1#### 2# kbuild: Generic definitions 3 4# Convenient variables 5comma := , 6quote := " 7squote := ' 8empty := 9space := $(empty) $(empty) 10space_escape := _-_SPACE_-_ 11pound := \# 12 13### 14# Name of target with a '.' as filename prefix. foo/bar.o => foo/.bar.o 15dot-target = $(dir $@).$(notdir $@) 16 17### 18# The temporary file to save gcc -MD generated dependencies must not 19# contain a comma 20depfile = $(subst $(comma),_,$(dot-target).d) 21 22### 23# filename of target with directory and extension stripped 24basetarget = $(basename $(notdir $@)) 25 26### 27# filename of first prerequisite with directory and extension stripped 28baseprereq = $(basename $(notdir $<)) 29 30### 31# Escape single quote for use in echo statements 32escsq = $(subst $(squote),'\$(squote)',$1) 33 34### 35# Easy method for doing a status message 36 kecho := : 37 quiet_kecho := echo 38silent_kecho := : 39kecho := $($(quiet)kecho) 40 41### 42# filechk is used to check if the content of a generated file is updated. 43# Sample usage: 44# define filechk_sample 45# echo $KERNELRELEASE 46# endef 47# version.h : Makefile 48# $(call filechk,sample) 49# The rule defined shall write to stdout the content of the new file. 50# The existing file will be compared with the new one. 51# - If no file exist it is created 52# - If the content differ the new file is used 53# - If they are equal no change, and no timestamp update 54# - stdin is piped in from the first prerequisite ($<) so one has 55# to specify a valid file as first prerequisite (often the kbuild file) 56define filechk 57 $(Q)set -e; \ 58 mkdir -p $(dir $@); \ 59 $(filechk_$(1)) < $< > $@.tmp; \ 60 if [ -r $@ ] && cmp -s $@ $@.tmp; then \ 61 rm -f $@.tmp; \ 62 else \ 63 $(kecho) ' UPD $@'; \ 64 mv -f $@.tmp $@; \ 65 fi 66endef 67 68###### 69# gcc support functions 70# See documentation in Documentation/kbuild/makefiles.txt 71 72# cc-cross-prefix 73# Usage: CROSS_COMPILE := $(call cc-cross-prefix, m68k-linux-gnu- m68k-linux-) 74# Return first prefix where a prefix$(CC) is found in PATH. 75# If no $(CC) found in PATH with listed prefixes return nothing 76cc-cross-prefix = \ 77 $(word 1, $(foreach c,$(1), \ 78 $(shell set -e; \ 79 if (which $(strip $(c))$(CC)) > /dev/null 2>&1 ; then \ 80 echo $(c); \ 81 fi))) 82 83# output directory for tests below 84TMPOUT := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/) 85 86# try-run 87# Usage: option = $(call try-run, $(CC)...-o "$$TMP",option-ok,otherwise) 88# Exit code chooses option. "$$TMP" is can be used as temporary file and 89# is automatically cleaned up. 90# modifed for U-Boot: prevent cc-option from leaving .*.su files 91try-run = $(shell set -e; \ 92 TMP="$(TMPOUT).$$$$.tmp"; \ 93 TMPO="$(TMPOUT).$$$$.o"; \ 94 TMPSU="$(TMPOUT).$$$$.su"; \ 95 if ($(1)) >/dev/null 2>&1; \ 96 then echo "$(2)"; \ 97 else echo "$(3)"; \ 98 fi; \ 99 rm -f "$$TMP" "$$TMPO" "$$TMPSU") 100 101# as-option 102# Usage: cflags-y += $(call as-option,-Wa$(comma)-isa=foo,) 103 104as-option = $(call try-run,\ 105 $(CC) $(KBUILD_CFLAGS) $(1) -c -x assembler /dev/null -o "$$TMP",$(1),$(2)) 106 107# as-instr 108# Usage: cflags-y += $(call as-instr,instr,option1,option2) 109 110as-instr = $(call try-run,\ 111 printf "%b\n" "$(1)" | $(CC) $(KBUILD_AFLAGS) -c -x assembler -o "$$TMP" -,$(2),$(3)) 112 113# __cc-option 114# Usage: MY_CFLAGS += $(call __cc-option,$(CC),$(MY_CFLAGS),-march=winchip-c6,-march=i586) 115__cc-option = $(call try-run,\ 116 $(1) -Werror $(2) $(3) -c -x c /dev/null -o "$$TMP",$(3),$(4)) 117 118# cc-option 119# Usage: cflags-y += $(call cc-option,-march=winchip-c6,-march=i586) 120cc-option = $(call __cc-option, $(CC),\ 121 $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS),$(1),$(2)) 122 123# hostcc-option 124# Usage: cflags-y += $(call hostcc-option,-march=winchip-c6,-march=i586) 125hostcc-option = $(call __cc-option, $(HOSTCC),\ 126 $(HOSTCFLAGS) $(HOST_EXTRACFLAGS),$(1),$(2)) 127 128# cc-option-yn 129# Usage: flag := $(call cc-option-yn,-march=winchip-c6) 130cc-option-yn = $(call try-run,\ 131 $(CC) -Werror $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(1) -c -x c /dev/null -o "$$TMP",y,n) 132 133# cc-disable-warning 134# Usage: cflags-y += $(call cc-disable-warning,unused-but-set-variable) 135cc-disable-warning = $(call try-run,\ 136 $(CC) -Werror $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) -W$(strip $(1)) -c -x c /dev/null -o "$$TMP",-Wno-$(strip $(1))) 137 138# cc-name 139# Expands to either gcc or clang 140cc-name = $(shell $(CC) -v 2>&1 | grep -q "clang version" && echo clang || echo gcc) 141 142# cc-version 143cc-version = $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-version.sh $(CC)) 144 145# cc-fullversion 146cc-fullversion = $(shell $(CONFIG_SHELL) \ 147 $(srctree)/scripts/gcc-version.sh -p $(CC)) 148 149# cc-ifversion 150# Usage: EXTRA_CFLAGS += $(call cc-ifversion, -lt, 0402, -O1) 151cc-ifversion = $(shell [ $(cc-version) $(1) $(2) ] && echo $(3) || echo $(4)) 152 153# added for U-Boot 154binutils-version = $(shell $(CONFIG_SHELL) $(srctree)/scripts/binutils-version.sh $(AS)) 155 156# cc-ldoption 157# Usage: ldflags += $(call cc-ldoption, -Wl$(comma)--hash-style=both) 158cc-ldoption = $(call try-run,\ 159 $(CC) $(1) $(KBUILD_CPPFLAGS) $(CC_OPTION_CFLAGS) -nostdlib -x c /dev/null -o "$$TMP",$(1),$(2)) 160 161# ld-option 162# Usage: KBUILD_LDFLAGS += $(call ld-option, -X, -Y) 163ld-option = $(call try-run, $(LD) $(KBUILD_LDFLAGS) $(1) -v,$(1),$(2),$(3)) 164 165# ar-option 166# Usage: KBUILD_ARFLAGS := $(call ar-option,D) 167# Important: no spaces around options 168ar-option = $(call try-run, $(AR) rc$(1) "$$TMP",$(1),$(2)) 169 170# ld-version 171# Note this is mainly for HJ Lu's 3 number binutil versions 172ld-version = $(shell $(LD) --version | $(srctree)/scripts/ld-version.sh) 173 174# ld-ifversion 175# Usage: $(call ld-ifversion, -ge, 22252, y) 176ld-ifversion = $(shell [ $(ld-version) $(1) $(2) ] && echo $(3) || echo $(4)) 177 178###### 179 180### 181# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj= 182# Usage: 183# $(Q)$(MAKE) $(build)=dir 184build := -f $(srctree)/scripts/Makefile.build obj 185 186### 187# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.modbuiltin obj= 188# Usage: 189# $(Q)$(MAKE) $(modbuiltin)=dir 190modbuiltin := -f $(srctree)/scripts/Makefile.modbuiltin obj 191 192### 193# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.dtbinst obj= 194# Usage: 195# $(Q)$(MAKE) $(dtbinst)=dir 196dtbinst := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.dtbinst obj 197 198### 199# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj= 200# Usage: 201# $(Q)$(MAKE) $(clean)=dir 202clean := -f $(srctree)/scripts/Makefile.clean obj 203 204### 205# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.headersinst obj= 206# Usage: 207# $(Q)$(MAKE) $(hdr-inst)=dir 208hdr-inst := -f $(srctree)/scripts/Makefile.headersinst obj 209 210# Prefix -I with $(srctree) if it is not an absolute path. 211# skip if -I has no parameter 212addtree = $(if $(patsubst -I%,%,$(1)), \ 213$(if $(filter-out -I/% -I./% -I../%,$(1)),$(patsubst -I%,-I$(srctree)/%,$(1)),$(1)),$(1)) 214 215# Find all -I options and call addtree 216flags = $(foreach o,$($(1)),$(if $(filter -I%,$(o)),$(call addtree,$(o)),$(o))) 217 218# echo command. 