1
2
3
4
5
6#include <common.h>
7#include <i2c.h>
8#include <spl.h>
9#include <asm/io.h>
10#include <asm/arch/cpu.h>
11#include <asm/arch/soc.h>
12#include <linux/delay.h>
13
14#include "high_speed_env_spec.h"
15#include "board_env_spec.h"
16
17#define SERDES_VERSION "2.1.5"
18#define ENDED_OK "High speed PHY - Ended Successfully\n"
19
20static const u8 serdes_cfg[][SERDES_LAST_UNIT] = BIN_SERDES_CFG;
21
22extern MV_BIN_SERDES_CFG *serdes_info_tbl[];
23
24extern u8 rd78460gp_twsi_dev[];
25extern u8 db88f78xx0rev2_twsi_dev[];
26
27u32 pex_cfg_read(u32 pex_if, u32 bus, u32 dev, u32 func, u32 offs);
28int pex_local_bus_num_set(u32 pex_if, u32 bus_num);
29int pex_local_dev_num_set(u32 pex_if, u32 dev_num);
30
31#define MV_BOARD_PEX_MODULE_ADDR 0x23
32#define MV_BOARD_PEX_MODULE_ID 1
33#define MV_BOARD_ETM_MODULE_ID 2
34
35#define PEX_MODULE_DETECT 1
36#define ETM_MODULE_DETECT 2
37
38#define PEX_MODE_GET(satr) ((satr & 0x6) >> 1)
39#define PEX_CAPABILITY_GET(satr, port) ((satr >> port) & 1)
40#define MV_PEX_UNIT_TO_IF(pex_unit) ((pex_unit < 3) ? (pex_unit * 4) : 9)
41
42
43static int config_module;
44static int switch_module;
45
46
47static u32 board_id_get(void)
48{
49#if defined(CONFIG_DB_88F78X60)
50 return DB_88F78XX0_BP_ID;
51#elif defined(CONFIG_RD_88F78460_SERVER)
52 return RD_78460_SERVER_ID;
53#elif defined(CONFIG_RD_78460_SERVER_REV2)
54 return RD_78460_SERVER_REV2_ID;
55#elif defined(CONFIG_DB_78X60_PCAC)
56 return DB_78X60_PCAC_ID;
57#elif defined(CONFIG_DB_88F78X60_REV2)
58 return DB_88F78XX0_BP_REV2_ID;
59#elif defined(CONFIG_RD_78460_NAS)
60 return RD_78460_NAS_ID;
61#elif defined(CONFIG_DB_78X60_AMC)
62 return DB_78X60_AMC_ID;
63#elif defined(CONFIG_DB_78X60_PCAC_REV2)
64 return DB_78X60_PCAC_REV2_ID;
65#elif defined(CONFIG_DB_784MP_GP)
66 return DB_784MP_GP_ID;
67#elif defined(CONFIG_RD_78460_CUSTOMER)
68 return RD_78460_CUSTOMER_ID;
69#else
70
71
72
73
74 return 0;
75#endif
76}
77
78__weak u8 board_sat_r_get(u8 dev_num, u8 reg)
79{
80 u8 data;
81 u8 *dev;
82 u32 board_id = board_id_get();
83 int ret;
84
85 switch (board_id) {
86 case DB_78X60_AMC_ID:
87 case DB_78X60_PCAC_REV2_ID:
88 case RD_78460_CUSTOMER_ID:
89 case RD_78460_SERVER_ID:
90 case RD_78460_SERVER_REV2_ID:
91 case DB_78X60_PCAC_ID:
92 return (0x1 << 1) | 1;
93 case FPGA_88F78XX0_ID:
94 case RD_78460_NAS_ID:
95 return (0x0 << 1) | 1;
96 case DB_784MP_GP_ID:
97 dev = rd78460gp_twsi_dev;
98
99 break;
100 case DB_88F78XX0_BP_ID:
101 case DB_88F78XX0_BP_REV2_ID:
102 dev = db88f78xx0rev2_twsi_dev;
103 break;
104
105 default:
106 return 0;
107 }
108
109
110 i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
111 ret = i2c_read(dev[dev_num], 0, 1, (u8 *)&data, 1);
112 if (ret)
113 return MV_ERROR;
114
115 return data;
116}
117
118static int board_modules_scan(void)
119{
120 u8 val;
121 u32 board_id = board_id_get();
122 int ret;
123
124
125 if ((board_id == DB_88F78XX0_BP_ID) ||
126 (board_id == DB_88F78XX0_BP_REV2_ID)) {
127
128 config_module = 0;
129
130 i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
131
132
133 ret = i2c_read(MV_BOARD_PEX_MODULE_ADDR, 0, 1, (u8 *)&val, 1);
134 if (ret)
135 return MV_ERROR;
136
137 if (val == MV_BOARD_PEX_MODULE_ID)
138 config_module = PEX_MODULE_DETECT;
139 if (val == MV_BOARD_ETM_MODULE_ID)
140 config_module = ETM_MODULE_DETECT;
141 } else if (board_id == RD_78460_NAS_ID) {
142 switch_module = 0;
143 if ((reg_read(GPP_DATA_IN_REG(2)) & MV_GPP66) == 0x0)
144 switch_module = 1;
145 }
146
147 return MV_OK;
148}
149
150u32 pex_max_unit_get(void)
151{
152
153
154
155
156
157 return MV_PEX_MAX_UNIT;
158}
159
160u32 pex_max_if_get(void)
161{
162
163
164
165
166
167 return MV_PEX_MAX_IF;
168}
169
170u8 board_cpu_freq_get(void)
171{
172 u32 sar;
173 u32 sar_msb;
174
175 sar = reg_read(MPP_SAMPLE_AT_RESET(0));
176 sar_msb = reg_read(MPP_SAMPLE_AT_RESET(1));
177 return ((sar_msb & 0x100000) >> 17) | ((sar & 0xe00000) >> 21);
178}
179
180__weak MV_BIN_SERDES_CFG *board_serdes_cfg_get(void)
181{
182 u32 board_id;
183 u32 serdes_cfg_val = 0;
184
185 board_id = board_id_get();
186
187 switch (board_id) {
188 case DB_784MP_GP_ID:
189 serdes_cfg_val = 0;
190 break;
191 }
192
193 return &serdes_info_tbl[board_id - BOARD_ID_BASE][serdes_cfg_val];
194}
195
196u16 ctrl_model_get(void)
197{
198
199
200
201
202#if defined(CONFIG_MV78230)
203 return MV_78230_DEV_ID;
204#elif defined(CONFIG_MV78260)
205 return MV_78260_DEV_ID;
206#else
207 return MV_78460_DEV_ID;
208#endif
209}
210
211u32 get_line_cfg(u32 line_num, MV_BIN_SERDES_CFG *info)
212{
213 if (line_num < 8)
214 return (info->line0_7 >> (line_num << 2)) & 0xF;
215 else
216 return (info->line8_15 >> ((line_num - 8) << 2)) & 0xF;
217}
218
219static int serdes_max_lines_get(void)
220{
221 switch (ctrl_model_get()) {
222 case MV_78230_DEV_ID:
223 return 7;
224 case MV_78260_DEV_ID:
225 return 12;
226 case MV_78460_DEV_ID:
227 return 16;
228 }
229
230 return 0;
231}
232
233
234
235
236
237
238
239
240
241
242
243
244
245__weak u8 serdes_pex_pulse_width[4] = { 2, 2, 2, 2 };
246
247int serdes_phy_config(void)
248{
249 int status = MV_OK;
250 u32 line_cfg;
251 u8 line_num;
252
253 u32 addr[16][11], val[16][11];
254 u8 pex_unit, pex_line_num;
255 u8 sgmii_port = 0;
256 u32 tmp;
257 u32 in_direct;
258 u8 max_serdes_lines;
259 MV_BIN_SERDES_CFG *info;
260 u8 satr11;
261 u8 sata_port;
262 u8 freq;
263 u8 device_rev;
264 u32 rx_high_imp_mode;
265 u16 ctrl_mode;
266 u32 pex_if;
267 u32 pex_if_num;
268
269
270
271
272 max_serdes_lines = serdes_max_lines_get();
273 if (max_serdes_lines == 0)
274 return MV_OK;
275
276 satr11 = board_sat_r_get(1, 1);
277 if ((u8) MV_ERROR == (u8) satr11)
278 return MV_ERROR;
279
280 board_modules_scan();
281 memset(addr, 0, sizeof(addr));
