_NET_START = 80,
        BOOTSTAGE_ID_NET_NETLOOP_OK,
        BOOTSTAGE_ID_NET_LOADED,
        BOOTSTAGE_ID_NET_DONE_ERR,
        BOOTSTAGE_ID_NET_DONE,

        BOOTSTAGE_ID_FIT_FDT_START = 90,
        /*
         * Boot stages related to loading a FIT image. Some of these are a
         * bit wonky.
         */
        BOOTSTAGE_ID_FIT_KERNEL_START = 100,

        BOOTSTAGE_ID_FIT_CONFIG = 110,
        BOOTSTAGE_ID_FIT_TYPE,
        BOOTSTAGE_ID_FIT_KERNEL_INFO,

        BOOTSTAGE_ID_FIT_COMPRESSION,
        BOOTSTAGE_ID_FIT_OS,
        BOOTSTAGE_ID_FIT_LOADADDR,
        BOOTSTAGE_ID_OVERWRITTEN,

        /* Next 10 IDs used by BOOTSTAGE_SUB_... */
        BOOTSTAGE_ID_FIT_RD_START = 120,        /* Ramdisk stages */

        /* Next 10 IDs used by BOOTSTAGE_SUB_... */
        BOOTSTAGE_ID_FIT_SETUP_START = 130,     /* x86 setup stages */

        BOOTSTAGE_ID_IDE_FIT_READ = 140,
        BOOTSTAGE_ID_IDE_FIT_READ_OK,

        BOOTSTAGE_ID_NAND_FIT_READ = 150,
        BOOTSTAGE_ID_NAND_FIT_READ_OK,

        BOOTSTAGE_ID_FIT_LOADABLE_START = 160,  /* for Loadable Images */
        /*
         * These boot stages are new, higher level, and not directly related
         * to the old boot progress numbers. They are useful for recording
         * rough boot timing information.
         */
        BOOTSTAGE_ID_AWAKE,
        BOOTSTAGE_ID_START_TPL,
        BOOTSTAGE_ID_END_TPL,
        BOOTSTAGE_ID_START_SPL,
        BOOTSTAGE_ID_END_SPL,
        BOOTSTAGE_ID_START_UBOOT_F,
        BOOTSTAGE_ID_START_UBOOT_R,
        BOOTSTAGE_ID_USB_START,
        BOOTSTAGE_ID_ETH_START,
        BOOTSTAGE_ID_BOOTP_START,
        BOOTSTAGE_ID_BOOTP_STOP,
        BOOTSTAGE_ID_BOOTM_START,
        BOOTSTAGE_ID_BOOTM_HANDOFF,
        BOOTSTAGE_ID_MAIN_LOOP,
        BOOTSTAGE_ID_ENTER_CLI_LOOP,
        BOOTSTAGE_KERNELREAD_START,
        BOOTSTAGE_KERNELREAD_STOP,
        BOOTSTAGE_ID_BOARD_INIT,
        BOOTSTAGE_ID_BOARD_INIT_DONE,

        BOOTSTAGE_ID_CPU_AWAKE,
        BOOTSTAGE_ID_MAIN_CPU_AWAKE,
        BOOTSTAGE_ID_MAIN_CPU_READY,

        BOOTSTAGE_ID_ACCUM_LCD,
        BOOTSTAGE_ID_ACCUM_SCSI,
        BOOTSTAGE_ID_ACCUM_SPI,
        BOOTSTAGE_ID_ACCUM_DECOMP,
        BOOTSTAGE_ID_ACCUM_OF_LIVE,
        BOOTSTAGE_ID_FPGA_INIT,
        BOOTSTAGE_ID_ACCUM_DM_SPL,
        BOOTSTAGE_ID_ACCUM_DM_F,
        BOOTSTAGE_ID_ACCUM_DM_R,
        BOOTSTAGE_ID_ACCUM_FSP_M,
        BOOTSTAGE_ID_ACCUM_FSP_S,
        BOOTSTAGE_ID_ACCUM_MMAP_SPI,

        /* a few spare for the user, from here */
        BOOTSTAGE_ID_USER,
        BOOTSTAGE_ID_ALLOC,
};

/*
 * Return the time since boot in microseconds, This is needed for bootstage
 * and should be defined in CPU- or board-specific code. If undefined then
 * you will get a link error.
 */
ulong timer_get_boot_us(void);

#if defined(USE_HOSTCC)
#define show_boot_progress(val) do {} while (0)
#else
/**
 * Board code can implement show_boot_progress() if needed.
 *
 * @param val   Progress state (enum bootstage_id), or -id if an error
 *              has occurred.
 */
void show_boot_progress(int val);
#endif

#if !defined(USE_HOSTCC)
#if CONFIG_IS_ENABLED(BOOTSTAGE)
#define ENABLE_BOOTSTAGE
#endif
#endif

#ifdef ENABLE_BOOTSTAGE

/* This is the full bootstage implementation */

/**
 * Relocate existing bootstage records
 *
 * Call this after relocation has happened and after malloc has been initted.
 * We need to copy any pointers in bootstage records that were added pre-
 * relocation, since memory can be overwritten later.
 * @return Always returns 0, to indicate success
 */
int bootstage_relocate(void);

