uboot/arch/arm/include/asm/ehci-omap.h
<<
>>
Prefs
   1/* SPDX-License-Identifier: GPL-2.0 */
   2/*
   3 * OMAP EHCI port support
   4 * Based on LINUX KERNEL
   5 * drivers/usb/host/ehci-omap.c and drivers/mfd/omap-usb-host.c
   6 *
   7 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com*
   8 * Author: Govindraj R <govindraj.raja@ti.com>
   9 */
  10
  11#ifndef _OMAP_COMMON_EHCI_H_
  12#define _OMAP_COMMON_EHCI_H_
  13
  14enum usbhs_omap_port_mode {
  15        OMAP_USBHS_PORT_MODE_UNUSED,
  16        OMAP_EHCI_PORT_MODE_PHY,
  17        OMAP_EHCI_PORT_MODE_TLL,
  18        OMAP_EHCI_PORT_MODE_HSIC,
  19};
  20
  21#define OMAP_HS_USB_PORTS       3
  22
  23#define is_ehci_phy_mode(x)     ((x) == OMAP_EHCI_PORT_MODE_PHY)
  24#define is_ehci_tll_mode(x)     ((x) == OMAP_EHCI_PORT_MODE_TLL)
  25#define is_ehci_hsic_mode(x)    ((x) == OMAP_EHCI_PORT_MODE_HSIC)
  26
  27/* Values of UHH_REVISION - Note: these are not given in the TRM */
  28#define OMAP_USBHS_REV1                                 0x00000010 /* OMAP3 */
  29#define OMAP_USBHS_REV2                                 0x50700100 /* OMAP4 */
  30#define OMAP_USBHS_REV2_1                               0x50700101 /* OMAP5 */
  31
  32/* UHH Register Set */
  33#define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN              (1 << 2)
  34#define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN              (1 << 3)
  35#define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN             (1 << 4)
  36#define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN              (1 << 5)
  37
  38#define OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS              1
  39#define OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS              (1 << 11)
  40#define OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS              (1 << 12)
  41#define OMAP4_UHH_HOSTCONFIG_APP_START_CLK              (1 << 31)
  42
  43#define OMAP_P1_MODE_CLEAR                              (3 << 16)
  44#define OMAP_P1_MODE_TLL                                (1 << 16)
  45#define OMAP_P1_MODE_HSIC                               (3 << 16)
  46#define OMAP_P2_MODE_CLEAR                              (3 << 18)
  47#define OMAP_P2_MODE_TLL                                (1 << 18)
  48#define OMAP_P2_MODE_HSIC                               (3 << 18)
  49#define OMAP_P3_MODE_CLEAR                              (3 << 20)
  50#define OMAP_P3_MODE_HSIC                               (3 << 20)
  51
  52/* EHCI Register Set */
  53#define EHCI_INSNREG04_DISABLE_UNSUSPEND                (1 << 5)
  54#define EHCI_INSNREG05_ULPI_CONTROL_SHIFT               31
  55#define EHCI_INSNREG05_ULPI_PORTSEL_SHIFT               24
  56#define EHCI_INSNREG05_ULPI_OPSEL_SHIFT                 22
  57#define EHCI_INSNREG05_ULPI_REGADD_SHIFT                16
  58
  59#define OMAP_REV1_TLL_CHANNEL_COUNT                     3
  60#define OMAP_REV2_TLL_CHANNEL_COUNT                     2
  61
  62/* TLL Register Set */
  63#define OMAP_TLL_CHANNEL_CONF(num)                      (0x004 * num)
  64#define OMAP_TLL_CHANNEL_CONF_DRVVBUS                   (1 << 16)
  65#define OMAP_TLL_CHANNEL_CONF_CHRGVBUS                  (1 << 15)
  66#define OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF            (1 << 11)
  67#define OMAP_TLL_CHANNEL_CONF_CHANMODE_TRANSPARENT_UTMI (2 << 1)
  68#define OMAP_TLL_CHANNEL_CONF_CHANEN                    1
  69
  70struct omap_usbhs_board_data {
  71        enum usbhs_omap_port_mode port_mode[OMAP_HS_USB_PORTS];
  72};
  73
  74struct omap_usbtll {
  75        u32 rev;                /* 0x00 */
  76        u32 hwinfo;             /* 0x04 */
  77        u8 reserved1[0x8];
  78        u32 sysc;               /* 0x10 */
  79        u32 syss;               /* 0x14 */
  80        u32 irqst;              /* 0x18 */
  81        u32 irqen;              /* 0x1c */
  82        u8 reserved2[0x10];
  83        u32 shared_conf;        /* 0x30 */
  84        u8 reserved3[0xc];
  85        u32 channel_conf;       /* 0x40 */
  86};
  87
  88struct omap_uhh {
  89        u32 rev;        /* 0x00 */
  90        u32 hwinfo;     /* 0x04 */
  91        u8 reserved1[0x8];
  92        u32 sysc;       /* 0x10 */
  93        u32 syss;       /* 0x14 */
  94        u8 reserved2[0x28];
  95        u32 hostconfig; /* 0x40 */
  96        u32 debugcsr;   /* 0x44 */
  97};
  98
  99struct omap_ehci {
 100        u32 hccapbase;          /* 0x00 */
 101        u32 hcsparams;          /* 0x04 */
 102        u32 hccparams;          /* 0x08 */
 103        u8 reserved1[0x04];
 104        u32 usbcmd;             /* 0x10 */
 105        u32 usbsts;             /* 0x14 */
 106        u32 usbintr;            /* 0x18 */
 107        u32 frindex;            /* 0x1c */
 108        u32 ctrldssegment;      /* 0x20 */
 109        u32 periodiclistbase;   /* 0x24 */
 110        u32 asysnclistaddr;     /* 0x28 */
 111        u8 reserved2[0x24];
 112        u32 configflag;         /* 0x50 */
 113        u32 portsc_i;           /* 0x54 */
 114        u8 reserved3[0x38];
 115        u32 insreg00;           /* 0x90 */
 116        u32 insreg01;           /* 0x94 */
 117        u32 insreg02;           /* 0x98 */
 118        u32 insreg03;           /* 0x9c */
 119        u32 insreg04;           /* 0xa0 */
 120        u32 insreg05_utmi_ulpi; /* 0xa4 */
 121        u32 insreg06;           /* 0xa8 */
 122        u32 insreg07;           /* 0xac */
 123        u32 insreg08;           /* 0xb0 */
 124};
 125
 126#if !CONFIG_IS_ENABLED(DM_USB) || !CONFIG_IS_ENABLED(OF_CONTROL)
 127/*
 128 * FIXME: forward declaration of this structs needed because omap got the
 129 * ehci implementation backwards. move out ehci_hcd_x from board files
 130 */
 131struct ehci_hccr;
 132struct ehci_hcor;
 133
 134int omap_ehci_hcd_init(int index, struct omap_usbhs_board_data *usbhs_pdata,
 135                       struct ehci_hccr **hccr, struct ehci_hcor **hcor);
 136int omap_ehci_hcd_stop(void);
 137#endif
 138
 139#endif /* _OMAP_COMMON_EHCI_H_ */
 140