282 memset(val, 0, sizeof(val));
283
284
285 if (reg_read(REG_BOOTROM_ROUTINE_ADDR) &
286 (1 << REG_BOOTROM_ROUTINE_DRAM_INIT_OFFS)) {
287 DEBUG_INIT_S("High speed PHY - Version: ");
288 DEBUG_INIT_S(SERDES_VERSION);
289 DEBUG_INIT_S(" - 2nd boot - Skip\n");
290 return MV_OK;
291 }
292 DEBUG_INIT_S("High speed PHY - Version: ");
293 DEBUG_INIT_S(SERDES_VERSION);
294 DEBUG_INIT_S(" (COM-PHY-V20)\n");
295
296
297
298
299 freq = board_cpu_freq_get();
300 device_rev = mv_ctrl_rev_get();
301
302 if (device_rev == 2) {
303 u32 cpu_avs;
304 u8 fabric_freq;
305 cpu_avs = reg_read(CPU_AVS_CONTROL2_REG);
306 DEBUG_RD_REG(CPU_AVS_CONTROL2_REG, cpu_avs);
307 cpu_avs &= ~(1 << 9);
308
309 if ((0x4 == freq) || (0xB == freq)) {
310 u32 tmp2;
311
312 tmp2 = reg_read(CPU_AVS_CONTROL0_REG);
313 DEBUG_RD_REG(CPU_AVS_CONTROL0_REG, tmp2);
314
315 tmp2 |= 0x0FF;
316 reg_write(CPU_AVS_CONTROL0_REG, tmp2);
317 DEBUG_WR_REG(CPU_AVS_CONTROL0_REG, tmp2);
318 cpu_avs |= (1 << 9);
319 cpu_avs |= (1 << 18);
320 fabric_freq = (reg_read(MPP_SAMPLE_AT_RESET(0)) &
321 SAR0_FABRIC_FREQ_MASK) >> SAR0_FABRIC_FREQ_OFFSET;
322 if ((0xB == freq) && (5 == fabric_freq)) {
323 u32 core_avs;
324
325 core_avs = reg_read(CORE_AVS_CONTROL_0REG);
326 DEBUG_RD_REG(CORE_AVS_CONTROL_0REG, core_avs);
327
328
329
330
331
332 core_avs &= ~(0xff);
333 core_avs |= 0x0E;
334 reg_write(CORE_AVS_CONTROL_0REG, core_avs);
335 DEBUG_WR_REG(CORE_AVS_CONTROL_0REG, core_avs);
336
337 core_avs = reg_read(CORE_AVS_CONTROL_2REG);
338 DEBUG_RD_REG(CORE_AVS_CONTROL_2REG, core_avs);
339 core_avs |= (1 << 9);
340 reg_write(CORE_AVS_CONTROL_2REG, core_avs);
341 DEBUG_WR_REG(CORE_AVS_CONTROL_2REG, core_avs);
342
343 tmp2 = reg_read(GENERAL_PURPOSE_RESERVED0_REG);
344 DEBUG_RD_REG(GENERAL_PURPOSE_RESERVED0_REG,
345 tmp2);
346 tmp2 |= 0x1;
347 reg_write(GENERAL_PURPOSE_RESERVED0_REG, tmp2);
348 DEBUG_WR_REG(GENERAL_PURPOSE_RESERVED0_REG,
349 tmp2);
350 }
351 }
352 reg_write(CPU_AVS_CONTROL2_REG, cpu_avs);
353 DEBUG_WR_REG(CPU_AVS_CONTROL2_REG, cpu_avs);
354 }
355
356 info = board_serdes_cfg_get();
357
358 if (info == NULL) {
359 DEBUG_INIT_S("Hight speed PHY Error #1\n");
360 return MV_ERROR;
361 }
362 DEBUG_INIT_FULL_S("info->line0_7= 0x");
363 DEBUG_INIT_FULL_D(info->line0_7, 8);
364 DEBUG_INIT_FULL_S(" info->line8_15= 0x");
365 DEBUG_INIT_FULL_D(info->line8_15, 8);
366 DEBUG_INIT_FULL_S("\n");
367
368 if (config_module & ETM_MODULE_DETECT) {
369 DEBUG_INIT_FULL_S("ETM module detect Step 0.9:\n");
370 reg_write(SERDES_LINE_MUX_REG_0_7, 0x11111111);
371 DEBUG_WR_REG(SERDES_LINE_MUX_REG_0_7, 0x11111111);
372 info->pex_mode[1] = PEX_BUS_DISABLED;
373 mdelay(100);
374 reg_write(PEX_PHY_ACCESS_REG(1), (0x002 << 16) | 0xf44d);
375 DEBUG_WR_REG(PEX_PHY_ACCESS_REG(1), (0x002 << 16) | 0xf44d);
376 reg_write(PEX_PHY_ACCESS_REG(1), (0x302 << 16) | 0xf44d);
377 DEBUG_WR_REG(PEX_PHY_ACCESS_REG(1), (0x302 << 16) | 0xf44d);
378 reg_write(PEX_PHY_ACCESS_REG(1), (0x001 << 16) | 0xf801);
379 DEBUG_WR_REG(PEX_PHY_ACCESS_REG(1), (0x001 << 16) | 0xf801);
380 reg_write(PEX_PHY_ACCESS_REG(1), (0x301 << 16) | 0xf801);
381 DEBUG_WR_REG(PEX_PHY_ACCESS_REG(1), (0x301 << 16) | 0xf801);
382 reg_write(PEX_PHY_ACCESS_REG(1), (0x011 << 16) | 0x0BFF);
383 DEBUG_WR_REG(PEX_PHY_ACCESS_REG(1), (0x011 << 16) | 0x0BFF);
384 reg_write(PEX_PHY_ACCESS_REG(1), (0x311 << 16) | 0x0BFF);
385 DEBUG_WR_REG(PEX_PHY_ACCESS_REG(1), (0x311 << 16) | 0x0BFF);
386 reg_write(PEX_PHY_ACCESS_REG(1), (0x023 << 16) | 0x0800);
387 DEBUG_WR_REG(PEX_PHY_ACCESS_REG(1), (0x023 << 16) | 0x0800);
388 reg_write(PEX_PHY_ACCESS_REG(1), (0x323 << 16) | 0x0800);
389 DEBUG_WR_REG(PEX_PHY_ACCESS_REG(1), (0x323 << 16) | 0x0800);
390 reg_write(PEX_PHY_ACCESS_REG(1), (0x046 << 16) | 0x0400);
391 DEBUG_WR_REG(PEX_PHY_ACCESS_REG(1), (0x046 << 16) | 0x0400);
392 reg_write(PEX_PHY_ACCESS_REG(1), (0x346 << 16) | 0x0400);
393 DEBUG_WR_REG(PEX_PHY_ACCESS_REG(1), (0x346 << 16) | 0x0400);
394 }
395
396
397 DEBUG_INIT_FULL_S("Step 1: First phase of PEX-PIPE Configuration\n");
398 for (pex_unit = 0; pex_unit < pex_max_unit_get(); pex_unit++) {
399 if (info->pex_mode[pex_unit] == PEX_BUS_DISABLED)
400 continue;
401
402
403 reg_write(PEX_PHY_ACCESS_REG(pex_unit), (0xC1 << 16) | 0x25);
404 DEBUG_WR_REG(PEX_PHY_ACCESS_REG(pex_unit), (0xC1 << 16) | 0x25);
405
406
407 if (info->pex_mode[pex_unit] == PEX_BUS_MODE_X4) {
408 reg_write(PEX_PHY_ACCESS_REG(pex_unit),
409 (0xC2 << 16) | 0x200);
410 DEBUG_WR_REG(PEX_PHY_ACCESS_REG(pex_unit),
411 (0xC2 << 16) | 0x200);
412 }
413
414
415 if (info->pex_mode[pex_unit] == PEX_BUS_MODE_X1) {
416 reg_write(PEX_PHY_ACCESS_REG(pex_unit),
417 (0xC3 << 16) | 0x0F);
418 DEBUG_WR_REG(PEX_PHY_ACCESS_REG(pex_unit),
419 (0xC3 << 16) | 0x0F);
420 }
421
422 reg_write(PEX_PHY_ACCESS_REG(pex_unit), (0xC5 << 16) | 0x11F);
423 DEBUG_WR_REG(PEX_PHY_ACCESS_REG(pex_unit),
424 (0xC5 << 16) | 0x11F);
425 }
426
427
428
429
430
431 DEBUG_INIT_FULL_S("Step 2: Configure the desire PIN_PHY_GEN\n");
432 for (line_num = 0; line_num < max_serdes_lines; line_num++) {
433 line_cfg = get_line_cfg(line_num, info);
434 if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_UNCONNECTED])
435 continue;
436 if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_PEX])
437 continue;
438 if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SATA]) {
439 switch (line_num) {
440 case 4:
441 case 6:
442 sata_port = 0;
443 break;
444 case 5:
445 sata_port = 1;
446 break;
447 default:
448 DEBUG_INIT_C
449 ("SATA port error for serdes line: ",
450 line_num, 2);
451 return MV_ERROR;
452 }
453 tmp = reg_read(SATA_LP_PHY_EXT_CTRL_REG(sata_port));
454 DEBUG_RD_REG(SATA_LP_PHY_EXT_CTRL_REG(sata_port), tmp);
455 tmp &= ~((0x1ff << 5) | 0x7);
456 tmp |= ((info->bus_speed & (1 << line_num)) != 0) ?