/**
 * Add a new bootstage record
 *
 * @param id    Bootstage ID to use (ignored if flags & BOOTSTAGEF_ALLOC)
 * @param name  Name of record, or NULL for none
 * @param flags Flags (BOOTSTAGEF_...)
 * @param mark  Time to record in this record, in microseconds
 */
ulong bootstage_add_record(enum bootstage_id id, const char *name,
                           int flags, ulong mark);

/**
 * Mark a time stamp for the current boot stage.
 */
ulong bootstage_mark(enum bootstage_id id);

ulong bootstage_error(enum bootstage_id id);

ulong bootstage_mark_name(enum bootstage_id id, const char *name);

/**
 * Mark a time stamp in the given function and line number
 *
 * See BOOTSTAGE_MARKER() for a convenient macro.
 *
 * @param file          Filename to record (NULL if none)
 * @param func          Function name to record
 * @param linenum       Line number to record
 * @return recorded time stamp
 */
ulong bootstage_mark_code(const char *file, const char *func,
                          int linenum);

/**
 * Mark the start of a bootstage activity. The end will be marked later with
 * bootstage_accum() and at that point we accumulate the time taken. Calling
 * this function turns the given id into a accumulator rather than and
 * absolute mark in time. Accumulators record the total amount of time spent
 * in an activty during boot.
 *
 * @param id    Bootstage id to record this timestamp against
 * @param name  Textual name to display for this id in the report (maybe NULL)
 * @return start timestamp in microseconds
 */
uint32_t bootstage_start(enum bootstage_id id, const char *name);

/**
 * Mark the end of a bootstage activity
 *
 * After previously marking the start of an activity with bootstage_start(),
 * call this function to mark the end. You can call these functions in pairs
 * as many times as you like.
 *
 * @param id    Bootstage id to record this timestamp against
 * @return time spent in this iteration of the activity (i.e. the time now
 *              less the start time recorded in the last bootstage_start() call
 *              with this id.
 */
uint32_t bootstage_accum(enum bootstage_id id);

/* Print a report about boot time */
void bootstage_report(void);

/**
 * Add bootstage information to the device tree
 *
 * @return 0 if ok, -ve on error
 */
int bootstage_fdt_add_report(void);

/**
 * Stash bootstage data into memory
 *
 * @param base  Base address of memory buffer
 * @param size  Size of memory buffer
 * @return 0 if stashed ok, -1 if out of space
 */
int bootstage_stash(void *base, int size);

/**
 * Read bootstage data from memory
 *
 * Bootstage data is read from memory and placed in the bootstage table
 * in the user records.
 *
 * @param base  Base address of memory buffer
 * @param size  Size of memory buffer (-1 if unknown)
 * @return 0 if unstashed ok, -ENOENT if bootstage info not found, -ENOSPC if
 *      there is not space for read the stashed data, or other error if
 *      something else went wrong
 */
int bootstage_unstash(const void *base, int size);

/**
 * bootstage_get_size() - Get the size of the bootstage data
 *
 * @return size of boostage data in bytes
 */
int bootstage_get_size(void);

/**
 * bootstage_init() - Prepare bootstage for use
 *
 * @first: true if this is the first time bootstage is set up. This causes it
 *      to add a 'reset' record with a time of 0.
 */
int bootstage_init(bool first);

#else
static inline ulong bootstage_add_record(enum bootstage_id id,
                const char *name, int flags, ulong mark)
{
        return 0;
}

/*
 * This is a dummy implementation which just calls show_boot_progress(),
 * and won't even do that unless CONFIG_SHOW_BOOT_PROGRESS is defined
 */

static inline int bootstage_relocate(void)
{
        return 0;
}

static inline ulong bootstage_mark(enum bootstage_id id)
{
        show_boot_progress(id);
        return 0;
}

static inline ulong bootstage_error(enum bootstage_id id)
{
        show_boot_progress(-id);
        return 0;
}

static inline ulong bootstage_mark_name(enum bootstage_id id, const char *name)
{
        show_boot_progress(id);
        return 0;
}

static inline ulong bootstage_mark_code(const char *file, const char *func,
                                        int linenum)
{
        return 0;
}

static inline uint32_t bootstage_start(enum bootstage_id id, const char *name)
{
        return 0;
}

static inline uint32_t bootstage_accum(enum bootstage_id id)
{
        return 0;
}

static inline int bootstage_stash(void *base, int size)
{
        return 0;       /* Pretend to succeed */
}

static inline int bootstage_unstash(const void *base, int size)
{
        return 0;       /* Pretend to succeed */
}

static inline int bootstage_get_size(void)
{
        return 0;
}

static inline int bootstage_init(bool first)
{
        return 0;
}

#endif /* ENABLE_BOOTSTAGE */

/* Helper macro for adding a bootstage to a line of code */
#define BOOTSTAGE_MARKER()      \
                bootstage_mark_code(__FILE__, __func__, __LINE__)

#endif