1
2
3
4
5
6
7
8
9#include <common.h>
10#include <env.h>
11#include <init.h>
12#include <net.h>
13#include <asm/arch/clock.h>
14#include <asm/arch/crm_regs.h>
15#include <asm/arch/iomux.h>
16#include <asm/arch/imx-regs.h>
17#include <asm/arch/mx6-pins.h>
18#include <asm/arch/sys_proto.h>
19#include <asm/global_data.h>
20#include <asm/gpio.h>
21#include <asm/arch/mxc_hdmi.h>
22#include <asm/mach-imx/video.h>
23#include <asm/mach-imx/iomux-v3.h>
24#include <asm/io.h>
25#include <linux/delay.h>
26#include <linux/sizes.h>
27#include <miiphy.h>
28#include <netdev.h>
29#include <phy.h>
30
31DECLARE_GLOBAL_DATA_PTR;
32
33#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
34 PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
35 PAD_CTL_SRE_FAST | PAD_CTL_HYS)
36
37#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
38 PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
39
40#define ETH_PHY_RESET IMX_GPIO_NR(1, 26)
41#define LVDS0_EN IMX_GPIO_NR(2, 8)
42#define LVDS0_BL_EN IMX_GPIO_NR(2, 9)
43
44int dram_init(void)
45{
46 gd->ram_size = imx_ddr_size();
47
48 return 0;
49}
50
51static iomux_v3_cfg_t const uart1_pads[] = {
52 IOMUX_PADS(PAD_CSI0_DAT10__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
53 IOMUX_PADS(PAD_CSI0_DAT11__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
54};
55
56static void setup_iomux_uart(void)
57{
58 SETUP_IOMUX_PADS(uart1_pads);
59}
60
61static iomux_v3_cfg_t const lvds_pads[] = {
62
63 IOMUX_PADS(PAD_SD4_DAT0__GPIO2_IO08 | MUX_PAD_CTRL(NO_PAD_CTRL)),
64 IOMUX_PADS(PAD_SD4_DAT1__GPIO2_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL)),
65 IOMUX_PADS(PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)),
66 IOMUX_PADS(PAD_DI0_PIN2__IPU1_DI0_PIN02 | MUX_PAD_CTRL(NO_PAD_CTRL)),
67 IOMUX_PADS(PAD_DI0_PIN3__IPU1_DI0_PIN03 | MUX_PAD_CTRL(NO_PAD_CTRL)),
68};
69
70static iomux_v3_cfg_t const enet_pads[] = {
71 IOMUX_PADS(PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL)),
72 IOMUX_PADS(PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
73 IOMUX_PADS(PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
74 IOMUX_PADS(PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
75 IOMUX_PADS(PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
76 IOMUX_PADS(PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
77 IOMUX_PADS(PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
78 IOMUX_PADS(PAD_RGMII_TX_CTL__RGMII_TX_CTL |
79 MUX_PAD_CTRL(ENET_PAD_CTRL)),
80 IOMUX_PADS(PAD_ENET_REF_CLK__ENET_TX_CLK |
81 MUX_PAD_CTRL(ENET_PAD_CTRL)),
82 IOMUX_PADS(PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
83 IOMUX_PADS(PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
84 IOMUX_PADS(PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
85 IOMUX_PADS(PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
86 IOMUX_PADS(PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
87 IOMUX_PADS(PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL)),
88
89 IOMUX_PADS(PAD_ENET_RXD1__GPIO1_IO26 | MUX_PAD_CTRL(NO_PAD_CTRL)),
90};
91
92static void setup_iomux_enet(void)
93{
94 SETUP_IOMUX_PADS(enet_pads);
95
96
97 gpio_request(ETH_PHY_RESET, "enet_phy_reset");
98 gpio_direction_output(ETH_PHY_RESET, 0);
99 udelay(500);
100 gpio_set_value(ETH_PHY_RESET, 1);
101}
102
103#if defined(CONFIG_VIDEO_IPUV3)
104static iomux_v3_cfg_t const ft5x06_wvga_pads[] = {
105 IOMUX_PADS(PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK),
106 IOMUX_PADS(PAD_DI0_PIN2__IPU1_DI0_PIN02),
107 IOMUX_PADS(PAD_DI0_PIN3__IPU1_DI0_PIN03),
108 IOMUX_PADS(PAD_DI0_PIN4__IPU1_DI0_PIN04 | MUX_PAD_CTRL(PAD_CTL_DSE_120ohm)),
109 IOMUX_PADS(PAD_DI0_PIN15__IPU1_DI0_PIN15),
110 IOMUX_PADS(PAD_DISP0_DAT0__IPU1_DISP0_DATA00),
111 IOMUX_PADS(PAD_DISP0_DAT1__IPU1_DISP0_DATA01),