457 (0x11 << 5) : 0x0;
458
459 reg_write(SATA_LP_PHY_EXT_CTRL_REG(sata_port), tmp);
460 DEBUG_WR_REG(SATA_LP_PHY_EXT_CTRL_REG(sata_port), tmp);
461 }
462
463 if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_QSGMII]) {
464
465
466
467
468 tmp = reg_read(SGMII_SERDES_CFG_REG(0));
469 DEBUG_RD_REG(SGMII_SERDES_CFG_REG(0), tmp);
470 tmp &= ~((0x1ff << 5) | 0x7);
471 tmp |= 0x660;
472 reg_write(SGMII_SERDES_CFG_REG(0), tmp);
473 DEBUG_WR_REG(SGMII_SERDES_CFG_REG(0), tmp);
474 continue;
475 }
476
477 if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII0])
478 sgmii_port = 0;
479 else if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII1])
480 sgmii_port = 1;
481 else if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII2])
482 sgmii_port = 2;
483 else if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII3])
484 sgmii_port = 3;
485 else
486 continue;
487
488 tmp = reg_read(SGMII_SERDES_CFG_REG(sgmii_port));
489 DEBUG_RD_REG(SGMII_SERDES_CFG_REG(sgmii_port), tmp);
490 tmp &= ~((0x1ff << 5) | 0x7);
491 tmp |= (((info->bus_speed & (1 << line_num)) != 0) ?
492 (0x88 << 5) : (0x66 << 5));
493 reg_write(SGMII_SERDES_CFG_REG(sgmii_port), tmp);
494 DEBUG_WR_REG(SGMII_SERDES_CFG_REG(sgmii_port), tmp);
495 }
496
497
498 DEBUG_INIT_FULL_S("Step 3 QSGMII enable\n");
499 for (line_num = 0; line_num < max_serdes_lines; line_num++) {
500 line_cfg = get_line_cfg(line_num, info);
501 if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_QSGMII]) {
502
503 tmp = reg_read(QSGMII_CONTROL_1_REG);
504 DEBUG_RD_REG(QSGMII_CONTROL_1_REG, tmp);
505 tmp |= (1 << 30);
506#ifdef ERRATA_GL_6572255
507 tmp |= (1 << 27);
508#endif
509 reg_write(QSGMII_CONTROL_1_REG, tmp);
510 DEBUG_WR_REG(QSGMII_CONTROL_1_REG, tmp);
511 }
512 }
513
514
515 DEBUG_INIT_FULL_S("Step 4: Configure SERDES MUXes\n");
516 if (config_module & ETM_MODULE_DETECT) {
517 reg_write(SERDES_LINE_MUX_REG_0_7, 0x40041111);
518 DEBUG_WR_REG(SERDES_LINE_MUX_REG_0_7, 0x40041111);
519 } else {
520 reg_write(SERDES_LINE_MUX_REG_0_7, info->line0_7);
521 DEBUG_WR_REG(SERDES_LINE_MUX_REG_0_7, info->line0_7);
522 }
523 reg_write(SERDES_LINE_MUX_REG_8_15, info->line8_15);
524 DEBUG_WR_REG(SERDES_LINE_MUX_REG_8_15, info->line8_15);
525
526
527 DEBUG_INIT_FULL_S("Step 5: Activate the RX High Impedance Mode\n");
528 rx_high_imp_mode = 0x8080;
529 if (device_rev == 2)
530 rx_high_imp_mode |= 4;
531
532 for (line_num = 0; line_num < max_serdes_lines; line_num++) {
533
534 DEBUG_INIT_FULL_S("SERDES ");
535 DEBUG_INIT_FULL_D_10(line_num, 2);
536 line_cfg = get_line_cfg(line_num, info);
537 if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_UNCONNECTED]) {
538 DEBUG_INIT_FULL_S(" unconnected ***\n");
539 continue;
540 }
541 if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_PEX]) {
542 pex_unit = line_num >> 2;
543 pex_line_num = line_num % 4;
544 DEBUG_INIT_FULL_S(" - PEX unit ");
545 DEBUG_INIT_FULL_D_10(pex_unit, 1);
546 DEBUG_INIT_FULL_S(" line= ");
547 DEBUG_INIT_FULL_D_10(pex_line_num, 1);
548 DEBUG_INIT_FULL_S("\n");
549
550
551 if ((line_num > 7) &&
552 (info->pex_mode[3] == PEX_BUS_MODE_X8))
553
554 pex_unit = 3;
555
556 if (info->pex_mode[pex_unit] == PEX_BUS_DISABLED)
557 continue;
558
559
560
561
562
563
564
565
566
567
568
569 if (info->pex_mode[pex_unit] == PEX_BUS_MODE_X1) {
570 in_direct = (0x48 << 16) | (pex_line_num << 24) |
571 0x1000 | rx_high_imp_mode;
572 } else if ((info->pex_mode[pex_unit] ==
573 PEX_BUS_MODE_X4) && (pex_line_num == 0))
574 in_direct = (0x48 << 16) | (pex_line_num << 24) |
575 0x1000 | (rx_high_imp_mode & 0xff);
576 else
577 in_direct = 0;
578
579 if (in_direct) {
580 reg_write(PEX_PHY_ACCESS_REG(pex_unit),
581 in_direct);
582 DEBUG_WR_REG(PEX_PHY_ACCESS_REG(pex_unit),
583 in_direct);
584 }
585
586 continue;
587 }
588
589 if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SATA]) {
590
591
592
593
594 sata_port = line_num & 1;
595 DEBUG_INIT_FULL_S(" - SATA port ");
596 DEBUG_INIT_FULL_D_10(sata_port, 2);
597 DEBUG_INIT_FULL_S("\n");
598 reg_write(SATA_COMPHY_CTRL_REG(sata_port),
599 rx_high_imp_mode);
600 DEBUG_WR_REG(SATA_COMPHY_CTRL_REG(sata_port),
601 rx_high_imp_mode);
602 continue;
603 }
604
605 if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_QSGMII]) {
606 DEBUG_INIT_FULL_S(" - QSGMII\n");
607 reg_write(SGMII_COMPHY_CTRL_REG(0), rx_high_imp_mode);
608 DEBUG_WR_REG(SGMII_COMPHY_CTRL_REG(0),
609 rx_high_imp_mode);
610 continue;
611 }
612
613 if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII0])
614 sgmii_port = 0;
615 else if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII1])
616 sgmii_port = 1;
617 else if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII2])
618 sgmii_port = 2;
619 else if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII3])
620 sgmii_port = 3;
621 else
622 continue;
