uboot/common/cli_hush.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0+
   2/*
   3 * sh.c -- a prototype Bourne shell grammar parser
   4 *      Intended to follow the original Thompson and Ritchie
   5 *      "small and simple is beautiful" philosophy, which
   6 *      incidentally is a good match to today's BusyBox.
   7 *
   8 * Copyright (C) 2000,2001  Larry Doolittle  <larry@doolittle.boa.org>
   9 *
  10 * Credits:
  11 *      The parser routines proper are all original material, first
  12 *      written Dec 2000 and Jan 2001 by Larry Doolittle.
  13 *      The execution engine, the builtins, and much of the underlying
  14 *      support has been adapted from busybox-0.49pre's lash,
  15 *      which is Copyright (C) 2000 by Lineo, Inc., and
  16 *      written by Erik Andersen <andersen@lineo.com>, <andersee@debian.org>.
  17 *      That, in turn, is based in part on ladsh.c, by Michael K. Johnson and
  18 *      Erik W. Troan, which they placed in the public domain.  I don't know
  19 *      how much of the Johnson/Troan code has survived the repeated rewrites.
  20 * Other credits:
  21 *      b_addchr() derived from similar w_addchar function in glibc-2.2
  22 *      setup_redirect(), redirect_opt_num(), and big chunks of main()
  23 *        and many builtins derived from contributions by Erik Andersen
  24 *      miscellaneous bugfixes from Matt Kraai
  25 *
  26 * There are two big (and related) architecture differences between
  27 * this parser and the lash parser.  One is that this version is
  28 * actually designed from the ground up to understand nearly all
  29 * of the Bourne grammar.  The second, consequential change is that
  30 * the parser and input reader have been turned inside out.  Now,
  31 * the parser is in control, and asks for input as needed.  The old
  32 * way had the input reader in control, and it asked for parsing to
  33 * take place as needed.  The new way makes it much easier to properly
  34 * handle the recursion implicit in the various substitutions, especially
  35 * across continuation lines.
  36 *
  37 * Bash grammar not implemented: (how many of these were in original sh?)
  38 *      $@ (those sure look like weird quoting rules)
  39 *      $_
  40 *      ! negation operator for pipes
  41 *      &> and >& redirection of stdout+stderr
  42 *      Brace Expansion
  43 *      Tilde Expansion
  44 *      fancy forms of Parameter Expansion
  45 *      aliases
  46 *      Arithmetic Expansion
  47 *      <(list) and >(list) Process Substitution
  48 *      reserved words: case, esac, select, function
  49 *      Here Documents ( << word )
  50 *      Functions
  51 * Major bugs:
  52 *      job handling woefully incomplete and buggy
  53 *      reserved word execution woefully incomplete and buggy
  54 * to-do:
  55 *      port selected bugfixes from post-0.49 busybox lash - done?
  56 *      finish implementing reserved words: for, while, until, do, done
  57 *      change { and } from special chars to reserved words
  58 *      builtins: break, continue, eval, return, set, trap, ulimit
  59 *      test magic exec
  60 *      handle children going into background
  61 *      clean up recognition of null pipes
  62 *      check setting of global_argc and global_argv
  63 *      control-C handling, probably with longjmp
  64 *      follow IFS rules more precisely, including update semantics
  65 *      figure out what to do with backslash-newline
  66 *      explain why we use signal instead of sigaction
  67 *      propagate syntax errors, die on resource errors?
  68 *      continuation lines, both explicit and implicit - done?
  69 *      memory leak finding and plugging - done?
  70 *      more testing, especially quoting rules and redirection
  71 *      document how quoting rules not precisely followed for variable assignments
  72 *      maybe change map[] to use 2-bit entries
  73 *      (eventually) remove all the printf's
  74 */
  75
  76#define __U_BOOT__
  77#ifdef __U_BOOT__
  78#include <common.h>         /* readline */
  79#include <env.h>
  80#include <malloc.h>         /* malloc, free, realloc*/
  81#include <linux/ctype.h>    /* isalpha, isdigit */
  82#include <console.h>
  83#include <bootretry.h>
  84#include <cli.h>
  85#include <cli_hush.h>
  86#include <command.h>        /* find_cmd */
  87#include <asm/global_data.h>
  88#endif
  89#ifndef __U_BOOT__
  90#include <ctype.h>     /* isalpha, isdigit */
  91#include <unistd.h>    /* getpid */
  92#include <stdlib.h>    /* getenv, atoi */
  93#include <string.h>    /* strchr */
  94#include <stdio.h>     /* popen etc. */
  95#include <glob.h>      /* glob, of course */
  96#include <stdarg.h>    /* va_list */
  97#include <errno.h>
  98#include <fcntl.h>
  99#include <getopt.h>    /* should be pretty obvious */
 100
 101#include <sys/stat.h>  /* ulimit */
 102#include <sys/types.h>
 103#include <sys/wait.h>
 104#include <signal.h>
 105
 106/* #include <dmalloc.h> */
 107
 108#if 1
 109#include "busybox.h"
 110#include "cmdedit.h"
 111#else
 112#define applet_name "hush"
 113#include "standalone.h"
 114#define hush_main main
 115#undef CONFIG_FEATURE_SH_FANCY_PROMPT
 116#define BB_BANNER
 117#endif
 118#endif
 119#define SPECIAL_VAR_SYMBOL 03
 120#define SUBSTED_VAR_SYMBOL 04
 121#ifndef __U_BOOT__
 122#define FLAG_EXIT_FROM_LOOP 1
 123#define FLAG_PARSE_SEMICOLON (1 << 1)           /* symbol ';' is special for parser */
 124#define FLAG_REPARSING       (1 << 2)           /* >= 2nd pass */
 125
 126#endif
 127
 128#ifdef __U_BOOT__
 129DECLARE_GLOBAL_DATA_PTR;
 130
 131#define EXIT_SUCCESS 0
 132#define EOF -1
 133#define syntax() syntax_err()
 134#define xstrdup strdup
 135#define error_msg printf
 136#else
 137typedef enum {
 138        REDIRECT_INPUT     = 1,
 139        REDIRECT_OVERWRITE = 2,
 140        REDIRECT_APPEND    = 3,
 141        REDIRECT_HEREIS    = 4,
 142        REDIRECT_IO        = 5
 143} redir_type;
 144
 145/* The descrip member of this structure is only used to make debugging
 146 * output pretty */
 147struct {int mode; int default_fd; char *descrip;} redir_table[] = {
 148        { 0,                         0, "()" },
 149        { O_RDONLY,                  0, "<"  },
 150        { O_CREAT|O_TRUNC|O_WRONLY,  1, ">"  },
 151        { O_CREAT|O_APPEND|O_WRONLY, 1, ">>" },
 152        { O_RDONLY,                 -1, "<<" },
 153        { O_RDWR,                    1, "<>" }
 154};
 155#endif
 156
 157typedef enum {
 158        PIPE_SEQ = 1,
 159        PIPE_AND = 2,
 160        PIPE_OR  = 3,
 161        PIPE_BG  = 4,
 162} pipe_style;
 163
 164/* might eventually control execution */
 165typedef enum {
 166        RES_NONE  = 0,
 167        RES_IF    = 1,
 168        RES_THEN  = 2,
 169        RES_ELIF  = 3,
 170        RES_ELSE  = 4,
 171        RES_FI    = 5,
 172        RES_FOR   = 6,
 173        RES_WHILE = 7,
 174        RES_UNTIL = 8,
 175        RES_DO    = 9,
 176        RES_DONE  = 10,
 177        RES_XXXX  = 11,
 178        RES_IN    = 12,
 179        RES_SNTX  = 13
 180} reserved_style;
 181#define FLAG_END   (1<<RES_NONE)
 182#define FLAG_IF    (1<<RES_IF)
 183#define FLAG_THEN  (1<<RES_THEN)
 184#define FLAG_ELIF  (1<<RES_ELIF)
 185#define FLAG_ELSE  (1<<RES_ELSE)
 186#define FLAG_FI    (1<<RES_FI)
 187#define FLAG_FOR   (1<<RES_FOR)
 188#define FLAG_WHILE (1<<RES_WHILE)
 189#define FLAG_UNTIL (1<<RES_UNTIL)
 190#define FLAG_DO    (1<<RES_DO)
 191#define FLAG_DONE  (1<<RES_DONE)
 192#define FLAG_IN    (1<<RES_IN)
 193#define FLAG_START (1<<RES_XXXX)
 194
 195/* This holds pointers to the various results of parsing */
 196struct p_context {
 197        struct child_prog *child;
 198        struct pipe *list_head;
 199        struct pipe *pipe;
 200#ifndef __U_BOOT__
 201        struct redir_struct *pending_redirect;
 202#endif
 203        reserved_style w;
 204        int old_flag;                           /* for figuring out valid reserved words */
 205        struct p_context *stack;
 206        int type;                       /* define type of parser : ";$" common or special symbol */
 207        /* How about quoting status? */
 208};
 209
 210#ifndef __U_BOOT__
 211struct redir_struct {
 212        redir_type type;                        /* type of redirection */
 213        int fd;                                         /* file descriptor being redirected */
 214        int dup;                                        /* -1, or file descriptor being duplicated */
 215        struct redir_struct *next;      /* pointer to the next redirect in the list */
 216        glob_t word;                            /* *word.gl_pathv is the filename */
 217};
 218#endif
 219
 220struct child_prog {
 221#ifndef __U_BOOT__
 222        pid_t pid;                                      /* 0 if exited */
 223#endif
 224        char **argv;                            /* program name and arguments */
 225        /* was quoted when parsed; copy of struct o_string.nonnull field */
 226        int *argv_nonnull;
 227#ifdef __U_BOOT__
 228        int    argc;                            /* number of program arguments */
 229#endif
 230        struct pipe *group;                     /* if non-NULL, first in group or subshell */
 231#ifndef __U_BOOT__
 232        int subshell;                           /* flag, non-zero if group must be forked */
 233        struct redir_struct *redirects; /* I/O redirections */
 234        glob_t glob_result;                     /* result of parameter globbing */
 235        int is_stopped;                         /* is the program currently running? */
 236        struct pipe *family;            /* pointer back to the child's parent pipe */
 237#endif
 238        int sp;                         /* number of SPECIAL_VAR_SYMBOL */
 239        int type;
 240};
 241
 242struct pipe {
 243#ifndef __U_BOOT__
 244        int jobid;                                      /* job number */
 245#endif
 246        int num_progs;                          /* total number of programs in job */
 247#ifndef __U_BOOT__
 248        int running_progs;                      /* number of programs running */
 249        char *text;                                     /* name of job */
 250        char *cmdbuf;                           /* buffer various argv's point into */
 251        pid_t pgrp;                                     /* process group ID for the job */
 252#endif
 253        struct child_prog *progs;       /* array of commands in pipe */
 254        struct pipe *next;                      /* to track background commands */
 255#ifndef __U_BOOT__
 256        int stopped_progs;                      /* number of programs alive, but stopped */
 257        int job_context;                        /* bitmask defining current context */
 258#endif
 259        pipe_style followup;            /* PIPE_BG, PIPE_SEQ, PIPE_OR, PIPE_AND */
 260        reserved_style r_mode;          /* supports if, for, while, until */
 261};
 262
 263#ifndef __U_BOOT__
 264struct close_me {
 265        int fd;
 266        struct close_me *next;
 267};
 268#endif
 269
 270struct variables {
 271        char *name;
 272        char *value;
 273        int flg_export;
 274        int flg_read_only;
 275        struct variables *next;
 276};
 277
 278/* globals, connect us to the outside world
 279 * the first three support $?, $#, and $1 */
 280#ifndef __U_BOOT__
 281char **global_argv;
 282unsigned int global_argc;
 283#endif
 284static unsigned int last_return_code;
 285#ifndef __U_BOOT__
 286extern char **environ; /* This is in <unistd.h>, but protected with __USE_GNU */
 287#endif
 288
 289/* "globals" within this file */
 290static uchar *ifs;
 291static char map[256];
 292#ifndef __U_BOOT__
 293static int fake_mode;
 294static int interactive;
 295static struct close_me *close_me_head;
 296static const char *cwd;
 297static struct pipe *job_list;
 298static unsigned int last_bg_pid;
 299static unsigned int last_jobid;
 300static unsigned int shell_terminal;
 301static char *PS1;
 302static char *PS2;
 303struct variables shell_ver = { "HUSH_VERSION", "0.01", 1, 1, 0 };
 304struct variables *top_vars = &shell_ver;
 305#else
 306static int flag_repeat = 0;
 307static int do_repeat = 0;
 308static struct variables *top_vars = NULL ;
 309#endif /*__U_BOOT__ */
 310
 311#define B_CHUNK (100)
 312#define B_NOSPAC 1
 313
 314typedef struct {
 315        char *data;
 316        int length;
 317        int maxlen;
 318        int quote;
 319        int nonnull;
 320} o_string;
 321#define NULL_O_STRING {NULL,0,0,0,0}
 322/* used for initialization:
 323        o_string foo = NULL_O_STRING; */
 324
 325/* I can almost use ordinary FILE *.  Is open_memstream() universally
 326 * available?  Where is it documented? */
 327struct in_str {
 328        const char *p;
 329#ifndef __U_BOOT__
 330        char peek_buf[2];
 331#endif
 332        int __promptme;
 333        int promptmode;
 334#ifndef __U_BOOT__
 335        FILE *file;
 336#endif
 337        int (*get) (struct in_str *);
 338        int (*peek) (struct in_str *);
 339};
 340#define b_getch(input) ((input)->get(input))
 341#define b_peek(input) ((input)->peek(input))
 342
 343#ifndef __U_BOOT__
 344#define JOB_STATUS_FORMAT "[%d] %-22s %.40s\n"
 345
 346struct built_in_command {
 347        char *cmd;                                      /* name */
 348        char *descr;                            /* description */
 349        int (*function) (struct child_prog *);  /* function ptr */
 350};
 351#endif
 352
 353/* define DEBUG_SHELL for debugging output (obviously ;-)) */
 354#if 0
 355#define DEBUG_SHELL
 356#endif
 357
 358/* This should be in utility.c */
 359#ifdef DEBUG_SHELL
 360#ifndef __U_BOOT__
 361static void debug_printf(const char *format, ...)