219# Short version is used, if $(quiet) equals `quiet_', otherwise full one. 220echo-cmd = $(if $($(quiet)cmd_$(1)),\ 221 echo ' $(call escsq,$($(quiet)cmd_$(1)))$(echo-why)';) 222 223# printing commands 224cmd = @$(echo-cmd) $(cmd_$(1)) 225 226# Add $(obj)/ for paths that are not absolute 227objectify = $(foreach o,$(1),$(if $(filter /%,$(o)),$(o),$(obj)/$(o))) 228 229### 230# if_changed - execute command if any prerequisite is newer than 231# target, or command line has changed 232# if_changed_dep - as if_changed, but uses fixdep to reveal dependencies 233# including used config symbols 234# if_changed_rule - as if_changed but execute rule instead 235# See Documentation/kbuild/makefiles.txt for more info 236 237ifneq ($(KBUILD_NOCMDDEP),1) 238# Check if both arguments are the same including their order. Result is empty 239# string if equal. User may override this check using make KBUILD_NOCMDDEP=1 240arg-check = $(filter-out $(subst $(space),$(space_escape),$(strip $(cmd_$@))), \ 241 $(subst $(space),$(space_escape),$(strip $(cmd_$1)))) 242else 243arg-check = $(if $(strip $(cmd_$@)),,1) 244endif 245 246# Replace >$< with >$$< to preserve $ when reloading the .cmd file 247# (needed for make) 248# Replace >#< with >$(pound)< to avoid starting a comment in the .cmd file 249# (needed for make) 250# Replace >'< with >'\''< to be able to enclose the whole string in '...' 251# (needed for the shell) 252make-cmd = $(call escsq,$(subst $(pound),$$(pound),$(subst $$,$$$$,$(cmd_$(1))))) 253 254# Find any prerequisites that is newer than target or that does not exist. 255# PHONY targets skipped in both cases. 256any-prereq = $(filter-out $(PHONY),$?) $(filter-out $(PHONY) $(wildcard $^),$^) 257 258# Execute command if command has changed or prerequisite(s) are updated. 259# 260if_changed = $(if $(strip $(any-prereq) $(arg-check)), \ 261 @set -e; \ 262 $(echo-cmd) $(cmd_$(1)); \ 263 printf '%s\n' 'cmd_$@ := $(make-cmd)' > $(dot-target).cmd, @:) 264 265# Execute the command and also postprocess generated .d dependencies file. 266if_changed_dep = $(if $(strip $(any-prereq) $(arg-check) ), \ 267 @set -e; \ 268 $(echo-cmd) $(cmd_$(1)); \ 269 scripts/basic/fixdep $(depfile) $@ '$(make-cmd)' > $(dot-target).tmp;\ 270 rm -f $(depfile); \ 271 mv -f $(dot-target).tmp $(dot-target).cmd, @:) 272 273# Usage: $(call if_changed_rule,foo) 274# Will check if $(cmd_foo) or any of the prerequisites changed, 275# and if so will execute $(rule_foo). 276if_changed_rule = $(if $(strip $(any-prereq) $(arg-check) ), \ 277 @set -e; \ 278 $(rule_$(1)), @:) 279 280### 281# why - tell why a a target got build 282# enabled by make V=2 283# Output (listed in the order they are checked): 284# (1) - due to target is PHONY 285# (2) - due to target missing 286# (3) - due to: file1.h file2.h 287# (4) - due to command line change 288# (5) - due to missing .cmd file 289# (6) - due to target not in $(targets) 290# (1) PHONY targets are always build 291# (2) No target, so we better build it 292# (3) Prerequisite is newer than target 293# (4) The command line stored in the file named dir/.target.cmd 294# differed from actual command line. This happens when compiler 295# options changes 296# (5) No dir/.target.cmd file (used to store command line) 297# (6) No dir/.target.cmd file and target not listed in $(targets) 298# This is a good hint that there is a bug in the kbuild file 299ifeq ($(KBUILD_VERBOSE),2) 300why = \ 301 $(if $(filter $@, $(PHONY)),- due to target is PHONY, \ 302 $(if $(wildcard $@), \ 303 $(if $(strip $(any-prereq)),- due to: $(any-prereq), \ 304 $(if $(arg-check), \ 305 $(if $(cmd_$@),- due to command line change, \ 306 $(if $(filter $@, $(targets)), \ 307 - due to missing .cmd file, \ 308 - due to $(notdir $@) not in $$(targets) \ 309 ) \ 310 ) \ 311 ) \ 312 ), \ 313 - due to target missing \ 314 ) \ 315 ) 316 317echo-why = $(call escsq, $(strip $(why))) 318endif 319 320# delete partially updated (i.e. corrupted) files on error 321.DELETE_ON_ERROR: 322 323# do not delete intermediate files automatically 324.SECONDARY: 325 326ifdef CONFIG_SPL_BUILD 327SPL_ := SPL_ 328ifeq ($(CONFIG_TPL_BUILD),y) 329SPL_TPL_ := TPL_ 330else 331SPL_TPL_ := SPL_ 332endif 333else 334SPL_ := 335SPL_TPL_ := 336endif 337