623 DEBUG_INIT_FULL_S(" - SGMII port ");
624 DEBUG_INIT_FULL_D_10(sgmii_port, 2);
625 DEBUG_INIT_FULL_S("\n");
626 reg_write(SGMII_COMPHY_CTRL_REG(sgmii_port), rx_high_imp_mode);
627 DEBUG_WR_REG(SGMII_COMPHY_CTRL_REG(sgmii_port),
628 rx_high_imp_mode);
629 }
630
631
632 DEBUG_INIT_FULL_S("Step 6: [PEX-Only] PEX-Main configuration (X4 or X1)\n");
633 tmp = reg_read(SOC_CTRL_REG);
634 DEBUG_RD_REG(SOC_CTRL_REG, tmp);
635 tmp &= 0x200;
636 if (info->pex_mode[0] == PEX_BUS_MODE_X1)
637 tmp |= PCIE0_QUADX1_EN;
638 if (info->pex_mode[1] == PEX_BUS_MODE_X1)
639 tmp |= PCIE1_QUADX1_EN;
640 if (((reg_read(MPP_SAMPLE_AT_RESET(0)) & PEX_CLK_100MHZ_MASK) >>
641 PEX_CLK_100MHZ_OFFSET) == 0x1)
642 tmp |= (PCIE0_CLK_OUT_EN_MASK | PCIE1_CLK_OUT_EN_MASK);
643
644 reg_write(SOC_CTRL_REG, tmp);
645 DEBUG_WR_REG(SOC_CTRL_REG, tmp);
646
647
648 DEBUG_INIT_FULL_S("Step 6.2: [PEX-Only] PCI Express Link Capabilities\n");
649
650 for (line_num = 0; line_num < max_serdes_lines; line_num++) {
651 line_cfg = get_line_cfg(line_num, info);
652
653 if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_PEX]) {
654
655
656
657
658
659
660 pex_unit = line_num >> 2;
661 pex_if = MV_SERDES_NUM_TO_PEX_NUM(line_num);
662 if (info->pex_mode[pex_unit] == PEX_BUS_DISABLED)
663 continue;
664
665
666 tmp = reg_read(PEX_LINK_CTRL_STATUS_REG(pex_if));
667 DEBUG_RD_REG(PEX_LINK_CTRL_STATUS_REG(pex_if), tmp);
668 tmp |= (1 << 6);
669 reg_write(PEX_LINK_CTRL_STATUS_REG(pex_if), tmp);
670 DEBUG_WR_REG(PEX_LINK_CTRL_STATUS_REG(pex_if), tmp);
671
672 tmp = reg_read(PEX_LINK_CAPABILITIES_REG(pex_if));
673 DEBUG_RD_REG(PEX_LINK_CAPABILITIES_REG(pex_if), tmp);
674 tmp &= ~(0x3FF);
675 if (info->pex_mode[pex_unit] == PEX_BUS_MODE_X1)
676 tmp |= (0x1 << 4);
677 if (info->pex_mode[pex_unit] == PEX_BUS_MODE_X4)
678 tmp |= (0x4 << 4);
679 if (0 == PEX_CAPABILITY_GET(satr11, pex_unit))
680 tmp |= 0x1;
681 else
682 tmp |= 0x2;
683 DEBUG_INIT_FULL_S("Step 6.2: PEX ");
684 DEBUG_INIT_FULL_D(pex_if, 1);
685 DEBUG_INIT_FULL_C(" set GEN", (tmp & 3), 1);
686 reg_write(PEX_LINK_CAPABILITIES_REG(pex_if), tmp);
687 DEBUG_WR_REG(PEX_LINK_CAPABILITIES_REG(pex_if), tmp);
688
689
690
691
692
693 if (info->pex_mode[pex_unit] == PEX_BUS_MODE_X4)
694 line_num += 3;
695 }
696 }
697
698
699
700
701
702
703 DEBUG_INIT_FULL_S("Step 7: [PEX-X4 Only] To create PEX-Link\n");
704 tmp = reg_read(GEN_PURP_RES_2_REG);
705 DEBUG_RD_REG(GEN_PURP_RES_2_REG, tmp);
706
707 tmp &= 0xFFFF0000;
708 if (info->pex_mode[0] == PEX_BUS_MODE_X4)
709 tmp |= 0x0000000F;
710
711 if (info->pex_mode[1] == PEX_BUS_MODE_X4)
712 tmp |= 0x000000F0;
713
714 if (info->pex_mode[2] == PEX_BUS_MODE_X4)
715 tmp |= 0x00000F00;
716
717 if (info->pex_mode[3] == PEX_BUS_MODE_X4)
718 tmp |= 0x0000F000;
719
720 reg_write(GEN_PURP_RES_2_REG, tmp);
721 DEBUG_WR_REG(GEN_PURP_RES_2_REG, tmp);
722
723
724 DEBUG_INIT_FULL_S("Steps 7,8,9,10 and 11\n");
725
726
727 for (line_num = 0; line_num < max_serdes_lines; line_num++) {
728
729
730 line_cfg = get_line_cfg(line_num, info);
731
732 if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_UNCONNECTED])
733 continue;
734
735 if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_PEX]) {
736 pex_unit = line_num >> 2;
737 pex_line_num = line_num % 4;
738
739 if (info->pex_mode[pex_unit] == PEX_BUS_DISABLED)
740 continue;
741
742
743
744
745
746
747 if (((info->pex_mode[pex_unit] == PEX_BUS_MODE_X4) &&
748 (0 == pex_line_num))
749 || ((info->pex_mode[pex_unit] == PEX_BUS_MODE_X1))) {
750 reg_write(PEX_PHY_ACCESS_REG(pex_unit),
751 (0x01 << 16) | (pex_line_num << 24) |
752 0xFC60);
753 DEBUG_WR_REG(PEX_PHY_ACCESS_REG(pex_unit),
754 (0x01 << 16) | (pex_line_num << 24)
755 | 0xFC60);
756
757
758
759
760
761
762 reg_write(PEX_PHY_ACCESS_REG(pex_unit),
763 (0x02 << 16) | (1 << 31) |
764 (pex_line_num << 24));
765 DEBUG_WR_REG(PEX_PHY_ACCESS_REG(pex_unit),
766 (0x02 << 16) | (1 << 31) |
767 (pex_line_num << 24));
768 tmp = reg_read(PEX_PHY_ACCESS_REG(pex_unit));
769 DEBUG_RD_REG(PEX_PHY_ACCESS_REG(pex_unit), tmp);
770 tmp &= ~(1 << 31);
771 tmp |= (1 << 8);
772 reg_write(PEX_PHY_ACCESS_REG(pex_unit), tmp);
773 DEBUG_WR_REG(PEX_PHY_ACCESS_REG(pex_unit), tmp);
774
775
776 reg_write(PEX_PHY_ACCESS_REG(pex_unit),
777 (0x81 << 16) | (1 << 31) |
778 (pex_line_num << 24));
779 DEBUG_WR_REG(PEX_PHY_ACCESS_REG(pex_unit),
780 (0x81 << 16) | (1 << 31) |
781 (pex_line_num << 24));
782 tmp = reg_read(PEX_PHY_ACCESS_REG(pex_unit));
783 DEBUG_RD_REG(PEX_PHY_ACCESS_REG(pex_unit), tmp);
784 tmp &= ~(1 << 31);
785 tmp |= (3 << 9);
786 reg_write(PEX_PHY_ACCESS_REG(pex_unit), tmp);
787 DEBUG_WR_REG(PEX_PHY_ACCESS_REG(pex_unit), tmp);
788 }
789
790 continue;
791 }
792
793 if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SATA]) {
794
795
796
797
798 sata_port = line_num & 1;
799
800
801
802
803
804
805
806 reg_write(SATA_PWR_PLL_CTRL_REG(sata_port), 0xF801);