 362{
 363        va_list args;
 364        va_start(args, format);
 365        vfprintf(stderr, format, args);
 366        va_end(args);
 367}
 368#else
 369#define debug_printf(fmt,args...)       printf (fmt ,##args)
 370#endif
 371#else
 372static inline void debug_printf(const char *format, ...) { }
 373#endif
 374#define final_printf debug_printf
 375
 376#ifdef __U_BOOT__
 377static void syntax_err(void) {
 378         printf("syntax error\n");
 379}
 380#else
 381static void __syntax(char *file, int line) {
 382        error_msg("syntax error %s:%d", file, line);
 383}
 384#define syntax() __syntax(__FILE__, __LINE__)
 385#endif
 386
 387#ifdef __U_BOOT__
 388static void *xmalloc(size_t size);
 389static void *xrealloc(void *ptr, size_t size);
 390#else
 391/* Index of subroutines: */
 392/*   function prototypes for builtins */
 393static int builtin_cd(struct child_prog *child);
 394static int builtin_env(struct child_prog *child);
 395static int builtin_eval(struct child_prog *child);
 396static int builtin_exec(struct child_prog *child);
 397static int builtin_exit(struct child_prog *child);
 398static int builtin_export(struct child_prog *child);
 399static int builtin_fg_bg(struct child_prog *child);
 400static int builtin_help(struct child_prog *child);
 401static int builtin_jobs(struct child_prog *child);
 402static int builtin_pwd(struct child_prog *child);
 403static int builtin_read(struct child_prog *child);
 404static int builtin_set(struct child_prog *child);
 405static int builtin_shift(struct child_prog *child);
 406static int builtin_source(struct child_prog *child);
 407static int builtin_umask(struct child_prog *child);
 408static int builtin_unset(struct child_prog *child);
 409static int builtin_not_written(struct child_prog *child);
 410#endif
 411/*   o_string manipulation: */
 412static int b_check_space(o_string *o, int len);
 413static int b_addchr(o_string *o, int ch);
 414static void b_reset(o_string *o);
 415static int b_addqchr(o_string *o, int ch, int quote);
 416#ifndef __U_BOOT__
 417static int b_adduint(o_string *o, unsigned int i);
 418#endif
 419/*  in_str manipulations: */
 420static int static_get(struct in_str *i);
 421static int static_peek(struct in_str *i);
 422static int file_get(struct in_str *i);
 423static int file_peek(struct in_str *i);
 424#ifndef __U_BOOT__
 425static void setup_file_in_str(struct in_str *i, FILE *f);
 426#else
 427static void setup_file_in_str(struct in_str *i);
 428#endif
 429static void setup_string_in_str(struct in_str *i, const char *s);
 430#ifndef __U_BOOT__
 431/*  close_me manipulations: */
 432static void mark_open(int fd);
 433static void mark_closed(int fd);
 434static void close_all(void);
 435#endif
 436/*  "run" the final data structures: */
 437static char *indenter(int i);
 438static int free_pipe_list(struct pipe *head, int indent);
 439static int free_pipe(struct pipe *pi, int indent);
 440/*  really run the final data structures: */
 441#ifndef __U_BOOT__
 442static int setup_redirects(struct child_prog *prog, int squirrel[]);
 443#endif
 444static int run_list_real(struct pipe *pi);
 445#ifndef __U_BOOT__
 446static void pseudo_exec(struct child_prog *child) __attribute__ ((noreturn));
 447#endif
 448static int run_pipe_real(struct pipe *pi);
 449/*   extended glob support: */
 450#ifndef __U_BOOT__
 451static int globhack(const char *src, int flags, glob_t *pglob);
 452static int glob_needed(const char *s);
 453static int xglob(o_string *dest, int flags, glob_t *pglob);
 454#endif
 455/*   variable assignment: */
 456static int is_assignment(const char *s);
 457/*   data structure manipulation: */
 458#ifndef __U_BOOT__
 459static int setup_redirect(struct p_context *ctx, int fd, redir_type style, struct in_str *input);
 460#endif
 461static void initialize_context(struct p_context *ctx);
 462static int done_word(o_string *dest, struct p_context *ctx);
 463static int done_command(struct p_context *ctx);
 464static int done_pipe(struct p_context *ctx, pipe_style type);
 465/*   primary string parsing: */
 466#ifndef __U_BOOT__
 467static int redirect_dup_num(struct in_str *input);
 468static int redirect_opt_num(o_string *o);
 469static int process_command_subs(o_string *dest, struct p_context *ctx, struct in_str *input, int subst_end);
 470static int parse_group(o_string *dest, struct p_context *ctx, struct in_str *input, int ch);
 471#endif
 472static char *lookup_param(char *src);
 473static char *make_string(char **inp, int *nonnull);
 474static int handle_dollar(o_string *dest, struct p_context *ctx, struct in_str *input);
 475#ifndef __U_BOOT__
 476static int parse_string(o_string *dest, struct p_context *ctx, const char *src);
 477#endif
 478static int parse_stream(o_string *dest, struct p_context *ctx, struct in_str *input0, int end_trigger);
 479/*   setup: */
 480static int parse_stream_outer(struct in_str *inp, int flag);
 481#ifndef __U_BOOT__
 482static int parse_string_outer(const char *s, int flag);
 483static int parse_file_outer(FILE *f);
 484#endif
 485#ifndef __U_BOOT__
 486/*   job management: */
 487static int checkjobs(struct pipe* fg_pipe);
 488static void insert_bg_job(struct pipe *pi);
 489static void remove_bg_job(struct pipe *pi);
 490#endif
 491/*     local variable support */
 492static char **make_list_in(char **inp, char *name);
 493static char *insert_var_value(char *inp);
 494static char *insert_var_value_sub(char *inp, int tag_subst);
 495
 496#ifndef __U_BOOT__
 497/* Table of built-in functions.  They can be forked or not, depending on
 498 * context: within pipes, they fork.  As simple commands, they do not.
 499 * When used in non-forking context, they can change global variables
 500 * in the parent shell process.  If forked, of course they can not.
 501 * For example, 'unset foo | whatever' will parse and run, but foo will
 502 * still be set at the end. */
 503static struct built_in_command bltins[] = {
 504        {"bg", "Resume a job in the background", builtin_fg_bg},
 505        {"break", "Exit for, while or until loop", builtin_not_written},
 506        {"cd", "Change working directory", builtin_cd},
 507        {"continue", "Continue for, while or until loop", builtin_not_written},
 508        {"env", "Print all environment variables", builtin_env},
 509        {"eval", "Construct and run shell command", builtin_eval},
 510        {"exec", "Exec command, replacing this shell with the exec'd process",
 511                builtin_exec},
 512        {"exit", "Exit from shell()", builtin_exit},
 513        {"export", "Set environment variable", builtin_export},
 514        {"fg", "Bring job into the foreground", builtin_fg_bg},
 515        {"jobs", "Lists the active jobs", builtin_jobs},
 516        {"pwd", "Print current directory", builtin_pwd},
 517        {"read", "Input environment variable", builtin_read},
 518        {"return", "Return from a function", builtin_not_written},
 519        {"set", "Set/unset shell local variables", builtin_set},
 520        {"shift", "Shift positional parameters", builtin_shift},
 521        {"trap", "Trap signals", builtin_not_written},
 522        {"ulimit","Controls resource limits", builtin_not_written},
 523        {"umask","Sets file creation mask", builtin_umask},
 524        {"unset", "Unset environment variable", builtin_unset},
 525        {".", "Source-in and run commands in a file", builtin_source},
 526        {"help", "List shell built-in commands", builtin_help},
 527        {NULL, NULL, NULL}
 528};
 529
 530static const char *set_cwd(void)
 531{
 532        if(cwd==unknown)
 533                cwd = NULL;     /* xgetcwd(arg) called free(arg) */
 534        cwd = xgetcwd((char *)cwd);
 535        if (!cwd)
 536                cwd = unknown;
 537        return cwd;
 538}
 539
 540/* built-in 'eval' handler */
 541static int builtin_eval(struct child_prog *child)
 542{
 543        char *str = NULL;
 544        int rcode = EXIT_SUCCESS;
 545
 546        if (child->argv[1]) {
 547                str = make_string(child->argv + 1);
 548                parse_string_outer(str, FLAG_EXIT_FROM_LOOP |
 549                                        FLAG_PARSE_SEMICOLON);
 550                free(str);
 551                rcode = last_return_code;
 552        }
 553        return rcode;
 554}
 555
 556/* built-in 'cd <path>' handler */
 557static int builtin_cd(struct child_prog *child)
 558{
 559        char *newdir;
 560        if (child->argv[1] == NULL)
 561                newdir = env_get("HOME");
 562        else
 563                newdir = child->argv[1];
 564        if (chdir(newdir)) {
 565                printf("cd: %s: %s\n", newdir, strerror(errno));
 566                return EXIT_FAILURE;
 567        }
 568        set_cwd();
 569        return EXIT_SUCCESS;
 570}
 571
 572/* built-in 'env' handler */
 573static int builtin_env(struct child_prog *dummy)
 574{
 575        char **e = environ;
 576        if (e == NULL) return EXIT_FAILURE;
 577        for (; *e; e++) {
 578                puts(*e);
 579        }
 580        return EXIT_SUCCESS;
 581}
 582
 583/* built-in 'exec' handler */
 584static int builtin_exec(struct child_prog *child)
 585{
 586        if (child->argv[1] == NULL)
 587                return EXIT_SUCCESS;   /* Really? */
 588        child->argv++;
 589        pseudo_exec(child);
 590        /* never returns */
 591}
 592
 593/* built-in 'exit' handler */
 594static int builtin_exit(struct child_prog *child)
 595{
 596        if (child->argv[1] == NULL)
 597                exit(last_return_code);
 598        exit (atoi(child->argv[1]));
 599}
 600
 601/* built-in 'export VAR=value' handler */
 602static int builtin_export(struct child_prog *child)
 603{
 604        int res = 0;
 605        char *name = child->argv[1];
 606
 607        if (name == NULL) {
 608                return (builtin_env(child));
 609        }
 610
 611        name = strdup(name);
 612
 613        if(name) {
 614                char *value = strchr(name, '=');
 615
 616                if (!value) {
 617                        char *tmp;
 618                        /* They are exporting something without an =VALUE */
 619
 620                        value = get_local_var(name);
 621                        if (value) {
 622                                size_t ln = strlen(name);
 623
 624                                tmp = realloc(name, ln+strlen(value)+2);
 625                                if(tmp==NULL)
 626                                        res = -1;
 627                                else {
 628                                        sprintf(tmp+ln, "=%s", value);
 629                                        name = tmp;
 630                                }
 631                        } else {
 632                                /* bash does not return an error when trying to export
 633                                 * an undefined variable.  Do likewise. */
 634                                res = 1;
 635                        }
 636                }
 637        }
 638        if (res<0)
 639                perror_msg("export");
 640        else if(res==0)
 641                res = set_local_var(name, 1);
 642        else
 643                res = 0;
 644        free(name);
 645        return res;
 646}
 647
 648/* built-in 'fg' and 'bg' handler */
 649static int builtin_fg_bg(struct child_prog *child)
 650{
 651        int i, jobnum;
 652        struct pipe *pi=NULL;
 653
 654        if (!interactive)
 655                return EXIT_FAILURE;
 656        /* If they gave us no args, assume they want the last backgrounded task */
 657        if (!child->argv[1]) {
 658                for (pi = job_list; pi; pi = pi->next) {
 659                        if (pi->jobid == last_jobid) {
 660                                break;
 661                        }
 662                }
 663                if (!pi) {
 664                        error_msg("%s: no current job", child->argv[0]);
 665                        return EXIT_FAILURE;
 666                }
 667        } else {
 668                if (sscanf(child->argv[1], "%%%d", &jobnum) != 1) {
 669                        error_msg("%s: bad argument '%s'", child->argv[0], child->argv[1]);
 670                        return EXIT_FAILURE;
 671                }
 672                for (pi = job_list; pi; pi = pi->next) {
 673                        if (pi->jobid == jobnum) {
 674                                break;
 675                        }
 676                }
 677                if (!pi) {
 678                        error_msg("%s: %d: no such job", child->argv[0], jobnum);
 679                        return EXIT_FAILURE;
 680                }
 681        }
 682
 683        if (*child->argv[0] == 'f') {
 684                /* Put the job into the foreground.  */
 685                tcsetpgrp(shell_terminal, pi->pgrp);
 686        }
 687
 688        /* Restart the processes in the job */
 689        for (i = 0; i < pi->num_progs; i++)
 690                pi->progs[i].is_stopped = 0;
 691
 692        if ( (i=kill(- pi->pgrp, SIGCONT)) < 0) {
 693                if (i == ESRCH) {
 694                        remove_bg_job(pi);
 695                } else {
 696                        perror_msg("kill (SIGCONT)");
 697                }
 698        }
 699
 700        pi->stopped_progs = 0;
 701        return EXIT_SUCCESS;
 702}
 703
 704/* built-in 'help' handler */
 705static int builtin_help(struct child_prog *dummy)
 706{
 707        struct built_in_command *x;
 708
 709        printf("\nBuilt-in commands:\n");
 710        printf("-------------------\n");