112 IOMUX_PADS(PAD_DISP0_DAT2__IPU1_DISP0_DATA02),
113 IOMUX_PADS(PAD_DISP0_DAT3__IPU1_DISP0_DATA03),
114 IOMUX_PADS(PAD_DISP0_DAT4__IPU1_DISP0_DATA04),
115 IOMUX_PADS(PAD_DISP0_DAT5__IPU1_DISP0_DATA05),
116 IOMUX_PADS(PAD_DISP0_DAT6__IPU1_DISP0_DATA06),
117 IOMUX_PADS(PAD_DISP0_DAT7__IPU1_DISP0_DATA07),
118 IOMUX_PADS(PAD_DISP0_DAT8__IPU1_DISP0_DATA08),
119 IOMUX_PADS(PAD_DISP0_DAT9__IPU1_DISP0_DATA09),
120 IOMUX_PADS(PAD_DISP0_DAT10__IPU1_DISP0_DATA10),
121 IOMUX_PADS(PAD_DISP0_DAT11__IPU1_DISP0_DATA11),
122 IOMUX_PADS(PAD_DISP0_DAT12__IPU1_DISP0_DATA12),
123 IOMUX_PADS(PAD_DISP0_DAT13__IPU1_DISP0_DATA13),
124 IOMUX_PADS(PAD_DISP0_DAT14__IPU1_DISP0_DATA14),
125 IOMUX_PADS(PAD_DISP0_DAT15__IPU1_DISP0_DATA15),
126 IOMUX_PADS(PAD_DISP0_DAT16__IPU1_DISP0_DATA16),
127 IOMUX_PADS(PAD_DISP0_DAT17__IPU1_DISP0_DATA17),
128 IOMUX_PADS(PAD_DISP0_DAT18__IPU1_DISP0_DATA18),
129 IOMUX_PADS(PAD_DISP0_DAT19__IPU1_DISP0_DATA19),
130 IOMUX_PADS(PAD_DISP0_DAT20__IPU1_DISP0_DATA20),
131 IOMUX_PADS(PAD_DISP0_DAT21__IPU1_DISP0_DATA21),
132 IOMUX_PADS(PAD_DISP0_DAT22__IPU1_DISP0_DATA22),
133 IOMUX_PADS(PAD_DISP0_DAT23__IPU1_DISP0_DATA23),
134 IOMUX_PADS(PAD_SD4_DAT2__GPIO2_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL)),
135 IOMUX_PADS(PAD_SD4_DAT3__GPIO2_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL)),
136};
137
138static void do_enable_hdmi(struct display_info_t const *dev)
139{
140 imx_enable_hdmi_phy();
141}
142
143static void enable_lvds(struct display_info_t const *dev)
144{
145 struct iomuxc *iomux = (struct iomuxc *)
146 IOMUXC_BASE_ADDR;
147
148
149 u32 reg = readl(&iomux->gpr[2]);
150 reg |= IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT;
151 writel(reg, &iomux->gpr[2]);
152
153
154 SETUP_IOMUX_PAD(PAD_SD4_DAT1__GPIO2_IO09);
155 gpio_request(IMX_GPIO_NR(2, 9), "backlight_enable");
156 gpio_direction_output(IMX_GPIO_NR(2, 9), 1);
157
158 gpio_request(IMX_GPIO_NR(2, 8), "brightness");
159 SETUP_IOMUX_PAD(PAD_SD4_DAT0__GPIO2_IO08);
160 gpio_direction_output(IMX_GPIO_NR(2, 8), 1);
161}
162
163static void enable_ft5x06_wvga(struct display_info_t const *dev)
164{
165 SETUP_IOMUX_PADS(ft5x06_wvga_pads);
166
167 gpio_request(IMX_GPIO_NR(2, 10), "parallel_enable");
168 gpio_request(IMX_GPIO_NR(2, 11), "parallel_brightness");
169 gpio_direction_output(IMX_GPIO_NR(2, 10), 1);
170 gpio_direction_output(IMX_GPIO_NR(2, 11), 1);
171}
172
173struct display_info_t const displays[] = {{
174 .bus = 1,
175 .addr = 0x38,
176 .pixfmt = IPU_PIX_FMT_RGB24,
177 .detect = NULL,
178 .enable = enable_ft5x06_wvga,
179 .mode = {
180 .name = "FT5x06-WVGA",
181 .refresh = 60,
182 .xres = 800,
183 .yres = 480,
184 .pixclock = 30303,
185 .left_margin = 45,
186 .right_margin = 210,
187 .upper_margin = 22,
188 .lower_margin = 22,
189 .hsync_len = 1,
190 .vsync_len = 1,
191 .sync = 0,
192 .vmode = FB_VMODE_NONINTERLACED
193} }, {
194 .bus = -1,
195 .addr = 0,
196 .pixfmt = IPU_PIX_FMT_RGB24,
197 .detect = NULL,
198 .enable = enable_lvds,
199 .mode = {
200 .name = "hj070na",
201 .refresh = 60,
202 .xres = 1024,
203 .yres = 600,
204 .pixclock = 15385,
205 .left_margin = 220,
206 .right_margin = 40,
207 .upper_margin = 21,
208 .lower_margin = 7,
209 .hsync_len = 60,
210 .vsync_len = 10,
211 .sync = FB_SYNC_EXT,
212 .vmode = FB_VMODE_NONINTERLACED
213} }, {
214 .bus = -1,
215 .addr = 0,
216 .pixfmt = IPU_PIX_FMT_RGB24,
217 .detect = detect_hdmi,
218 .enable = do_enable_hdmi,
219 .mode = {
220 .name = "HDMI",
221 .refresh = 60,
222 .xres = 1024,
223 .yres = 768,
224 .pixclock = 15385,
225 .left_margin = 220,
226 .right_margin = 40,
227 .upper_margin = 21,
228 .lower_margin = 7,
229 .hsync_len = 60,
230 .vsync_len = 10,
231 .sync = FB_SYNC_EXT,