807 DEBUG_WR_REG(SATA_PWR_PLL_CTRL_REG(sata_port), 0xF801);
808
809
810 reg_write(SATA_DIG_LP_ENA_REG(sata_port), 0x400);
811 DEBUG_WR_REG(SATA_DIG_LP_ENA_REG(sata_port), 0x400);
812
813
814
815 reg_write(SATA_REF_CLK_SEL_REG(sata_port), 0x400);
816 DEBUG_WR_REG(SATA_REF_CLK_SEL_REG(sata_port), 0x400);
817
818
819 tmp = reg_read(SATA_LP_PHY_EXT_CTRL_REG(sata_port));
820 DEBUG_RD_REG(SATA_LP_PHY_EXT_CTRL_REG(sata_port), tmp);
821 tmp |= 7;
822 reg_write(SATA_LP_PHY_EXT_CTRL_REG(sata_port), tmp);
823 DEBUG_WR_REG(SATA_LP_PHY_EXT_CTRL_REG(sata_port), tmp);
824
825 continue;
826 }
827
828 if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_QSGMII]) {
829
830
831
832
833 reg_write(SGMII_PWR_PLL_CTRL_REG(0), 0xF881);
834 DEBUG_WR_REG(SGMII_PWR_PLL_CTRL_REG(0), 0xF881);
835
836
837
838
839
840 reg_write(SGMII_DIG_LP_ENA_REG(0), 0x400);
841 DEBUG_WR_REG(SGMII_DIG_LP_ENA_REG(0), 0x400);
842
843
844
845
846
847 reg_write(SGMII_REF_CLK_SEL_REG(0), 0x400);
848 DEBUG_WR_REG(SGMII_REF_CLK_SEL_REG(0), 0x400);
849
850
851 tmp = reg_read(SGMII_SERDES_CFG_REG(0));
852 DEBUG_RD_REG(SGMII_SERDES_CFG_REG(0), tmp);
853 tmp |= 7;
854 reg_write(SGMII_SERDES_CFG_REG(0), tmp);
855 DEBUG_WR_REG(SGMII_SERDES_CFG_REG(0), tmp);
856 continue;
857 }
858
859 if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII0])
860 sgmii_port = 0;
861 else if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII1])
862 sgmii_port = 1;
863 else if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII2])
864 sgmii_port = 2;
865 else if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII3])
866 sgmii_port = 3;
867 else
868 continue;
869
870
871
872
873
874 reg_write(SGMII_PWR_PLL_CTRL_REG(sgmii_port), 0xF881);
875 DEBUG_WR_REG(SGMII_PWR_PLL_CTRL_REG(sgmii_port), 0xF881);
876
877
878 reg_write(SGMII_DIG_LP_ENA_REG(sgmii_port), 0);
879 DEBUG_WR_REG(SGMII_DIG_LP_ENA_REG(sgmii_port), 0);
880
881
882 reg_write(SGMII_REF_CLK_SEL_REG(sgmii_port), 0x400);
883 DEBUG_WR_REG(SGMII_REF_CLK_SEL_REG(sgmii_port), 0x400);
884
885
886 tmp = reg_read(SGMII_SERDES_CFG_REG(sgmii_port));
887 DEBUG_RD_REG(SGMII_SERDES_CFG_REG(sgmii_port), tmp);
888 tmp |= 7;
889 reg_write(SGMII_SERDES_CFG_REG(sgmii_port), tmp);
890 DEBUG_WR_REG(SGMII_SERDES_CFG_REG(sgmii_port), tmp);
891
892 }
893
894
895 DEBUG_INIT_FULL_S("Steps 12: [PEX-Only] Last phase of PEX-PIPE Configuration\n");
896 for (line_num = 0; line_num < max_serdes_lines; line_num++) {
897
898
899 line_cfg = get_line_cfg(line_num, info);
900
901 if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_UNCONNECTED])
902 continue;
903
904 if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_PEX]) {
905 pex_unit = line_num >> 2;
906 pex_line_num = line_num % 4;
907 if (0 == pex_line_num) {
908
909
910
911
912
913
914 reg_write(PEX_PHY_ACCESS_REG(pex_unit),
915 (0x48 << 16) | (1 << 31) |
916 (pex_line_num << 24));
917 tmp = reg_read(PEX_PHY_ACCESS_REG(pex_unit));
918 tmp &= ~(1 << 31);
919 tmp &= ~(3 << 6);
920
921 tmp |= serdes_pex_pulse_width[pex_unit] << 6;
922
923 reg_write(PEX_PHY_ACCESS_REG(pex_unit), tmp);
924
925 reg_write(PEX_PHY_ACCESS_REG(pex_unit),
926 (0xC1 << 16) | 0x24);
927 DEBUG_WR_REG(PEX_PHY_ACCESS_REG(pex_unit),
928 (0xC1 << 16) | 0x24);
929 }
930 }
931 }
932
933
934
935 DEBUG_INIT_FULL_S("Steps 13: Wait 15ms before checking results");
936 mdelay(15);
937 tmp = 20;
938 while (tmp) {
939 status = MV_OK;
940 for (line_num = 0; line_num < max_serdes_lines; line_num++) {
941 u32 tmp;
942 line_cfg = get_line_cfg(line_num, info);
943 if (line_cfg ==
944 serdes_cfg[line_num][SERDES_UNIT_UNCONNECTED])
945 continue;
946
947 if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_PEX])
948 continue;
949
950 if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SATA]) {
951
952
953
954
955 sata_port = line_num & 1;
956
957 tmp =
958 reg_read(SATA_LP_PHY_EXT_STAT_REG
959 (sata_port));
960 DEBUG_RD_REG(SATA_LP_PHY_EXT_STAT_REG
961 (sata_port), tmp);
962 if ((tmp & 0x7) != 0x7)
963 status = MV_ERROR;
964 continue;
965 }
966
967 if (line_cfg ==
968 serdes_cfg[line_num][SERDES_UNIT_QSGMII]) {
969 tmp = reg_read(SGMII_SERDES_STAT_REG(0));
970 DEBUG_RD_REG(SGMII_SERDES_STAT_REG(0), tmp);
971 if ((tmp & 0x7) != 0x7)
972 status = MV_ERROR;
973 continue;
974 }
975
976 if (line_cfg ==
977 serdes_cfg[line_num][SERDES_UNIT_SGMII0])
978 sgmii_port = 0;
979 else if (line_cfg ==
980 serdes_cfg[line_num][SERDES_UNIT_SGMII1])
981 sgmii_port = 1;
982 else if (line_cfg ==
983 serdes_cfg[line_num][SERDES_UNIT_SGMII2])
984 sgmii_port = 2;
985 else if (line_cfg ==
986 serdes_cfg[line_num][SERDES_UNIT_SGMII3])
987 sgmii_port = 3;
988 else
989 continue;
990
991 tmp = reg_read(SGMII_SERDES_STAT_REG(sgmii_port));
992 DEBUG_RD_REG(SGMII_SERDES_STAT_REG(sgmii_port), tmp);
993 if ((tmp & 0x7) != 0x7)
994 status = MV_ERROR;
995 }
996