 711        for (x = bltins; x->cmd; x++) {
 712                if (x->descr==NULL)
 713                        continue;
 714                printf("%s\t%s\n", x->cmd, x->descr);
 715        }
 716        printf("\n\n");
 717        return EXIT_SUCCESS;
 718}
 719
 720/* built-in 'jobs' handler */
 721static int builtin_jobs(struct child_prog *child)
 722{
 723        struct pipe *job;
 724        char *status_string;
 725
 726        for (job = job_list; job; job = job->next) {
 727                if (job->running_progs == job->stopped_progs)
 728                        status_string = "Stopped";
 729                else
 730                        status_string = "Running";
 731
 732                printf(JOB_STATUS_FORMAT, job->jobid, status_string, job->text);
 733        }
 734        return EXIT_SUCCESS;
 735}
 736
 737
 738/* built-in 'pwd' handler */
 739static int builtin_pwd(struct child_prog *dummy)
 740{
 741        puts(set_cwd());
 742        return EXIT_SUCCESS;
 743}
 744
 745/* built-in 'read VAR' handler */
 746static int builtin_read(struct child_prog *child)
 747{
 748        int res;
 749
 750        if (child->argv[1]) {
 751                char string[BUFSIZ];
 752                char *var = 0;
 753
 754                string[0] = 0;  /* In case stdin has only EOF */
 755                /* read string */
 756                fgets(string, sizeof(string), stdin);
 757                chomp(string);
 758                var = malloc(strlen(child->argv[1])+strlen(string)+2);
 759                if(var) {
 760                        sprintf(var, "%s=%s", child->argv[1], string);
 761                        res = set_local_var(var, 0);
 762                } else
 763                        res = -1;
 764                if (res)
 765                        fprintf(stderr, "read: %m\n");
 766                free(var);      /* So not move up to avoid breaking errno */
 767                return res;
 768        } else {
 769                do res=getchar(); while(res!='\n' && res!=EOF);
 770                return 0;
 771        }
 772}
 773
 774/* built-in 'set VAR=value' handler */
 775static int builtin_set(struct child_prog *child)
 776{
 777        char *temp = child->argv[1];
 778        struct variables *e;
 779
 780        if (temp == NULL)
 781                for(e = top_vars; e; e=e->next)
 782                        printf("%s=%s\n", e->name, e->value);
 783        else
 784                set_local_var(temp, 0);
 785
 786                return EXIT_SUCCESS;
 787}
 788
 789
 790/* Built-in 'shift' handler */
 791static int builtin_shift(struct child_prog *child)
 792{
 793        int n=1;
 794        if (child->argv[1]) {
 795                n=atoi(child->argv[1]);
 796        }
 797        if (n>=0 && n<global_argc) {
 798                /* XXX This probably breaks $0 */
 799                global_argc -= n;
 800                global_argv += n;
 801                return EXIT_SUCCESS;
 802        } else {
 803                return EXIT_FAILURE;
 804        }
 805}
 806
 807/* Built-in '.' handler (read-in and execute commands from file) */
 808static int builtin_source(struct child_prog *child)
 809{
 810        FILE *input;
 811        int status;
 812
 813        if (child->argv[1] == NULL)
 814                return EXIT_FAILURE;
 815
 816        /* XXX search through $PATH is missing */
 817        input = fopen(child->argv[1], "r");
 818        if (!input) {
 819                error_msg("Couldn't open file '%s'", child->argv[1]);
 820                return EXIT_FAILURE;
 821        }
 822
 823        /* Now run the file */
 824        /* XXX argv and argc are broken; need to save old global_argv
 825         * (pointer only is OK!) on this stack frame,
 826         * set global_argv=child->argv+1, recurse, and restore. */
 827        mark_open(fileno(input));
 828        status = parse_file_outer(input);
 829        mark_closed(fileno(input));
 830        fclose(input);
 831        return (status);
 832}
 833
 834static int builtin_umask(struct child_prog *child)
 835{
 836        mode_t new_umask;
 837        const char *arg = child->argv[1];
 838        char *end;
 839        if (arg) {
 840                new_umask=strtoul(arg, &end, 8);
 841                if (*end!='\0' || end == arg) {
 842                        return EXIT_FAILURE;
 843                }
 844        } else {
 845                printf("%.3o\n", (unsigned int) (new_umask=umask(0)));
 846        }
 847        umask(new_umask);
 848        return EXIT_SUCCESS;
 849}
 850
 851/* built-in 'unset VAR' handler */
 852static int builtin_unset(struct child_prog *child)
 853{
 854        /* bash returned already true */
 855        unset_local_var(child->argv[1]);
 856        return EXIT_SUCCESS;
 857}
 858
 859static int builtin_not_written(struct child_prog *child)
 860{
 861        printf("builtin_%s not written\n",child->argv[0]);
 862        return EXIT_FAILURE;
 863}
 864#endif
 865
 866static int b_check_space(o_string *o, int len)
 867{
 868        /* It would be easy to drop a more restrictive policy
 869         * in here, such as setting a maximum string length */
 870        if (o->length + len > o->maxlen) {
 871                char *old_data = o->data;
 872                /* assert (data == NULL || o->maxlen != 0); */
 873                o->maxlen += max(2*len, B_CHUNK);
 874                o->data = realloc(o->data, 1 + o->maxlen);
 875                if (o->data == NULL) {
 876                        free(old_data);
 877                }
 878        }
 879        return o->data == NULL;
 880}
 881
 882static int b_addchr(o_string *o, int ch)
 883{
 884        debug_printf("b_addchr: %c %d %p\n", ch, o->length, o);
 885        if (b_check_space(o, 1)) return B_NOSPAC;
 886        o->data[o->length] = ch;
 887        o->length++;
 888        o->data[o->length] = '\0';
 889        return 0;
 890}
 891
 892static void b_reset(o_string *o)
 893{
 894        o->length = 0;
 895        o->nonnull = 0;
 896        if (o->data != NULL) *o->data = '\0';
 897}
 898
 899static void b_free(o_string *o)
 900{
 901        b_reset(o);
 902        free(o->data);
 903        o->data = NULL;
 904        o->maxlen = 0;
 905}
 906
 907/* My analysis of quoting semantics tells me that state information
 908 * is associated with a destination, not a source.
 909 */
 910static int b_addqchr(o_string *o, int ch, int quote)
 911{
 912        if (quote && strchr("*?[\\",ch)) {
 913                int rc;
 914                rc = b_addchr(o, '\\');
 915                if (rc) return rc;
 916        }
 917        return b_addchr(o, ch);
 918}
 919
 920#ifndef __U_BOOT__
 921static int b_adduint(o_string *o, unsigned int i)
 922{
 923        int r;
 924        char *p = simple_itoa(i);
 925        /* no escape checking necessary */
 926        do r=b_addchr(o, *p++); while (r==0 && *p);
 927        return r;
 928}
 929#endif
 930
 931static int static_get(struct in_str *i)
 932{
 933        int ch = *i->p++;
 934        if (ch=='\0') return EOF;
 935        return ch;
 936}
 937
 938static int static_peek(struct in_str *i)
 939{
 940        return *i->p;
 941}
 942
 943#ifndef __U_BOOT__
 944static inline void cmdedit_set_initial_prompt(void)
 945{
 946#ifndef CONFIG_FEATURE_SH_FANCY_PROMPT
 947        PS1 = NULL;
 948#else
 949        PS1 = env_get("PS1");
 950        if(PS1==0)
 951                PS1 = "\\w \\$ ";
 952#endif
 953}
 954
 955static inline void setup_prompt_string(int promptmode, char **prompt_str)
 956{
 957        debug_printf("setup_prompt_string %d ",promptmode);
 958#ifndef CONFIG_FEATURE_SH_FANCY_PROMPT
 959        /* Set up the prompt */
 960        if (promptmode == 1) {
 961                free(PS1);
 962                PS1=xmalloc(strlen(cwd)+4);
 963                sprintf(PS1, "%s %s", cwd, ( geteuid() != 0 ) ?  "$ ":"# ");
 964                *prompt_str = PS1;
 965        } else {
 966                *prompt_str = PS2;
 967        }
 968#else
 969        *prompt_str = (promptmode==1)? PS1 : PS2;
 970#endif
 971        debug_printf("result %s\n",*prompt_str);
 972}
 973#endif
 974
 975#ifdef __U_BOOT__
 976static int uboot_cli_readline(struct in_str *i)
 977{
 978        char *prompt;
 979        char __maybe_unused *ps_prompt = NULL;
 980
 981        if (i->promptmode == 1)
 982                prompt = CONFIG_SYS_PROMPT;
 983        else
 984                prompt = CONFIG_SYS_PROMPT_HUSH_PS2;
 985
 986#ifdef CONFIG_CMDLINE_PS_SUPPORT
 987        if (i->promptmode == 1)
 988                ps_prompt = env_get("PS1");
 989        else
 990                ps_prompt = env_get("PS2");
 991        if (ps_prompt)
 992                prompt = ps_prompt;
 993#endif
 994
 995        return cli_readline(prompt);
 996}
 997#endif
 998
 999static void get_user_input(struct in_str *i)
1000{
1001#ifndef __U_BOOT__
1002        char *prompt_str;
1003        static char the_command[BUFSIZ];
1004
1005        setup_prompt_string(i->promptmode, &prompt_str);
1006#ifdef CONFIG_FEATURE_COMMAND_EDITING
1007        /*
1008         ** enable command line editing only while a command line
1009         ** is actually being read; otherwise, we'll end up bequeathing
1010         ** atexit() handlers and other unwanted stuff to our
1011         ** child processes (rob@sysgo.de)
1012         */
1013        cmdedit_read_input(prompt_str, the_command);
1014#else
1015        fputs(prompt_str, stdout);
1016        fflush(stdout);
1017        the_command[0]=fgetc(i->file);
1018        the_command[1]='\0';
1019#endif
1020        fflush(stdout);
1021        i->p = the_command;
1022#else
1023        int n;
1024        static char the_command[CONFIG_SYS_CBSIZE + 1];
1025
1026        bootretry_reset_cmd_timeout();
1027        i->__promptme = 1;
1028        n = uboot_cli_readline(i);
1029
1030#ifdef CONFIG_BOOT_RETRY_TIME
1031        if (n == -2) {
1032          puts("\nTimeout waiting for command\n");
1033#  ifdef CONFIG_RESET_TO_RETRY
1034          do_reset(NULL, 0, 0, NULL);
1035#  else
1036#       error "This currently only works with CONFIG_RESET_TO_RETRY enabled"
1037#  endif
1038        }
1039#endif
1040        if (n == -1 ) {
1041                flag_repeat = 0;
1042                i->__promptme = 0;
1043        }
1044        n = strlen(console_buffer);
1045        console_buffer[n] = '\n';
1046        console_buffer[n+1]= '\0';
1047        if (had_ctrlc()) flag_repeat = 0;
1048        clear_ctrlc();
1049        do_repeat = 0;
1050        if (i->promptmode == 1) {
1051                if (console_buffer[0] == '\n'&& flag_repeat == 0) {
1052                        strcpy(the_command,console_buffer);
1053                }
1054                else {
1055                        if (console_buffer[0] != '\n') {
1056                                strcpy(the_command,console_buffer);
1057                                flag_repeat = 1;
1058                        }
1059                        else {
1060                                do_repeat = 1;
1061                        }
1062                }
1063                i->p = the_command;
1064        }
1065        else {
1066                if (console_buffer[0] != '\n') {
1067                        if (strlen(the_command) + strlen(console_buffer)
1068                            < CONFIG_SYS_CBSIZE) {
1069                                n = strlen(the_command);
1070                                the_command[n-1] = ' ';
1071                                strcpy(&the_command[n],console_buffer);
1072                        }
1073                        else {
1074                                the_command[0] = '\n';
1075                                the_command[1] = '\0';
1076                                flag_repeat = 0;
1077                        }
1078                }
1079                if (i->__promptme == 0) {
1080                        the_command[0] = '\n';
1081                        the_command[1] = '\0';
1082                }
1083                i->p = console_buffer;
1084        }
1085#endif
1086}
1087
1088/* This is the magic location that prints prompts
1089 * and gets data back from the user */
1090static int file_get(struct in_str *i)
1091{
1092        int ch;
1093
1094        ch = 0;
1095        /* If there is data waiting, eat it up */
1096        if (i->p && *i->p) {
1097                ch = *i->p++;
1098        } else {
1099                /* need to double check i->file because we might be doing something
1100                 * more complicated by now, like sourcing or substituting. */
1101#ifndef __U_BOOT__
1102                if (i->__promptme && interactive && i->file == stdin) {
1103                        while(! i->p || (interactive && strlen(i->p)==0) ) {
1104#else
1105                        while(! i->p  || strlen(i->p)==0 ) {
1106#endif
1107                                get_user_input(i);
1108                        }
1109                        i->promptmode=2;
1110#ifndef __U_BOOT__
1111                        i->__promptme = 0;
1112#endif
1113                        if (i->p && *i->p) {
1114                                ch = *i->p++;
1115                        }
1116#ifndef __U_BOOT__
1117                } else {
1118                        ch = fgetc(i->file);
1119                }
1120
1121#endif
1122                debug_printf("b_getch: got a %d\n", ch);
1123        }
1124#ifndef __U_BOOT__
1125        if (ch == '\n') i->__promptme=1;
1126#endif
1127        return ch;
1128}
1129
1130/* All the callers guarantee this routine will never be
1131 * used right after a newline, so prompting is not needed.