232 .vmode = FB_VMODE_NONINTERLACED
233} } };
234size_t display_count = ARRAY_SIZE(displays);
235
236static void setup_display(void)
237{
238 struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
239 struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
240 int reg;
241
242
243 SETUP_IOMUX_PADS(lvds_pads);
244 gpio_request(LVDS0_EN, "lvds0_enable");
245 gpio_request(LVDS0_BL_EN, "lvds0_bl_enable");
246 gpio_direction_output(LVDS0_EN, 1);
247 gpio_direction_output(LVDS0_BL_EN, 1);
248
249 enable_ipu_clock();
250 imx_setup_hdmi();
251
252 reg = __raw_readl(&mxc_ccm->CCGR3);
253 reg |= MXC_CCM_CCGR3_LDB_DI0_MASK | MXC_CCM_CCGR3_LDB_DI1_MASK;
254 writel(reg, &mxc_ccm->CCGR3);
255
256
257 reg = readl(&mxc_ccm->cs2cdr);
258 reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK
259 | MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK);
260 reg |= (3 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET)
261 | (3 << MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET);
262 writel(reg, &mxc_ccm->cs2cdr);
263
264 reg = readl(&mxc_ccm->cscmr2);
265 reg |= MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV | MXC_CCM_CSCMR2_LDB_DI1_IPU_DIV;
266 writel(reg, &mxc_ccm->cscmr2);
267
268 reg = readl(&mxc_ccm->chsccdr);
269 reg |= (CHSCCDR_CLK_SEL_LDB_DI0
270 << MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET);
271 reg |= (CHSCCDR_CLK_SEL_LDB_DI0
272 << MXC_CCM_CHSCCDR_IPU1_DI1_CLK_SEL_OFFSET);
273 writel(reg, &mxc_ccm->chsccdr);
274
275 reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES
276 | IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_LOW
277 | IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW
278 | IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG
279 | IOMUXC_GPR2_DATA_WIDTH_CH1_24BIT
280 | IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG
281 | IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT
282 | IOMUXC_GPR2_LVDS_CH1_MODE_ENABLED_DI0
283 | IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0;
284 writel(reg, &iomux->gpr[2]);
285 reg = readl(&iomux->gpr[3]);
286
287 reg = (reg & ~(IOMUXC_GPR3_LVDS0_MUX_CTL_MASK
288 | IOMUXC_GPR3_HDMI_MUX_CTL_MASK))
289 | (IOMUXC_GPR3_MUX_SRC_IPU1_DI0
290 << IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET);
291
292 writel(reg, &iomux->gpr[3]);
293}
294#endif
295
296int board_early_init_f(void)
297{
298 setup_iomux_uart();
299
300#if defined(CONFIG_VIDEO_IPUV3)
301 setup_display();
302#endif
303
304 return 0;
305}
306
307int board_eth_init(struct bd_info *bis)
308{
309 setup_iomux_enet();
310
311 return cpu_eth_init(bis);
312}
313
314int board_phy_config(struct phy_device *phydev)
315{
316 unsigned short val;
317
318
319 phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x7);
320 phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x8016);
321 phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x4007);
322
323 val = phy_read(phydev, MDIO_DEVAD_NONE, 0xe);
324 val &= 0xffe7;
325 val |= 0x18;
326 phy_write(phydev, MDIO_DEVAD_NONE, 0xe, val);
327
328
329 phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x5);
330 val = phy_read(phydev, MDIO_DEVAD_NONE, 0x1e);
331 val |= 0x0100;
332 phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, val);
333
334 if (phydev->drv->config)
335 phydev->drv->config(phydev);
336
337 return 0;
338}
339
340int overwrite_console(void)
341{
342 return 1;
343}
344
345int board_late_init(void)
346{
347 if (is_mx6dq())
348 env_set("board_rev", "MX6Q");
349 else
350 env_set("board_rev", "MX6DL");
351
352 return 0;
353}
354
355int board_init(void)
356{
357 gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
358
359 return 0;
360}
361
362int checkboard(void)
363{
364 puts("Board: PICO-IMX6\n");
365
366 return 0;
367}
368