997 if (status == MV_OK)
998 break;
999 mdelay(5);
1000 tmp--;
1001 }
1002
1003
1004
1005
1006
1007 DEBUG_INIT_FULL_S("Steps 14: [PEX-Only] In order to configure\n");
1008 for (pex_unit = 0; pex_unit < pex_max_unit_get(); pex_unit++) {
1009 if (info->pex_mode[pex_unit] == PEX_BUS_DISABLED)
1010 continue;
1011 tmp =
1012 reg_read(PEX_CAPABILITIES_REG(MV_PEX_UNIT_TO_IF(pex_unit)));
1013 DEBUG_RD_REG(PEX_CAPABILITIES_REG(MV_PEX_UNIT_TO_IF(pex_unit)),
1014 tmp);
1015 tmp &= ~(0xf << 20);
1016 if (info->pex_type == MV_PEX_ROOT_COMPLEX)
1017 tmp |= (0x4 << 20);
1018 else
1019 tmp |= (0x1 << 20);
1020 reg_write(PEX_CAPABILITIES_REG(MV_PEX_UNIT_TO_IF(pex_unit)),
1021 tmp);
1022 DEBUG_WR_REG(PEX_CAPABILITIES_REG(MV_PEX_UNIT_TO_IF(pex_unit)),
1023 tmp);
1024 }
1025
1026
1027
1028
1029
1030 DEBUG_INIT_FULL_S("Steps 15: [PEX-Only] In order to configure\n");
1031 for (pex_unit = 0; pex_unit < pex_max_unit_get(); pex_unit++) {
1032 if (info->pex_mode[pex_unit] == PEX_BUS_DISABLED)
1033 continue;
1034 if (info->pex_type == MV_PEX_END_POINT) {
1035 tmp =
1036 reg_read(PEX_DBG_CTRL_REG
1037 (MV_PEX_UNIT_TO_IF(pex_unit)));
1038 DEBUG_RD_REG(PEX_DBG_CTRL_REG
1039 (MV_PEX_UNIT_TO_IF(pex_unit)), tmp);
1040 tmp &= 0xfff6ffff;
1041 reg_write(PEX_DBG_CTRL_REG(MV_PEX_UNIT_TO_IF(pex_unit)),
1042 tmp);
1043 DEBUG_WR_REG(PEX_DBG_CTRL_REG
1044 (MV_PEX_UNIT_TO_IF(pex_unit)), tmp);
1045 }
1046 }
1047
1048 if (info->serdes_m_phy_change) {
1049 MV_SERDES_CHANGE_M_PHY *serdes_m_phy_change;
1050 u32 bus_speed;
1051 for (line_num = 0; line_num < max_serdes_lines; line_num++) {
1052 line_cfg = get_line_cfg(line_num, info);
1053 if (line_cfg ==
1054 serdes_cfg[line_num][SERDES_UNIT_UNCONNECTED])
1055 continue;
1056 serdes_m_phy_change = info->serdes_m_phy_change;
1057 bus_speed = info->bus_speed & (1 << line_num);
1058 while (serdes_m_phy_change->type !=
1059 SERDES_UNIT_UNCONNECTED) {
1060 switch (serdes_m_phy_change->type) {
1061 case SERDES_UNIT_PEX:
1062 if (line_cfg != SERDES_UNIT_PEX)
1063 break;
1064 pex_unit = line_num >> 2;
1065 pex_line_num = line_num % 4;
1066 if (info->pex_mode[pex_unit] ==
1067 PEX_BUS_DISABLED)
1068 break;
1069 if ((info->pex_mode[pex_unit] ==
1070 PEX_BUS_MODE_X4) && pex_line_num)
1071 break;
1072
1073 if (bus_speed) {
1074 reg_write(PEX_PHY_ACCESS_REG
1075 (pex_unit),
1076 (pex_line_num << 24) |
1077 serdes_m_phy_change->val_hi_speed);
1078 DEBUG_WR_REG(PEX_PHY_ACCESS_REG
1079 (pex_unit),
1080 (pex_line_num <<
1081 24) |
1082 serdes_m_phy_change->val_hi_speed);
1083 } else {
1084 reg_write(PEX_PHY_ACCESS_REG
1085 (pex_unit),
1086 (pex_line_num << 24) |
1087 serdes_m_phy_change->val_low_speed);
1088 DEBUG_WR_REG(PEX_PHY_ACCESS_REG
1089 (pex_unit),
1090 (pex_line_num <<
1091 24) |
1092 serdes_m_phy_change->val_low_speed);
1093 }
1094 break;
1095 case SERDES_UNIT_SATA:
1096 if (line_cfg != SERDES_UNIT_SATA)
1097 break;
1098
1099
1100
1101
1102 sata_port = line_num & 1;
1103 if (bus_speed) {
1104 reg_write(SATA_BASE_REG
1105 (sata_port) |
1106 serdes_m_phy_change->reg_hi_speed,
1107 serdes_m_phy_change->val_hi_speed);
1108 DEBUG_WR_REG(SATA_BASE_REG
1109 (sata_port) |
1110 serdes_m_phy_change->reg_hi_speed,
1111 serdes_m_phy_change->val_hi_speed);
1112 } else {
1113 reg_write(SATA_BASE_REG
1114 (sata_port) |
1115 serdes_m_phy_change->reg_low_speed,
1116 serdes_m_phy_change->val_low_speed);
1117 DEBUG_WR_REG(SATA_BASE_REG
1118 (sata_port) |
1119 serdes_m_phy_change->reg_low_speed,
1120 serdes_m_phy_change->val_low_speed);
1121 }
1122 break;
1123 case SERDES_UNIT_SGMII0:
1124 case SERDES_UNIT_SGMII1:
1125 case SERDES_UNIT_SGMII2:
1126 case SERDES_UNIT_SGMII3:
1127 if (line_cfg == serdes_cfg[line_num]
1128 [SERDES_UNIT_SGMII0])
1129 sgmii_port = 0;
1130 else if (line_cfg ==
1131 serdes_cfg[line_num]
1132 [SERDES_UNIT_SGMII1])
1133 sgmii_port = 1;
1134 else if (line_cfg ==
1135 serdes_cfg[line_num]
1136 [SERDES_UNIT_SGMII2])
1137 sgmii_port = 2;
1138 else if (line_cfg ==
1139 serdes_cfg[line_num]
1140 [SERDES_UNIT_SGMII3])
1141 sgmii_port = 3;
1142 else
1143 break;
1144 if (bus_speed) {
1145 reg_write(MV_ETH_REGS_BASE
1146 (sgmii_port) |
1147 serdes_m_phy_change->reg_hi_speed,
1148 serdes_m_phy_change->val_hi_speed);
1149 DEBUG_WR_REG(MV_ETH_REGS_BASE
1150 (sgmii_port) |
1151 serdes_m_phy_change->reg_hi_speed,
1152 serdes_m_phy_change->val_hi_speed);
1153 } else {
1154 reg_write(MV_ETH_REGS_BASE
1155 (sgmii_port) |
1156 serdes_m_phy_change->reg_low_speed,
1157 serdes_m_phy_change->val_low_speed);
1158 DEBUG_WR_REG(MV_ETH_REGS_BASE
1159 (sgmii_port) |
1160 serdes_m_phy_change->reg_low_speed,
1161 serdes_m_phy_change->val_low_speed);
1162 }
1163 break;
1164 case SERDES_UNIT_QSGMII:
1165 if (line_cfg != SERDES_UNIT_QSGMII)
1166 break;
1167 if (bus_speed) {
1168 reg_write
1169 (serdes_m_phy_change->reg_hi_speed,
1170 serdes_m_phy_change->val_hi_speed);