1132 */
1133static int file_peek(struct in_str *i)
1134{
1135#ifndef __U_BOOT__
1136        if (i->p && *i->p) {
1137#endif
1138                return *i->p;
1139#ifndef __U_BOOT__
1140        } else {
1141                i->peek_buf[0] = fgetc(i->file);
1142                i->peek_buf[1] = '\0';
1143                i->p = i->peek_buf;
1144                debug_printf("b_peek: got a %d\n", *i->p);
1145                return *i->p;
1146        }
1147#endif
1148}
1149
1150#ifndef __U_BOOT__
1151static void setup_file_in_str(struct in_str *i, FILE *f)
1152#else
1153static void setup_file_in_str(struct in_str *i)
1154#endif
1155{
1156        i->peek = file_peek;
1157        i->get = file_get;
1158        i->__promptme=1;
1159        i->promptmode=1;
1160#ifndef __U_BOOT__
1161        i->file = f;
1162#endif
1163        i->p = NULL;
1164}
1165
1166static void setup_string_in_str(struct in_str *i, const char *s)
1167{
1168        i->peek = static_peek;
1169        i->get = static_get;
1170        i->__promptme=1;
1171        i->promptmode=1;
1172        i->p = s;
1173}
1174
1175#ifndef __U_BOOT__
1176static void mark_open(int fd)
1177{
1178        struct close_me *new = xmalloc(sizeof(struct close_me));
1179        new->fd = fd;
1180        new->next = close_me_head;
1181        close_me_head = new;
1182}
1183
1184static void mark_closed(int fd)
1185{
1186        struct close_me *tmp;
1187        if (close_me_head == NULL || close_me_head->fd != fd)
1188                error_msg_and_die("corrupt close_me");
1189        tmp = close_me_head;
1190        close_me_head = close_me_head->next;
1191        free(tmp);
1192}
1193
1194static void close_all(void)
1195{
1196        struct close_me *c;
1197        for (c=close_me_head; c; c=c->next) {
1198                close(c->fd);
1199        }
1200        close_me_head = NULL;
1201}
1202
1203/* squirrel != NULL means we squirrel away copies of stdin, stdout,
1204 * and stderr if they are redirected. */
1205static int setup_redirects(struct child_prog *prog, int squirrel[])
1206{
1207        int openfd, mode;
1208        struct redir_struct *redir;
1209
1210        for (redir=prog->redirects; redir; redir=redir->next) {
1211                if (redir->dup == -1 && redir->word.gl_pathv == NULL) {
1212                        /* something went wrong in the parse.  Pretend it didn't happen */
1213                        continue;
1214                }
1215                if (redir->dup == -1) {
1216                        mode=redir_table[redir->type].mode;
1217                        openfd = open(redir->word.gl_pathv[0], mode, 0666);
1218                        if (openfd < 0) {
1219                        /* this could get lost if stderr has been redirected, but
1220                           bash and ash both lose it as well (though zsh doesn't!) */
1221                                perror_msg("error opening %s", redir->word.gl_pathv[0]);
1222                                return 1;
1223                        }
1224                } else {
1225                        openfd = redir->dup;
1226                }
1227
1228                if (openfd != redir->fd) {
1229                        if (squirrel && redir->fd < 3) {
1230                                squirrel[redir->fd] = dup(redir->fd);
1231                        }
1232                        if (openfd == -3) {
1233                                close(openfd);
1234                        } else {
1235                                dup2(openfd, redir->fd);
1236                                if (redir->dup == -1)
1237                                        close (openfd);
1238                        }
1239                }
1240        }
1241        return 0;
1242}
1243
1244static void restore_redirects(int squirrel[])
1245{
1246        int i, fd;
1247        for (i=0; i<3; i++) {
1248                fd = squirrel[i];
1249                if (fd != -1) {
1250                        /* No error checking.  I sure wouldn't know what
1251                         * to do with an error if I found one! */
1252                        dup2(fd, i);
1253                        close(fd);
1254                }
1255        }
1256}
1257
1258/* never returns */
1259/* XXX no exit() here.  If you don't exec, use _exit instead.
1260 * The at_exit handlers apparently confuse the calling process,
1261 * in particular stdin handling.  Not sure why? */
1262static void pseudo_exec(struct child_prog *child)
1263{
1264        int i, rcode;
1265        char *p;
1266        struct built_in_command *x;
1267        if (child->argv) {
1268                for (i=0; is_assignment(child->argv[i]); i++) {
1269                        debug_printf("pid %d environment modification: %s\n",getpid(),child->argv[i]);
1270                        p = insert_var_value(child->argv[i]);
1271                        putenv(strdup(p));
1272                        if (p != child->argv[i]) free(p);
1273                }
1274                child->argv+=i;  /* XXX this hack isn't so horrible, since we are about
1275                                        to exit, and therefore don't need to keep data
1276                                        structures consistent for free() use. */
1277                /* If a variable is assigned in a forest, and nobody listens,
1278                 * was it ever really set?
1279                 */
1280                if (child->argv[0] == NULL) {
1281                        _exit(EXIT_SUCCESS);
1282                }
1283
1284                /*
1285                 * Check if the command matches any of the builtins.
1286                 * Depending on context, this might be redundant.  But it's
1287                 * easier to waste a few CPU cycles than it is to figure out
1288                 * if this is one of those cases.
1289                 */
1290                for (x = bltins; x->cmd; x++) {
1291                        if (strcmp(child->argv[0], x->cmd) == 0 ) {
1292                                debug_printf("builtin exec %s\n", child->argv[0]);
1293                                rcode = x->function(child);
1294                                fflush(stdout);
1295                                _exit(rcode);
1296                        }
1297                }
1298
1299                /* Check if the command matches any busybox internal commands
1300                 * ("applets") here.
1301                 * FIXME: This feature is not 100% safe, since
1302                 * BusyBox is not fully reentrant, so we have no guarantee the things
1303                 * from the .bss are still zeroed, or that things from .data are still
1304                 * at their defaults.  We could exec ourself from /proc/self/exe, but I
1305                 * really dislike relying on /proc for things.  We could exec ourself
1306                 * from global_argv[0], but if we are in a chroot, we may not be able
1307                 * to find ourself... */
1308#ifdef CONFIG_FEATURE_SH_STANDALONE_SHELL
1309                {
1310                        int argc_l;
1311                        char** argv_l=child->argv;
1312                        char *name = child->argv[0];
1313
1314#ifdef CONFIG_FEATURE_SH_APPLETS_ALWAYS_WIN
1315                        /* Following discussions from November 2000 on the busybox mailing
1316                         * list, the default configuration, (without
1317                         * get_last_path_component()) lets the user force use of an
1318                         * external command by specifying the full (with slashes) filename.
1319                         * If you enable CONFIG_FEATURE_SH_APPLETS_ALWAYS_WIN then applets
1320                         * _aways_ override external commands, so if you want to run
1321                         * /bin/cat, it will use BusyBox cat even if /bin/cat exists on the
1322                         * filesystem and is _not_ busybox.  Some systems may want this,
1323                         * most do not.  */
1324                        name = get_last_path_component(name);
1325#endif
1326                        /* Count argc for use in a second... */
1327                        for(argc_l=0;*argv_l!=NULL; argv_l++, argc_l++);
1328                        optind = 1;
1329                        debug_printf("running applet %s\n", name);
1330                        run_applet_by_name(name, argc_l, child->argv);
1331                }
1332#endif
1333                debug_printf("exec of %s\n",child->argv[0]);
1334                execvp(child->argv[0],child->argv);
1335                perror_msg("couldn't exec: %s",child->argv[0]);
1336                _exit(1);
1337        } else if (child->group) {
1338                debug_printf("runtime nesting to group\n");
1339                interactive=0;    /* crucial!!!! */
1340                rcode = run_list_real(child->group);
1341                /* OK to leak memory by not calling free_pipe_list,
1342                 * since this process is about to exit */
1343                _exit(rcode);
1344        } else {
1345                /* Can happen.  See what bash does with ">foo" by itself. */
1346                debug_printf("trying to pseudo_exec null command\n");
1347                _exit(EXIT_SUCCESS);
1348        }
1349}
1350
1351static void insert_bg_job(struct pipe *pi)
1352{
1353        struct pipe *thejob;
1354
1355        /* Linear search for the ID of the job to use */
1356        pi->jobid = 1;
1357        for (thejob = job_list; thejob; thejob = thejob->next)
1358                if (thejob->jobid >= pi->jobid)
1359                        pi->jobid = thejob->jobid + 1;
1360
1361        /* add thejob to the list of running jobs */
1362        if (!job_list) {
1363                thejob = job_list = xmalloc(sizeof(*thejob));
1364        } else {
1365                for (thejob = job_list; thejob->next; thejob = thejob->next) /* nothing */;
1366                thejob->next = xmalloc(sizeof(*thejob));
1367                thejob = thejob->next;
1368        }
1369
1370        /* physically copy the struct job */
1371        memcpy(thejob, pi, sizeof(struct pipe));
1372        thejob->next = NULL;
1373        thejob->running_progs = thejob->num_progs;
1374        thejob->stopped_progs = 0;
1375        thejob->text = xmalloc(BUFSIZ); /* cmdedit buffer size */
1376
1377        /*if (pi->progs[0] && pi->progs[0].argv && pi->progs[0].argv[0]) */
1378        {
1379                char *bar=thejob->text;
1380                char **foo=pi->progs[0].argv;
1381                while(foo && *foo) {
1382                        bar += sprintf(bar, "%s ", *foo++);
1383                }
1384        }
1385
1386        /* we don't wait for background thejobs to return -- append it
1387           to the list of backgrounded thejobs and leave it alone */
1388        printf("[%d] %d\n", thejob->jobid, thejob->progs[0].pid);
1389        last_bg_pid = thejob->progs[0].pid;
1390        last_jobid = thejob->jobid;
1391}
1392
1393/* remove a backgrounded job */
1394static void remove_bg_job(struct pipe *pi)
1395{
1396        struct pipe *prev_pipe;
1397
1398        if (pi == job_list) {
1399                job_list = pi->next;
1400        } else {
1401                prev_pipe = job_list;
1402                while (prev_pipe->next != pi)
1403                        prev_pipe = prev_pipe->next;
1404                prev_pipe->next = pi->next;
1405        }
1406        if (job_list)
1407                last_jobid = job_list->jobid;
1408        else
1409                last_jobid = 0;
1410
1411        pi->stopped_progs = 0;
1412        free_pipe(pi, 0);
1413        free(pi);
1414}
1415
1416/* Checks to see if any processes have exited -- if they
1417   have, figure out why and see if a job has completed */
1418static int checkjobs(struct pipe* fg_pipe)
1419{
1420        int attributes;
1421        int status;
1422        int prognum = 0;
1423        struct pipe *pi;
1424        pid_t childpid;
1425
1426        attributes = WUNTRACED;
1427        if (fg_pipe==NULL) {
1428                attributes |= WNOHANG;
1429        }
1430
1431        while ((childpid = waitpid(-1, &status, attributes)) > 0) {
1432                if (fg_pipe) {
1433                        int i, rcode = 0;
1434                        for (i=0; i < fg_pipe->num_progs; i++) {
1435                                if (fg_pipe->progs[i].pid == childpid) {
1436                                        if (i==fg_pipe->num_progs-1)
1437                                                rcode=WEXITSTATUS(status);
1438                                        (fg_pipe->num_progs)--;
1439                                        return(rcode);
1440                                }
1441                        }
1442                }
1443
1444                for (pi = job_list; pi; pi = pi->next) {
1445                        prognum = 0;
1446                        while (prognum < pi->num_progs && pi->progs[prognum].pid != childpid) {
1447                                prognum++;
1448                        }
1449                        if (prognum < pi->num_progs)
1450                                break;
1451                }
1452
1453                if(pi==NULL) {
1454                        debug_printf("checkjobs: pid %d was not in our list!\n", childpid);
1455                        continue;
1456                }
1457
1458                if (WIFEXITED(status) || WIFSIGNALED(status)) {
1459                        /* child exited */
1460                        pi->running_progs--;
1461                        pi->progs[prognum].pid = 0;
1462
1463                        if (!pi->running_progs) {
1464                                printf(JOB_STATUS_FORMAT, pi->jobid, "Done", pi->text);
1465                                remove_bg_job(pi);
1466                        }
1467                } else {
1468                        /* child stopped */
1469                        pi->stopped_progs++;
1470                        pi->progs[prognum].is_stopped = 1;
1471
1472#if 0
1473                        /* Printing this stuff is a pain, since it tends to
1474                         * overwrite the prompt an inconveinient moments.  So
1475                         * don't do that.  */
1476                        if (pi->stopped_progs == pi->num_progs) {
1477                                printf("\n"JOB_STATUS_FORMAT, pi->jobid, "Stopped", pi->text);
1478                        }
1479#endif
1480                }
1481        }
1482
1483        if (childpid == -1 && errno != ECHILD)
1484                perror_msg("waitpid");
1485
1486        /* move the shell to the foreground */
1487        /*if (interactive && tcsetpgrp(shell_terminal, getpgid(0))) */
1488        /*      perror_msg("tcsetpgrp-2"); */
1489        return -1;
1490}
1491
1492/* Figure out our controlling tty, checking in order stderr,
1493 * stdin, and stdout.  If check_pgrp is set, also check that
1494 * we belong to the foreground process group associated with
1495 * that tty.  The value of shell_terminal is needed in order to call
1496 * tcsetpgrp(shell_terminal, ...); */
1497void controlling_tty(int check_pgrp)
1498{
1499        pid_t curpgrp;
1500
1501        if ((curpgrp = tcgetpgrp(shell_terminal = 2)) < 0
1502                        && (curpgrp = tcgetpgrp(shell_terminal = 0)) < 0
1503                        && (curpgrp = tcgetpgrp(shell_terminal = 1)) < 0)
1504                goto shell_terminal_error;
1505
1506        if (check_pgrp && curpgrp != getpgid(0))
1507                goto shell_terminal_error;
1508
1509        return;
1510
1511shell_terminal_error:
1512                shell_terminal = -1;
1513                return;
1514}
1515#endif
1516
1517/* run_pipe_real() starts all the jobs, but doesn't wait for anything
1518 * to finish.  See checkjobs().
1519 *
1520 * return code is normally -1, when the caller has to wait for children
1521 * to finish to determine the exit status of the pipe.  If the pipe
1522 * is a simple builtin command, however, the action is done by the
1523 * time run_pipe_real returns, and the exit code is provided as the
1524 * return value.
1525 *
1526 * The input of the pipe is always stdin, the output is always
1527 * stdout.  The outpipe[] mechanism in BusyBox-0.48 lash is bogus,
1528 * because it tries to avoid running the command substitution in
1529 * subshell, when that is in fact necessary.  The subshell process
1530 * now has its stdout directed to the input of the appropriate pipe,
1531 * so this routine is noticeably simpler.
1532 */
1533static int run_pipe_real(struct pipe *pi)
1534{
1535        int i;
1536#ifndef __U_BOOT__
1537        int nextin, nextout;
1538        int pipefds[2];                         /* pipefds[0] is for reading */
1539        struct child_prog *child;
1540        struct built_in_command *x;
1541        char *p;
1542# if __GNUC__
1543        /* Avoid longjmp clobbering */
1544        (void) &i;
1545        (void) &nextin;
1546        (void) &nextout;
1547        (void) &child;
1548# endif
1549#else
1550        int nextin;
1551        int flag = do_repeat ? CMD_FLAG_REPEAT : 0;
1552        struct child_prog *child;
1553        char *p;
1554# if __GNUC__
1555        /* Avoid longjmp clobbering */
1556        (void) &i;
1557        (void) &nextin;
1558        (void) &child;
1559# endif
1560#endif  /* __U_BOOT__ */
1561
1562        nextin = 0;
1563#ifndef __U_BOOT__
1564        pi->pgrp = -1;
1565#endif
1566
1567        /* Check if this is a simple builtin (not part of a pipe).
1568         * Builtins within pipes have to fork anyway, and are handled in
1569         * pseudo_exec.  "echo foo | read bar" doesn't work on bash, either.
1570         */
1571        if (pi->num_progs == 1) child = & (pi->progs[0]);
1572#ifndef __U_BOOT__
1573        if (pi->num_progs == 1 && child->group && child->subshell == 0) {
1574                int squirrel[] = {-1, -1, -1};
1575                int rcode;
1576                debug_printf("non-subshell grouping\n");
1577                setup_redirects(child, squirrel);
1578                /* XXX could we merge code with following builtin case,
1579                 * by creating a pseudo builtin that calls run_list_real? */
1580                rcode = run_list_real(child->group);
1581                restore_redirects(squirrel);
1582#else
1583                if (pi->num_progs == 1 && child->group) {
1584                int rcode;
1585                debug_printf("non-subshell grouping\n");
1586                rcode = run_list_real(child->group);
1587#endif
1588                return rcode;
1589        } else if (pi->num_progs == 1 && pi->progs[0].argv != NULL) {
1590                for (i=0; is_assignment(child->argv[i]); i++) { /* nothing */ }
1591                if (i!=0 && child->argv[i]==NULL) {
1592                        /* assignments, but no command: set the local environment */
1593                        for (i=0; child->argv[i]!=NULL; i++) {
1594
1595                                /* Ok, this case is tricky.  We have to decide if this is a
1596                                 * local variable, or an already exported variable.  If it is
1597                                 * already exported, we have to export the new value.  If it is
1598                                 * not exported, we need only set this as a local variable.
1599                                 * This junk is all to decide whether or not to export this
1600                                 * variable. */
1601                                int export_me=0;
1602                                char *name, *value;
1603                                name = xstrdup(child->argv[i]);
1604                                debug_printf("Local environment set: %s\n", name);
1605                                value = strchr(name, '=');
1606                                if (value)
1607                                        *value=0;
1608#ifndef __U_BOOT__
1609                                if ( get_local_var(name)) {
1610                                        export_me=1;
1611                                }
1612#endif
1613                                free(name);
1614                                p = insert_var_value(child->argv[i]);
1615                                set_local_var(p, export_me);
1616                                if (p != child->argv[i]) free(p);
1617                        }
1618                        return EXIT_SUCCESS;   /* don't worry about errors in set_local_var() yet */
1619                }
1620                for (i = 0; is_assignment(child->argv[i]); i++) {
1621                        p = insert_var_value(child->argv[i]);
1622#ifndef __U_BOOT__
1623                        putenv(strdup(p));
1624#else
1625                        set_local_var(p, 0);
1626#endif
1627                        if (p != child->argv[i]) {
1628                                child->sp--;
1629                                free(p);
1630                        }
1631                }
1632                if (child->sp) {
1633                        char * str = NULL;
1634
1635                        str = make_string(child->argv + i,
1636                                          child->argv_nonnull + i);
1637                        parse_string_outer(str, FLAG_EXIT_FROM_LOOP | FLAG_REPARSING);
1638                        free(str);
1639                        return last_return_code;
1640                }
1641#ifndef __U_BOOT__
1642                for (x = bltins; x->cmd; x++) {
1643                        if (strcmp(child->argv[i], x->cmd) == 0 ) {
1644                                int squirrel[] = {-1, -1, -1};
1645                                int rcode;
1646                                if (x->function == builtin_exec && child->argv[i+1]==NULL) {
1647                                        debug_printf("magic exec\n");
1648                                        setup_redirects(child,NULL);
1649                                        return EXIT_SUCCESS;
1650                                }
1651                                debug_printf("builtin inline %s\n", child->argv[0]);
1652                                /* XXX setup_redirects acts on file descriptors, not FILEs.
1653                                 * This is perfect for work that comes after exec().
1654                                 * Is it really safe for inline use?  Experimentally,
1655                                 * things seem to work with glibc. */
1656                                setup_redirects(child, squirrel);
1657
1658                                child->argv += i;  /* XXX horrible hack */
1659                                rcode = x->function(child);
1660                                /* XXX restore hack so free() can work right */
1661                                child->argv -= i;
1662                                restore_redirects(squirrel);
1663                        }
1664                        return rcode;
1665                }
1666#else
1667                /* check ";", because ,example , argv consist from
1668                 * "help;flinfo" must not execute
1669                 */
1670                if (strchr(child->argv[i], ';')) {
1671                        printf("Unknown command '%s' - try 'help' or use "
1672                                        "'run' command\n", child->argv[i]);
1673                        return -1;
1674                }
1675                /* Process the command */
1676                return cmd_process(flag, child->argc - i, child->argv + i,
1677                                   &flag_repeat, NULL);
1678#endif
1679        }
1680#ifndef __U_BOOT__
1681
1682        for (i = 0; i < pi->num_progs; i++) {
1683                child = & (pi->progs[i]);
1684
1685                /* pipes are inserted between pairs of commands */
1686                if ((i + 1) < pi->num_progs) {
1687                        if (pipe(pipefds)<0) perror_msg_and_die("pipe");
1688                        nextout = pipefds[1];
1689                } else {
1690                        nextout=1;
1691                        pipefds[0] = -1;
1692                }
1693
1694                /* XXX test for failed fork()? */
1695                if (!(child->pid = fork())) {
1696                        /* Set the handling for job control signals back to the default.  */
1697                        signal(SIGINT, SIG_DFL);
1698                        signal(SIGQUIT, SIG_DFL);
1699                        signal(SIGTERM, SIG_DFL);
1700                        signal(SIGTSTP, SIG_DFL);
1701                        signal(SIGTTIN, SIG_DFL);
1702                        signal(SIGTTOU, SIG_DFL);
1703                        signal(SIGCHLD, SIG_DFL);
1704
1705                        close_all();
1706
1707                        if (nextin != 0) {
1708                                dup2(nextin, 0);
1709                                close(nextin);
1710                        }
1711                        if (nextout != 1) {
1712                                dup2(nextout, 1);
1713                                close(nextout);
1714                        }
1715                        if (pipefds[0]!=-1) {
1716                                close(pipefds[0]);  /* opposite end of our output pipe */
1717                        }
1718
1719                        /* Like bash, explicit redirects override pipes,
1720                         * and the pipe fd is available for dup'ing. */
1721                        setup_redirects(child,NULL);
1722
1723                        if (interactive && pi->followup!=PIPE_BG) {
1724                                /* If we (the child) win the race, put ourselves in the process
1725                                 * group whose leader is the first process in this pipe. */
1726                                if (pi->pgrp < 0) {
1727                                        pi->pgrp = getpid();
1728                                }
1729                                if (setpgid(0, pi->pgrp) == 0) {
1730                                        tcsetpgrp(2, pi->pgrp);
1731                                }
1732                        }
1733
1734                        pseudo_exec(child);
1735                }
1736
1737
1738                /* put our child in the process group whose leader is the
1739                   first process in this pipe */
1740                if (pi->pgrp < 0) {
1741                        pi->pgrp = child->pid;
1742                }
1743                /* Don't check for errors.  The child may be dead already,
1744                 * in which case setpgid returns error code EACCES. */
1745                setpgid(child->pid, pi->pgrp);
1746
1747                if (nextin != 0)
1748                        close(nextin);
1749                if (nextout != 1)
1750                        close(nextout);
1751
1752                /* If there isn't another process, nextin is garbage
1753                   but it doesn't matter */
1754                nextin = pipefds[0];
1755        }
1756#endif
1757        return -1;
1758}
1759
1760static int run_list_real(struct pipe *pi)
1761{
1762        char *save_name = NULL;
1763        char **list = NULL;
1764        char **save_list = NULL;
1765        struct pipe *rpipe;
1766        int flag_rep = 0;
1767#ifndef __U_BOOT__
1768        int save_num_progs;
1769#endif
1770        int rcode=0, flag_skip=1;
1771        int flag_restore = 0;
1772        int if_code=0, next_if_code=0;  /* need double-buffer to handle elif */
1773        reserved_style rmode, skip_more_in_this_rmode=RES_XXXX;
1774        /* check syntax for "for" */
1775        for (rpipe = pi; rpipe; rpipe = rpipe->next) {
1776                if ((rpipe->r_mode == RES_IN ||
1777                    rpipe->r_mode == RES_FOR) &&