1171 DEBUG_WR_REG
1172 (serdes_m_phy_change->reg_hi_speed,
1173 serdes_m_phy_change->val_hi_speed);
1174 } else {
1175 reg_write
1176 (serdes_m_phy_change->reg_low_speed,
1177 serdes_m_phy_change->val_low_speed);
1178 DEBUG_WR_REG
1179 (serdes_m_phy_change->reg_low_speed,
1180 serdes_m_phy_change->val_low_speed);
1181 }
1182 break;
1183 default:
1184 break;
1185 }
1186 serdes_m_phy_change++;
1187 }
1188 }
1189 }
1190
1191
1192 DEBUG_INIT_FULL_S("Steps 16: [PEX-Only] Training Enable");
1193 tmp = reg_read(SOC_CTRL_REG);
1194 DEBUG_RD_REG(SOC_CTRL_REG, tmp);
1195 tmp &= ~(0x0F);
1196 for (pex_unit = 0; pex_unit < pex_max_unit_get(); pex_unit++) {
1197 reg_write(PEX_CAUSE_REG(pex_unit), 0);
1198 DEBUG_WR_REG(PEX_CAUSE_REG(pex_unit), 0);
1199 if (info->pex_mode[pex_unit] != PEX_BUS_DISABLED)
1200 tmp |= (0x1 << pex_unit);
1201 }
1202 reg_write(SOC_CTRL_REG, tmp);
1203 DEBUG_WR_REG(SOC_CTRL_REG, tmp);
1204
1205
1206 {
1207 u32 tmp_reg, tmp_pex_reg;
1208 u32 addr;
1209 u32 first_busno, next_busno;
1210 u32 max_link_width = 0;
1211 u32 neg_link_width = 0;
1212 pex_if_num = pex_max_if_get();
1213 mdelay(150);
1214 DEBUG_INIT_FULL_C("step 17: max_if= 0x", pex_if_num, 1);
1215 next_busno = 0;
1216 for (pex_if = 0; pex_if < pex_if_num; pex_if++) {
1217 line_num = (pex_if <= 8) ? pex_if : 12;
1218 line_cfg = get_line_cfg(line_num, info);
1219 if (line_cfg != serdes_cfg[line_num][SERDES_UNIT_PEX])
1220 continue;
1221 pex_unit = (pex_if < 9) ? (pex_if >> 2) : 3;
1222 DEBUG_INIT_FULL_S("step 17: PEX");
1223 DEBUG_INIT_FULL_D(pex_if, 1);
1224 DEBUG_INIT_FULL_C(" pex_unit= ", pex_unit, 1);
1225
1226 if (info->pex_mode[pex_unit] == PEX_BUS_DISABLED) {
1227 DEBUG_INIT_FULL_C("PEX disabled interface ",
1228 pex_if, 1);
1229 if (pex_if < 8)
1230 pex_if += 3;
1231 continue;
1232 }
1233 first_busno = next_busno;
1234 if ((info->pex_type == MV_PEX_END_POINT) &&
1235 (0 == pex_if)) {
1236 if ((pex_if < 8) && (info->pex_mode[pex_unit] ==
1237 PEX_BUS_MODE_X4))
1238 pex_if += 3;
1239 continue;
1240 }
1241
1242 tmp = reg_read(PEX_DBG_STATUS_REG(pex_if));
1243 DEBUG_RD_REG(PEX_DBG_STATUS_REG(pex_if), tmp);
1244 if ((tmp & 0x7f) == 0x7e) {
1245 next_busno++;
1246 tmp = reg_read(PEX_LINK_CAPABILITIES_REG(pex_if));
1247 max_link_width = tmp;
1248 DEBUG_RD_REG((PEX_LINK_CAPABILITIES_REG
1249 (pex_if)), tmp);
1250 max_link_width = ((max_link_width >> 4) & 0x3F);
1251 neg_link_width =
1252 reg_read(PEX_LINK_CTRL_STATUS_REG(pex_if));
1253 DEBUG_RD_REG((PEX_LINK_CTRL_STATUS_REG(pex_if)),
1254 neg_link_width);
1255 neg_link_width = ((neg_link_width >> 20) & 0x3F);
1256 if (max_link_width > neg_link_width) {
1257 tmp &= ~(0x3F << 4);
1258 tmp |= (neg_link_width << 4);
1259 reg_write(PEX_LINK_CAPABILITIES_REG
1260 (pex_if), tmp);
1261 DEBUG_WR_REG((PEX_LINK_CAPABILITIES_REG
1262 (pex_if)), tmp);
1263 mdelay(1);
1264 DEBUG_INIT_S("PEX");
1265 DEBUG_INIT_D(pex_if, 1);
1266 DEBUG_INIT_C(": change width to X",
1267 neg_link_width, 1);
1268 }
1269 tmp_pex_reg =
1270 reg_read((PEX_CFG_DIRECT_ACCESS
1271 (pex_if,
1272 PEX_LINK_CAPABILITY_REG)));
1273 DEBUG_RD_REG((PEX_CFG_DIRECT_ACCESS
1274 (pex_if,
1275 PEX_LINK_CAPABILITY_REG)),
1276 tmp_pex_reg);
1277 tmp_pex_reg &= (0xF);
1278 if (tmp_pex_reg == 0x2) {
1279 tmp_reg =
1280 (reg_read
1281 (PEX_CFG_DIRECT_ACCESS
1282 (pex_if,
1283 PEX_LINK_CTRL_STAT_REG)) &
1284 0xF0000) >> 16;
1285 DEBUG_RD_REG(PEX_CFG_DIRECT_ACCESS
1286 (pex_if,
1287 PEX_LINK_CTRL_STAT_REG),
1288 tmp_pex_reg);
1289
1290 if (tmp_reg == 0x1) {
1291 pex_local_bus_num_set(pex_if,
1292 first_busno);
1293 pex_local_dev_num_set(pex_if,
1294 1);
1295
1296 DEBUG_INIT_FULL_S("** Link is Gen1, check the EP capability\n");
1297
1298 addr =
1299 pex_cfg_read(pex_if,
1300 first_busno, 0,
1301 0,
1302 0x34) & 0xFF;
1303 DEBUG_INIT_FULL_C("pex_cfg_read: return addr=0x%x",
1304 addr, 4);
1305 if (addr == 0xff) {
1306 DEBUG_INIT_FULL_C("pex_cfg_read: return 0xff -->PEX (%d): Detected No Link.",
1307 pex_if, 1);
1308 continue;
1309 }
1310 while ((pex_cfg_read
1311 (pex_if, first_busno, 0,
1312 0,
1313 addr) & 0xFF) !=
1314 0x10) {
1315 addr =
1316 (pex_cfg_read
1317 (pex_if,
1318 first_busno, 0, 0,
1319 addr) & 0xFF00) >>
1320 8;
1321 }
1322 if ((pex_cfg_read
1323 (pex_if, first_busno, 0, 0,
1324 addr + 0xC) & 0xF) >=
1325 0x2) {
1326 tmp =
1327 reg_read
1328 (PEX_LINK_CTRL_STATUS2_REG
1329 (pex_if));
1330 DEBUG_RD_REG
1331 (PEX_LINK_CTRL_STATUS2_REG
1332 (pex_if), tmp);
1333 tmp &= ~(0x1 | 1 << 1);
1334 tmp |= (1 << 1);
1335 reg_write
1336 (PEX_LINK_CTRL_STATUS2_REG
1337 (pex_if), tmp);
1338 DEBUG_WR_REG
1339 (PEX_LINK_CTRL_STATUS2_REG
1340 (pex_if), tmp);
1341
1342 tmp =
1343 reg_read
1344 (PEX_CTRL_REG
1345 (pex_if));
1346 DEBUG_RD_REG
1347 (PEX_CTRL_REG
1348 (pex_if), tmp);
1349 tmp |= (1 << 10);
1350 reg_write(PEX_CTRL_REG
1351 (pex_if),
1352 tmp);
1353 DEBUG_WR_REG