1778                    (rpipe->next == NULL)) {
1779                                syntax();
1780#ifdef __U_BOOT__
1781                                flag_repeat = 0;
1782#endif
1783                                return 1;
1784                }
1785                if ((rpipe->r_mode == RES_IN &&
1786                        (rpipe->next->r_mode == RES_IN &&
1787                        rpipe->next->progs->argv != NULL))||
1788                        (rpipe->r_mode == RES_FOR &&
1789                        rpipe->next->r_mode != RES_IN)) {
1790                                syntax();
1791#ifdef __U_BOOT__
1792                                flag_repeat = 0;
1793#endif
1794                                return 1;
1795                }
1796        }
1797        for (; pi; pi = (flag_restore != 0) ? rpipe : pi->next) {
1798                if (pi->r_mode == RES_WHILE || pi->r_mode == RES_UNTIL ||
1799                        pi->r_mode == RES_FOR) {
1800#ifdef __U_BOOT__
1801                                /* check Ctrl-C */
1802                                ctrlc();
1803                                if ((had_ctrlc())) {
1804                                        return 1;
1805                                }
1806#endif
1807                                flag_restore = 0;
1808                                if (!rpipe) {
1809                                        flag_rep = 0;
1810                                        rpipe = pi;
1811                                }
1812                }
1813                rmode = pi->r_mode;
1814                debug_printf("rmode=%d  if_code=%d  next_if_code=%d skip_more=%d\n", rmode, if_code, next_if_code, skip_more_in_this_rmode);
1815                if (rmode == skip_more_in_this_rmode && flag_skip) {
1816                        if (pi->followup == PIPE_SEQ) flag_skip=0;
1817                        continue;
1818                }
1819                flag_skip = 1;
1820                skip_more_in_this_rmode = RES_XXXX;
1821                if (rmode == RES_THEN || rmode == RES_ELSE) if_code = next_if_code;
1822                if (rmode == RES_THEN &&  if_code) continue;
1823                if (rmode == RES_ELSE && !if_code) continue;
1824                if (rmode == RES_ELIF && !if_code) break;
1825                if (rmode == RES_FOR && pi->num_progs) {
1826                        if (!list) {
1827                                /* if no variable values after "in" we skip "for" */
1828                                if (!pi->next->progs->argv) continue;
1829                                /* create list of variable values */
1830                                list = make_list_in(pi->next->progs->argv,
1831                                        pi->progs->argv[0]);
1832                                save_list = list;
1833                                save_name = pi->progs->argv[0];
1834                                pi->progs->argv[0] = NULL;
1835                                flag_rep = 1;
1836                        }
1837                        if (!(*list)) {
1838                                free(pi->progs->argv[0]);
1839                                free(save_list);
1840                                list = NULL;
1841                                flag_rep = 0;
1842                                pi->progs->argv[0] = save_name;
1843#ifndef __U_BOOT__
1844                                pi->progs->glob_result.gl_pathv[0] =
1845                                        pi->progs->argv[0];
1846#endif
1847                                continue;
1848                        } else {
1849                                /* insert new value from list for variable */
1850                                free(pi->progs->argv[0]);
1851                                pi->progs->argv[0] = *list++;
1852#ifndef __U_BOOT__
1853                                pi->progs->glob_result.gl_pathv[0] =
1854                                        pi->progs->argv[0];
1855#endif
1856                        }
1857                }
1858                if (rmode == RES_IN) continue;
1859                if (rmode == RES_DO) {
1860                        if (!flag_rep) continue;
1861                }
1862                if (rmode == RES_DONE) {
1863                        if (flag_rep) {
1864                                flag_restore = 1;
1865                        } else {
1866                                rpipe = NULL;
1867                        }
1868                }
1869                if (pi->num_progs == 0) continue;
1870#ifndef __U_BOOT__
1871                save_num_progs = pi->num_progs; /* save number of programs */
1872#endif
1873                rcode = run_pipe_real(pi);
1874                debug_printf("run_pipe_real returned %d\n",rcode);
1875#ifndef __U_BOOT__
1876                if (rcode!=-1) {
1877                        /* We only ran a builtin: rcode was set by the return value
1878                         * of run_pipe_real(), and we don't need to wait for anything. */
1879                } else if (pi->followup==PIPE_BG) {
1880                        /* XXX check bash's behavior with nontrivial pipes */
1881                        /* XXX compute jobid */
1882                        /* XXX what does bash do with attempts to background builtins? */
1883                        insert_bg_job(pi);
1884                        rcode = EXIT_SUCCESS;
1885                } else {
1886                        if (interactive) {
1887                                /* move the new process group into the foreground */
1888                                if (tcsetpgrp(shell_terminal, pi->pgrp) && errno != ENOTTY)
1889                                        perror_msg("tcsetpgrp-3");
1890                                rcode = checkjobs(pi);
1891                                /* move the shell to the foreground */
1892                                if (tcsetpgrp(shell_terminal, getpgid(0)) && errno != ENOTTY)
1893                                        perror_msg("tcsetpgrp-4");
1894                        } else {
1895                                rcode = checkjobs(pi);
1896                        }
1897                        debug_printf("checkjobs returned %d\n",rcode);
1898                }
1899                last_return_code=rcode;
1900#else
1901                if (rcode < -1) {
1902                        last_return_code = -rcode - 2;
1903                        return -2;      /* exit */
1904                }
1905                last_return_code=(rcode == 0) ? 0 : 1;
1906#endif
1907#ifndef __U_BOOT__
1908                pi->num_progs = save_num_progs; /* restore number of programs */
1909#endif
1910                if ( rmode == RES_IF || rmode == RES_ELIF )
1911                        next_if_code=rcode;  /* can be overwritten a number of times */
1912                if (rmode == RES_WHILE)
1913                        flag_rep = !last_return_code;
1914                if (rmode == RES_UNTIL)
1915                        flag_rep = last_return_code;
1916                if ( (rcode==EXIT_SUCCESS && pi->followup==PIPE_OR) ||
1917                     (rcode!=EXIT_SUCCESS && pi->followup==PIPE_AND) )
1918                        skip_more_in_this_rmode=rmode;
1919#ifndef __U_BOOT__
1920                checkjobs(NULL);
1921#endif
1922        }
1923        return rcode;
1924}
1925
1926/* broken, of course, but OK for testing */
1927static char *indenter(int i)
1928{
1929        static char blanks[]="                                    ";
1930        return &blanks[sizeof(blanks)-i-1];
1931}
1932
1933/* return code is the exit status of the pipe */
1934static int free_pipe(struct pipe *pi, int indent)
1935{
1936        char **p;
1937        struct child_prog *child;
1938#ifndef __U_BOOT__
1939        struct redir_struct *r, *rnext;
1940#endif
1941        int a, i, ret_code=0;
1942        char *ind = indenter(indent);
1943
1944#ifndef __U_BOOT__
1945        if (pi->stopped_progs > 0)
1946                return ret_code;
1947        final_printf("%s run pipe: (pid %d)\n",ind,getpid());
1948#endif
1949        for (i=0; i<pi->num_progs; i++) {
1950                child = &pi->progs[i];
1951                final_printf("%s  command %d:\n",ind,i);
1952                if (child->argv) {
1953                        for (a=0,p=child->argv; *p; a++,p++) {
1954                                final_printf("%s   argv[%d] = %s\n",ind,a,*p);
1955                        }
1956#ifndef __U_BOOT__
1957                        globfree(&child->glob_result);
1958#else
1959                        for (a = 0; a < child->argc; a++) {
1960                                free(child->argv[a]);
1961                        }
1962                        free(child->argv);
1963                        free(child->argv_nonnull);
1964                        child->argc = 0;
1965#endif
1966                        child->argv=NULL;
1967                } else if (child->group) {
1968#ifndef __U_BOOT__
1969                        final_printf("%s   begin group (subshell:%d)\n",ind, child->subshell);
1970#endif
1971                        ret_code = free_pipe_list(child->group,indent+3);
1972                        final_printf("%s   end group\n",ind);
1973                } else {
1974                        final_printf("%s   (nil)\n",ind);
1975                }
1976#ifndef __U_BOOT__
1977                for (r=child->redirects; r; r=rnext) {
1978                        final_printf("%s   redirect %d%s", ind, r->fd, redir_table[r->type].descrip);
1979                        if (r->dup == -1) {
1980                                /* guard against the case >$FOO, where foo is unset or blank */
1981                                if (r->word.gl_pathv) {
1982                                        final_printf(" %s\n", *r->word.gl_pathv);
1983                                        globfree(&r->word);
1984                                }
1985                        } else {
1986                                final_printf("&%d\n", r->dup);
1987                        }
1988                        rnext=r->next;
1989                        free(r);
1990                }
1991                child->redirects=NULL;
1992#endif
1993        }
1994        free(pi->progs);   /* children are an array, they get freed all at once */
1995        pi->progs=NULL;
1996        return ret_code;
1997}
1998
1999static int free_pipe_list(struct pipe *head, int indent)
2000{
2001        int rcode=0;   /* if list has no members */
2002        struct pipe *pi, *next;
2003        char *ind = indenter(indent);
2004        for (pi=head; pi; pi=next) {
2005                final_printf("%s pipe reserved mode %d\n", ind, pi->r_mode);
2006                rcode = free_pipe(pi, indent);
2007                final_printf("%s pipe followup code %d\n", ind, pi->followup);
2008                next=pi->next;
2009                pi->next=NULL;
2010                free(pi);
2011        }
2012        return rcode;
2013}
2014
2015/* Select which version we will use */
2016static int run_list(struct pipe *pi)
2017{
2018        int rcode=0;
2019#ifndef __U_BOOT__
2020        if (fake_mode==0) {
2021#endif
2022                rcode = run_list_real(pi);
2023#ifndef __U_BOOT__
2024        }
2025#endif
2026        /* free_pipe_list has the side effect of clearing memory
2027         * In the long run that function can be merged with run_list_real,
2028         * but doing that now would hobble the debugging effort. */
2029        free_pipe_list(pi,0);
2030        return rcode;
2031}
2032
2033/* The API for glob is arguably broken.  This routine pushes a non-matching
2034 * string into the output structure, removing non-backslashed backslashes.
2035 * If someone can prove me wrong, by performing this function within the
2036 * original glob(3) api, feel free to rewrite this routine into oblivion.
2037 * Return code (0 vs. GLOB_NOSPACE) matches glob(3).
2038 * XXX broken if the last character is '\\', check that before calling.
2039 */
2040#ifndef __U_BOOT__
2041static int globhack(const char *src, int flags, glob_t *pglob)
2042{
2043        int cnt=0, pathc;
2044        const char *s;
2045        char *dest;
2046        for (cnt=1, s=src; s && *s; s++) {
2047                if (*s == '\\') s++;
2048                cnt++;
2049        }
2050        dest = malloc(cnt);
2051        if (!dest) return GLOB_NOSPACE;
2052        if (!(flags & GLOB_APPEND)) {
2053                pglob->gl_pathv=NULL;
2054                pglob->gl_pathc=0;
2055                pglob->gl_offs=0;
2056                pglob->gl_offs=0;
2057        }
2058        pathc = ++pglob->gl_pathc;
2059        pglob->gl_pathv = realloc(pglob->gl_pathv, (pathc+1)*sizeof(*pglob->gl_pathv));
2060        if (pglob->gl_pathv == NULL) return GLOB_NOSPACE;
2061        pglob->gl_pathv[pathc-1]=dest;
2062        pglob->gl_pathv[pathc]=NULL;
2063        for (s=src; s && *s; s++, dest++) {
2064                if (*s == '\\') s++;
2065                *dest = *s;
2066        }
2067        *dest='\0';
2068        return 0;
2069}
2070
2071/* XXX broken if the last character is '\\', check that before calling */
2072static int glob_needed(const char *s)
2073{
2074        for (; *s; s++) {
2075                if (*s == '\\') s++;
2076                if (strchr("*[?",*s)) return 1;
2077        }
2078        return 0;
2079}
2080
2081#if 0
2082static void globprint(glob_t *pglob)
2083{
2084        int i;
2085        debug_printf("glob_t at %p:\n", pglob);
2086        debug_printf("  gl_pathc=%d  gl_pathv=%p  gl_offs=%d  gl_flags=%d\n",
2087                pglob->gl_pathc, pglob->gl_pathv, pglob->gl_offs, pglob->gl_flags);
2088        for (i=0; i<pglob->gl_pathc; i++)
2089                debug_printf("pglob->gl_pathv[%d] = %p = %s\n", i,
2090                        pglob->gl_pathv[i], pglob->gl_pathv[i]);
2091}
2092#endif
2093
2094static int xglob(o_string *dest, int flags, glob_t *pglob)
2095{
2096        int gr;
2097
2098        /* short-circuit for null word */
2099        /* we can code this better when the debug_printf's are gone */
2100        if (dest->length == 0) {
2101                if (dest->nonnull) {
2102                        /* bash man page calls this an "explicit" null */
2103                        gr = globhack(dest->data, flags, pglob);
2104                        debug_printf("globhack returned %d\n",gr);
2105                } else {
2106                        return 0;
2107                }
2108        } else if (glob_needed(dest->data)) {
2109                gr = glob(dest->data, flags, NULL, pglob);
2110                debug_printf("glob returned %d\n",gr);
2111                if (gr == GLOB_NOMATCH) {
2112                        /* quote removal, or more accurately, backslash removal */
2113                        gr = globhack(dest->data, flags, pglob);
2114                        debug_printf("globhack returned %d\n",gr);
2115                }
2116        } else {
2117                gr = globhack(dest->data, flags, pglob);
2118                debug_printf("globhack returned %d\n",gr);
2119        }
2120        if (gr == GLOB_NOSPACE)
2121                error_msg_and_die("out of memory during glob");
2122        if (gr != 0) { /* GLOB_ABORTED ? */
2123                error_msg("glob(3) error %d",gr);
2124        }
2125        /* globprint(glob_target); */
2126        return gr;
2127}
2128#endif
2129
2130#ifdef __U_BOOT__
2131static char *get_dollar_var(char ch);
2132#endif
2133
2134/* This is used to get/check local shell variables */
2135char *get_local_var(const char *s)
2136{
2137        struct variables *cur;
2138
2139        if (!s)
2140                return NULL;
2141
2142#ifdef __U_BOOT__
2143        if (*s == '$')
2144                return get_dollar_var(s[1]);
2145#endif
2146
2147        for (cur = top_vars; cur; cur=cur->next)
2148                if(strcmp(cur->name, s)==0)
2149                        return cur->value;
2150        return NULL;
2151}
2152
2153/* This is used to set local shell variables
2154   flg_export==0 if only local (not exporting) variable
2155   flg_export==1 if "new" exporting environ
2156   flg_export>1  if current startup environ (not call putenv()) */
2157int set_local_var(const char *s, int flg_export)
2158{
2159        char *name, *value;
2160        int result=0;
2161        struct variables *cur;
2162
2163#ifdef __U_BOOT__
2164        /* might be possible! */
2165        if (!isalpha(*s))
2166                return -1;
2167#endif
2168
2169        name=strdup(s);
2170
2171        /* Assume when we enter this function that we are already in
2172         * NAME=VALUE format.  So the first order of business is to
2173         * split 's' on the '=' into 'name' and 'value' */
2174        value = strchr(name, '=');
2175        if (value == NULL || *(value + 1) == 0) {
2176                free(name);
2177                return -1;
2178        }
2179        *value++ = 0;
2180
2181        for(cur = top_vars; cur; cur = cur->next) {
2182                if(strcmp(cur->name, name)==0)
2183                        break;
2184        }
2185
2186        if(cur) {
2187                if(strcmp(cur->value, value)==0) {
2188                        if(flg_export>0 && cur->flg_export==0)
2189                                cur->flg_export=flg_export;
2190                        else
2191                                result++;
2192                } else {
2193                        if(cur->flg_read_only) {
2194                                error_msg("%s: readonly variable", name);
2195                                result = -1;
2196                        } else {
2197                                if(flg_export>0 || cur->flg_export>1)
2198                                        cur->flg_export=1;
2199                                free(cur->value);
2200
2201                                cur->value = strdup(value);
2202                        }
2203                }
2204        } else {
2205                cur = malloc(sizeof(struct variables));
2206                if(!cur) {
2207                        result = -1;
2208                } else {
2209                        cur->name = strdup(name);
2210                        if (cur->name == NULL) {
2211                                free(cur);
2212                                result = -1;
2213                        } else {
2214                                struct variables *bottom = top_vars;
2215                                cur->value = strdup(value);
2216                                cur->next = NULL;
2217                                cur->flg_export = flg_export;
2218                                cur->flg_read_only = 0;
2219                                while(bottom->next) bottom=bottom->next;
2220                                bottom->next = cur;
2221                        }
2222                }
2223        }
2224
2225#ifndef __U_BOOT__
2226        if(result==0 && cur->flg_export==1) {
2227                *(value-1) = '=';
2228                result = putenv(name);
2229        } else {
2230#endif
2231                free(name);
2232#ifndef __U_BOOT__
2233                if(result>0)            /* equivalent to previous set */
2234                        result = 0;
2235        }
2236#endif
2237        return result;
2238}
2239
2240void unset_local_var(const char *name)
2241{
2242        struct variables *cur;
2243
2244        if (name) {
2245                for (cur = top_vars; cur; cur=cur->next) {
2246                        if(strcmp(cur->name, name)==0)
2247                                break;
2248                }
2249                if (cur != NULL) {
2250                        struct variables *next = top_vars;
2251                        if(cur->flg_read_only) {
2252                                error_msg("%s: readonly variable", name);
2253                                return;
2254                        } else {
2255#ifndef __U_BOOT__
2256                                if(cur->flg_export)
2257                                        unenv_set(cur->name);
2258#endif
2259                                free(cur->name);
2260                                free(cur->value);
2261                                while (next->next != cur)
2262                                        next = next->next;
2263                                next->next = cur->next;
2264                        }
2265                        free(cur);
2266                }
2267        }
2268}
2269
2270static int is_assignment(const char *s)
2271{
2272        if (s == NULL)
2273                return 0;
2274
2275        if (!isalpha(*s)) return 0;
2276        ++s;
2277        while(isalnum(*s) || *s=='_') ++s;
2278        return *s=='=';
2279}
2280
2281#ifndef __U_BOOT__
2282/* the src parameter allows us to peek forward to a possible &n syntax
2283 * for file descriptor duplication, e.g., "2>&1".
2284 * Return code is 0 normally, 1 if a syntax error is detected in src.
2285 * Resource errors (in xmalloc) cause the process to exit */
2286static int setup_redirect(struct p_context *ctx, int fd, redir_type style,
2287        struct in_str *input)
2288{
2289        struct child_prog *child=ctx->child;
2290        struct redir_struct *redir = child->redirects;
2291        struct redir_struct *last_redir=NULL;
2292
2293        /* Create a new redir_struct and drop it onto the end of the linked list */
2294        while(redir) {
2295                last_redir=redir;
2296                redir=redir->next;
2297        }
2298        redir = xmalloc(sizeof(struct redir_struct));
2299        redir->next=NULL;
2300        redir->word.gl_pathv=NULL;
2301        if (last_redir) {
2302                last_redir->next=redir;
2303        } else {
2304                child->redirects=redir;
2305        }
2306
2307        redir->type=style;
2308        redir->fd= (fd==-1) ? redir_table[style].default_fd : fd ;
2309
2310        debug_printf("Redirect type %d%s\n", redir->fd, redir_table[style].descrip);
2311
2312        /* Check for a '2>&1' type redirect */
2313        redir->dup = redirect_dup_num(input);
2314        if (redir->dup == -2) return 1;  /* syntax error */
2315        if (redir->dup != -1) {
2316                /* Erik had a check here that the file descriptor in question
2317                 * is legit; I postpone that to "run time"
2318                 * A "-" representation of "close me" shows up as a -3 here */
2319                debug_printf("Duplicating redirect '%d>&%d'\n", redir->fd, redir->dup);
2320        } else {
2321                /* We do _not_ try to open the file that src points to,
2322                 * since we need to return and let src be expanded first.
2323                 * Set ctx->pending_redirect, so we know what to do at the
2324                 * end of the next parsed word.
2325                 */
2326                ctx->pending_redirect = redir;
2327        }
2328        return 0;
2329}
2330#endif
2331
2332static struct pipe *new_pipe(void)
2333{
2334        struct pipe *pi;
2335        pi = xmalloc(sizeof(struct pipe));
2336        pi->num_progs = 0;
2337        pi->progs = NULL;
2338        pi->next = NULL;
2339        pi->followup = 0;  /* invalid */
2340        pi->r_mode = RES_NONE;
2341        return pi;
2342}
2343
2344static void initialize_context(struct p_context *ctx)
2345{
2346        ctx->pipe=NULL;
2347#ifndef __U_BOOT__
2348        ctx->pending_redirect=NULL;
2349#endif
2350        ctx->child=NULL;
2351        ctx->list_head=new_pipe();
2352        ctx->pipe=ctx->list_head;
2353        ctx->w=RES_NONE;
2354        ctx->stack=NULL;
2355#ifdef __U_BOOT__
2356        ctx->old_flag=0;
2357#endif
2358        done_command(ctx);   /* creates the memory for working child */
2359}
2360
2361/* normal return is 0
2362 * if a reserved word is found, and processed, return 1
2363 * should handle if, then, elif, else, fi, for, while, until, do, done.
2364 * case, function, and select are obnoxious, save those for later.
2365 */
2366struct reserved_combo {
2367        char *literal;
2368        int code;
2369        long flag;
2370};
2371/* Mostly a list of accepted follow-up reserved words.
2372 * FLAG_END means we are done with the sequence, and are ready
2373 * to turn the compound list into a command.
2374 * FLAG_START means the word must start a new compound list.
2375 */
2376static struct reserved_combo reserved_list[] = {
2377        { "if",    RES_IF,    FLAG_THEN | FLAG_START },
2378        { "then",  RES_THEN,  FLAG_ELIF | FLAG_ELSE | FLAG_FI },
2379        { "elif",  RES_ELIF,  FLAG_THEN },
2380        { "else",  RES_ELSE,  FLAG_FI   },
2381        { "fi",    RES_FI,    FLAG_END  },
2382        { "for",   RES_FOR,   FLAG_IN   | FLAG_START },
2383        { "while", RES_WHILE, FLAG_DO   | FLAG_START },
2384        { "until", RES_UNTIL, FLAG_DO   | FLAG_START },
2385        { "in",    RES_IN,    FLAG_DO   },
2386        { "do",    RES_DO,    FLAG_DONE },
2387        { "done",  RES_DONE,  FLAG_END  }
2388};
2389#define NRES (sizeof(reserved_list)/sizeof(struct reserved_combo))
2390
2391static int reserved_word(o_string *dest, struct p_context *ctx)
2392{
2393        struct reserved_combo *r;
2394        for (r=reserved_list;
2395                r<reserved_list+NRES; r++) {
2396                if (strcmp(dest->data, r->literal) == 0) {
2397                        debug_printf("found reserved word %s, code %d\n",r->literal,r->code);
2398                        if (r->flag & FLAG_START) {
2399                                struct p_context *new = xmalloc(sizeof(struct p_context));
2400                                debug_printf("push stack\n");
2401                                if (ctx->w == RES_IN || ctx->w == RES_FOR) {
2402                                        syntax();
2403                                        free(new);
2404                                        ctx->w = RES_SNTX;
2405                                        b_reset(dest);
2406                                        return 1;
2407                                }
2408                                *new = *ctx;   /* physical copy */
2409                                initialize_context(ctx);
2410                                ctx->stack=new;
2411                        } else if ( ctx->w == RES_NONE || ! (ctx->old_flag & (1<<r->code))) {
2412                                syntax();
2413                                ctx->w = RES_SNTX;
2414                                b_reset(dest);
2415                                return 1;
2416                        }
2417                        ctx->w=r->code;
2418                        ctx->old_flag = r->flag;
2419                        if (ctx->old_flag & FLAG_END) {
2420                                struct p_context *old;
2421                                debug_printf("pop stack\n");
2422                                done_pipe(ctx,PIPE_SEQ);
2423                                old = ctx->stack;
2424                                old->child->group = ctx->list_head;
2425#ifndef __U_BOOT__
2426                                old->child->subshell = 0;
2427#endif
2428                                *ctx = *old;   /* physical copy */
2429                                free(old);
2430                        }
2431                        b_reset (dest);
2432                        return 1;
2433                }
2434        }
2435        return 0;
2436}
2437
2438/* normal return is 0.