1354 (PEX_CTRL_REG
1355 (pex_if), tmp);
1356 mdelay(10);
1357 DEBUG_INIT_FULL_S
1358 ("Gen2 client!\n");
1359 } else {
1360 DEBUG_INIT_FULL_S
1361 ("GEN1 client!\n");
1362 }
1363 }
1364 }
1365 } else {
1366 DEBUG_INIT_FULL_S("PEX");
1367 DEBUG_INIT_FULL_D(pex_if, 1);
1368 DEBUG_INIT_FULL_S(" : Detected No Link. Status Reg(0x");
1369 DEBUG_INIT_FULL_D(PEX_DBG_STATUS_REG(pex_if),
1370 8);
1371 DEBUG_INIT_FULL_C(") = 0x", tmp, 8);
1372 }
1373
1374 if ((pex_if < 8) &&
1375 (info->pex_mode[pex_unit] == PEX_BUS_MODE_X4))
1376 pex_if += 3;
1377 }
1378 }
1379
1380
1381 {
1382 u32 devId;
1383 pex_if_num = pex_max_if_get();
1384 ctrl_mode = ctrl_model_get();
1385 for (pex_if = 0; pex_if < pex_if_num; pex_if++) {
1386 pex_unit = (pex_if < 9) ? (pex_if >> 2) : 3;
1387 if (info->pex_mode[pex_unit] == PEX_BUS_DISABLED) {
1388 if ((pex_if < 8) &&
1389 (info->pex_mode[pex_unit] == PEX_BUS_MODE_X4))
1390 pex_if += 3;
1391 continue;
1392 }
1393
1394 devId = reg_read(PEX_CFG_DIRECT_ACCESS(
1395 pex_if, PEX_DEVICE_AND_VENDOR_ID));
1396 devId &= 0xFFFF;
1397 devId |= ((ctrl_mode << 16) & 0xffff0000);
1398 DEBUG_INIT_FULL_S("Update Device ID PEX");
1399 DEBUG_INIT_FULL_D(pex_if, 1);
1400 DEBUG_INIT_FULL_D(devId, 8);
1401 DEBUG_INIT_FULL_S("\n");
1402 reg_write(PEX_CFG_DIRECT_ACCESS
1403 (pex_if, PEX_DEVICE_AND_VENDOR_ID), devId);
1404 if ((pex_if < 8) &&
1405 (info->pex_mode[pex_unit] == PEX_BUS_MODE_X4))
1406 pex_if += 3;
1407 }
1408 DEBUG_INIT_FULL_S("Update PEX Device ID 0x");
1409 DEBUG_INIT_FULL_D(ctrl_mode, 4);
1410 DEBUG_INIT_FULL_S("0\n");
1411 }
1412 tmp = reg_read(PEX_DBG_STATUS_REG(0));
1413 DEBUG_RD_REG(PEX_DBG_STATUS_REG(0), tmp);
1414
1415 DEBUG_INIT_S(ENDED_OK);
1416 return MV_OK;
1417}
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445u32 pex_cfg_read(u32 pex_if, u32 bus, u32 dev, u32 func, u32 offs)
1446{
1447 u32 pex_data = 0;
1448 u32 local_dev, local_bus;
1449 u32 val;
1450
1451 if (pex_if >= MV_PEX_MAX_IF)
1452 return 0xFFFFFFFF;
1453
1454 if (dev >= MAX_PEX_DEVICES) {
1455 DEBUG_INIT_C("pex_cfg_read: ERR. device number illigal ", dev,
1456 1);
1457 return 0xFFFFFFFF;
1458 }
1459
1460 if (func >= MAX_PEX_FUNCS) {
1461 DEBUG_INIT_C("pex_cfg_read: ERR. function num illigal ", func,
1462 1);
1463 return 0xFFFFFFFF;
1464 }
1465
1466 if (bus >= MAX_PEX_BUSSES) {
1467 DEBUG_INIT_C("pex_cfg_read: ERR. bus number illigal ", bus, 1);
1468 return MV_ERROR;
1469 }
1470 val = reg_read(PEX_STATUS_REG(pex_if));
1471
1472 local_dev =
1473 ((val & PXSR_PEX_DEV_NUM_MASK) >> PXSR_PEX_DEV_NUM_OFFS);
1474 local_bus =
1475 ((val & PXSR_PEX_BUS_NUM_MASK) >> PXSR_PEX_BUS_NUM_OFFS);
1476
1477
1478 if ((dev != local_dev) || (bus != local_bus)) {
1479 pex_data = reg_read(PEX_STATUS_REG(pex_if));
1480
1481 if ((pex_data & PXSR_DL_DOWN))
1482 return MV_ERROR;
1483 }
1484
1485
1486
1487
1488
1489
1490 if (bus == local_bus) {
1491 if (local_dev == 0) {
1492
1493
1494
1495
1496 if ((dev != 1) && (dev != local_dev))
1497 return MV_ERROR;
1498 } else {
1499
1500
1501
1502
1503 if ((dev != 0) && (dev != local_dev))
1504 return MV_ERROR;
1505 }
1506 }
1507
1508
1509 pex_data = (bus << PXCAR_BUS_NUM_OFFS);
1510 pex_data |= (dev << PXCAR_DEVICE_NUM_OFFS);
1511 pex_data |= (func << PXCAR_FUNC_NUM_OFFS);
1512 pex_data |= (offs & PXCAR_REG_NUM_MASK);
1513
1514 pex_data |= (((offs & PXCAR_REAL_EXT_REG_NUM_MASK) >>
1515 PXCAR_REAL_EXT_REG_NUM_OFFS) << PXCAR_EXT_REG_NUM_OFFS);
1516
1517 pex_data |= PXCAR_CONFIG_EN;
1518
1519
1520 reg_write(PEX_CFG_ADDR_REG(pex_if), pex_data);
1521
1522
1523
1524
1525
1526 if (pex_data != reg_read(PEX_CFG_ADDR_REG(pex_if)))
1527 return MV_ERROR;
1528
1529
1530 reg_bit_set(PEX_CFG_DIRECT_ACCESS(pex_if, PEX_STATUS_AND_COMMAND),
1531 PXSAC_MABORT);
1532
1533 pex_data = reg_read(PEX_CFG_DATA_REG(pex_if));
1534
1535 DEBUG_INIT_FULL_C(" --> ", pex_data, 4);
1536
1537 return pex_data;
1538}
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560int pex_local_bus_num_set(u32 pex_if, u32 bus_num)
1561{
1562 u32 val;
1563
1564 if (bus_num >= MAX_PEX_BUSSES) {
1565 DEBUG_INIT_C("pex_local_bus_num_set: ERR. bus number illigal %d\n",
1566 bus_num, 4);
1567 return MV_ERROR;
1568 }
1569
1570 val = reg_read(PEX_STATUS_REG(pex_if));
1571 val &= ~PXSR_PEX_BUS_NUM_MASK;
1572 val |= (bus_num << PXSR_PEX_BUS_NUM_OFFS) & PXSR_PEX_BUS_NUM_MASK;
1573 reg_write(PEX_STATUS_REG(pex_if), val);
1574
1575 return MV_OK;
1576}
1577
1578
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598int pex_local_dev_num_set(u32 pex_if, u32 dev_num)
1599{
1600 u32 val;
1601
1602 if (pex_if >= MV_PEX_MAX_IF)
1603 return MV_BAD_PARAM;
1604
1605 val = reg_read(PEX_STATUS_REG(pex_if));
1606 val &= ~PXSR_PEX_DEV_NUM_MASK;
1607 val |= (dev_num << PXSR_PEX_DEV_NUM_OFFS) & PXSR_PEX_DEV_NUM_MASK;
1608 reg_write(PEX_STATUS_REG(pex_if), val);
1609
1610 return MV_OK;
1611}
1612