2439 * Syntax or xglob errors return 1. */
2440static int done_word(o_string *dest, struct p_context *ctx)
2441{
2442        struct child_prog *child=ctx->child;
2443#ifndef __U_BOOT__
2444        glob_t *glob_target;
2445        int gr, flags = 0;
2446#else
2447        char *str, *s;
2448        int argc, cnt;
2449#endif
2450
2451        debug_printf("done_word: %s %p\n", dest->data, child);
2452        if (dest->length == 0 && !dest->nonnull) {
2453                debug_printf("  true null, ignored\n");
2454                return 0;
2455        }
2456#ifndef __U_BOOT__
2457        if (ctx->pending_redirect) {
2458                glob_target = &ctx->pending_redirect->word;
2459        } else {
2460#endif
2461                if (child->group) {
2462                        syntax();
2463                        return 1;  /* syntax error, groups and arglists don't mix */
2464                }
2465                if (!child->argv && (ctx->type & FLAG_PARSE_SEMICOLON)) {
2466                        debug_printf("checking %s for reserved-ness\n",dest->data);
2467                        if (reserved_word(dest,ctx)) return ctx->w==RES_SNTX;
2468                }
2469#ifndef __U_BOOT__
2470                glob_target = &child->glob_result;
2471                if (child->argv) flags |= GLOB_APPEND;
2472#else
2473                for (cnt = 1, s = dest->data; s && *s; s++) {
2474                        if (*s == '\\') s++;
2475                        cnt++;
2476                }
2477                str = malloc(cnt);
2478                if (!str) return 1;
2479                if ( child->argv == NULL) {
2480                        child->argc=0;
2481                }
2482                argc = ++child->argc;
2483                child->argv = realloc(child->argv, (argc+1)*sizeof(*child->argv));
2484                if (child->argv == NULL) {
2485                        free(str);
2486                        return 1;
2487                }
2488                child->argv_nonnull = realloc(child->argv_nonnull,
2489                                        (argc+1)*sizeof(*child->argv_nonnull));
2490                if (child->argv_nonnull == NULL) {
2491                        free(str);
2492                        return 1;
2493                }
2494                child->argv[argc-1]=str;
2495                child->argv_nonnull[argc-1] = dest->nonnull;
2496                child->argv[argc]=NULL;
2497                child->argv_nonnull[argc] = 0;
2498                for (s = dest->data; s && *s; s++,str++) {
2499                        if (*s == '\\') s++;
2500                        *str = *s;
2501                }
2502                *str = '\0';
2503#endif
2504#ifndef __U_BOOT__
2505        }
2506        gr = xglob(dest, flags, glob_target);
2507        if (gr != 0) return 1;
2508#endif
2509
2510        b_reset(dest);
2511#ifndef __U_BOOT__
2512        if (ctx->pending_redirect) {
2513                ctx->pending_redirect=NULL;
2514                if (glob_target->gl_pathc != 1) {
2515                        error_msg("ambiguous redirect");
2516                        return 1;
2517                }
2518        } else {
2519                child->argv = glob_target->gl_pathv;
2520        }
2521#endif
2522        if (ctx->w == RES_FOR) {
2523                done_word(dest,ctx);
2524                done_pipe(ctx,PIPE_SEQ);
2525        }
2526        return 0;
2527}
2528
2529/* The only possible error here is out of memory, in which case
2530 * xmalloc exits. */
2531static int done_command(struct p_context *ctx)
2532{
2533        /* The child is really already in the pipe structure, so
2534         * advance the pipe counter and make a new, null child.
2535         * Only real trickiness here is that the uncommitted
2536         * child structure, to which ctx->child points, is not
2537         * counted in pi->num_progs. */
2538        struct pipe *pi=ctx->pipe;
2539        struct child_prog *prog=ctx->child;
2540
2541        if (prog && prog->group == NULL
2542                 && prog->argv == NULL
2543#ifndef __U_BOOT__
2544                 && prog->redirects == NULL) {
2545#else
2546                                                                                ) {
2547#endif
2548                debug_printf("done_command: skipping null command\n");
2549                return 0;
2550        } else if (prog) {
2551                pi->num_progs++;
2552                debug_printf("done_command: num_progs incremented to %d\n",pi->num_progs);
2553        } else {
2554                debug_printf("done_command: initializing\n");
2555        }
2556        pi->progs = xrealloc(pi->progs, sizeof(*pi->progs) * (pi->num_progs+1));
2557
2558        prog = pi->progs + pi->num_progs;
2559#ifndef __U_BOOT__
2560        prog->redirects = NULL;
2561#endif
2562        prog->argv = NULL;
2563        prog->argv_nonnull = NULL;
2564#ifndef __U_BOOT__
2565        prog->is_stopped = 0;
2566#endif
2567        prog->group = NULL;
2568#ifndef __U_BOOT__
2569        prog->glob_result.gl_pathv = NULL;
2570        prog->family = pi;
2571#endif
2572        prog->sp = 0;
2573        ctx->child = prog;
2574        prog->type = ctx->type;
2575
2576        /* but ctx->pipe and ctx->list_head remain unchanged */
2577        return 0;
2578}
2579
2580static int done_pipe(struct p_context *ctx, pipe_style type)
2581{
2582        struct pipe *new_p;
2583        done_command(ctx);  /* implicit closure of previous command */
2584        debug_printf("done_pipe, type %d\n", type);
2585        ctx->pipe->followup = type;
2586        ctx->pipe->r_mode = ctx->w;
2587        new_p=new_pipe();
2588        ctx->pipe->next = new_p;
2589        ctx->pipe = new_p;
2590        ctx->child = NULL;
2591        done_command(ctx);  /* set up new pipe to accept commands */
2592        return 0;
2593}
2594
2595#ifndef __U_BOOT__
2596/* peek ahead in the in_str to find out if we have a "&n" construct,
2597 * as in "2>&1", that represents duplicating a file descriptor.
2598 * returns either -2 (syntax error), -1 (no &), or the number found.
2599 */
2600static int redirect_dup_num(struct in_str *input)
2601{
2602        int ch, d=0, ok=0;
2603        ch = b_peek(input);
2604        if (ch != '&') return -1;
2605
2606        b_getch(input);  /* get the & */
2607        ch=b_peek(input);
2608        if (ch == '-') {
2609                b_getch(input);
2610                return -3;  /* "-" represents "close me" */
2611        }
2612        while (isdigit(ch)) {
2613                d = d*10+(ch-'0');
2614                ok=1;
2615                b_getch(input);
2616                ch = b_peek(input);
2617        }
2618        if (ok) return d;
2619
2620        error_msg("ambiguous redirect");
2621        return -2;
2622}
2623
2624/* If a redirect is immediately preceded by a number, that number is
2625 * supposed to tell which file descriptor to redirect.  This routine
2626 * looks for such preceding numbers.  In an ideal world this routine
2627 * needs to handle all the following classes of redirects...
2628 *     echo 2>foo     # redirects fd  2 to file "foo", nothing passed to echo
2629 *     echo 49>foo    # redirects fd 49 to file "foo", nothing passed to echo
2630 *     echo -2>foo    # redirects fd  1 to file "foo",    "-2" passed to echo
2631 *     echo 49x>foo   # redirects fd  1 to file "foo",   "49x" passed to echo
2632 * A -1 output from this program means no valid number was found, so the
2633 * caller should use the appropriate default for this redirection.
2634 */
2635static int redirect_opt_num(o_string *o)
2636{
2637        int num;
2638
2639        if (o->length==0) return -1;
2640        for(num=0; num<o->length; num++) {
2641                if (!isdigit(*(o->data+num))) {
2642                        return -1;
2643                }
2644        }
2645        /* reuse num (and save an int) */
2646        num=atoi(o->data);
2647        b_reset(o);
2648        return num;
2649}
2650
2651FILE *generate_stream_from_list(struct pipe *head)
2652{
2653        FILE *pf;
2654#if 1
2655        int pid, channel[2];
2656        if (pipe(channel)<0) perror_msg_and_die("pipe");
2657        pid=fork();
2658        if (pid<0) {
2659                perror_msg_and_die("fork");
2660        } else if (pid==0) {
2661                close(channel[0]);
2662                if (channel[1] != 1) {
2663                        dup2(channel[1],1);
2664                        close(channel[1]);
2665                }
2666#if 0
2667#define SURROGATE "surrogate response"
2668                write(1,SURROGATE,sizeof(SURROGATE));
2669                _exit(run_list(head));
2670#else
2671                _exit(run_list_real(head));   /* leaks memory */
2672#endif
2673        }
2674        debug_printf("forked child %d\n",pid);
2675        close(channel[1]);
2676        pf = fdopen(channel[0],"r");
2677        debug_printf("pipe on FILE *%p\n",pf);
2678#else
2679        free_pipe_list(head,0);
2680        pf=popen("echo surrogate response","r");
2681        debug_printf("started fake pipe on FILE *%p\n",pf);
2682#endif
2683        return pf;
2684}
2685
2686/* this version hacked for testing purposes */
2687/* return code is exit status of the process that is run. */
2688static int process_command_subs(o_string *dest, struct p_context *ctx, struct in_str *input, int subst_end)
2689{
2690        int retcode;
2691        o_string result=NULL_O_STRING;
2692        struct p_context inner;
2693        FILE *p;
2694        struct in_str pipe_str;
2695        initialize_context(&inner);
2696
2697        /* recursion to generate command */
2698        retcode = parse_stream(&result, &inner, input, subst_end);
2699        if (retcode != 0) return retcode;  /* syntax error or EOF */
2700        done_word(&result, &inner);
2701        done_pipe(&inner, PIPE_SEQ);
2702        b_free(&result);
2703
2704        p=generate_stream_from_list(inner.list_head);
2705        if (p==NULL) return 1;
2706        mark_open(fileno(p));
2707        setup_file_in_str(&pipe_str, p);
2708
2709        /* now send results of command back into original context */
2710        retcode = parse_stream(dest, ctx, &pipe_str, '\0');
2711        /* XXX In case of a syntax error, should we try to kill the child?
2712         * That would be tough to do right, so just read until EOF. */
2713        if (retcode == 1) {
2714                while (b_getch(&pipe_str)!=EOF) { /* discard */ };
2715        }
2716
2717        debug_printf("done reading from pipe, pclose()ing\n");
2718        /* This is the step that wait()s for the child.  Should be pretty
2719         * safe, since we just read an EOF from its stdout.  We could try
2720         * to better, by using wait(), and keeping track of background jobs
2721         * at the same time.  That would be a lot of work, and contrary
2722         * to the KISS philosophy of this program. */
2723        mark_closed(fileno(p));
2724        retcode=pclose(p);
2725        free_pipe_list(inner.list_head,0);
2726        debug_printf("pclosed, retcode=%d\n",retcode);
2727        /* XXX this process fails to trim a single trailing newline */
2728        return retcode;
2729}
2730
2731static int parse_group(o_string *dest, struct p_context *ctx,
2732        struct in_str *input, int ch)
2733{
2734        int rcode, endch=0;
2735        struct p_context sub;
2736        struct child_prog *child = ctx->child;
2737        if (child->argv) {
2738                syntax();
2739                return 1;  /* syntax error, groups and arglists don't mix */
2740        }
2741        initialize_context(&sub);
2742        switch(ch) {
2743                case '(': endch=')'; child->subshell=1; break;
2744                case '{': endch='}'; break;
2745                default: syntax();   /* really logic error */
2746        }
2747        rcode=parse_stream(dest,&sub,input,endch);
2748        done_word(dest,&sub); /* finish off the final word in the subcontext */
2749        done_pipe(&sub, PIPE_SEQ);  /* and the final command there, too */
2750        child->group = sub.list_head;
2751        return rcode;
2752        /* child remains "open", available for possible redirects */
2753}
2754#endif
2755
2756/* basically useful version until someone wants to get fancier,
2757 * see the bash man page under "Parameter Expansion" */
2758static char *lookup_param(char *src)
2759{
2760        char *p;
2761        char *sep;
2762        char *default_val = NULL;
2763        int assign = 0;
2764        int expand_empty = 0;
2765
2766        if (!src)
2767                return NULL;
2768
2769        sep = strchr(src, ':');
2770
2771        if (sep) {
2772                *sep = '\0';
2773                if (*(sep + 1) == '-')
2774                        default_val = sep+2;
2775                if (*(sep + 1) == '=') {
2776                        default_val = sep+2;
2777                        assign = 1;
2778                }
2779                if (*(sep + 1) == '+') {
2780                        default_val = sep+2;
2781                        expand_empty = 1;
2782                }
2783        }
2784
2785        p = env_get(src);
2786        if (!p)
2787                p = get_local_var(src);
2788
2789        if (!p || strlen(p) == 0) {
2790                p = default_val;
2791                if (assign) {
2792                        char *var = malloc(strlen(src)+strlen(default_val)+2);
2793                        if (var) {
2794                                sprintf(var, "%s=%s", src, default_val);
2795                                set_local_var(var, 0);
2796                        }
2797                        free(var);
2798                }
2799        } else if (expand_empty) {
2800                p += strlen(p);
2801        }
2802
2803        if (sep)
2804                *sep = ':';
2805
2806        return p;
2807}
2808
2809#ifdef __U_BOOT__
2810static char *get_dollar_var(char ch)
2811{
2812        static char buf[40];
2813
2814        buf[0] = '\0';
2815        switch (ch) {
2816                case '?':
2817                        sprintf(buf, "%u", (unsigned int)last_return_code);
2818                        break;
2819                default:
2820                        return NULL;
2821        }
2822        return buf;
2823}
2824#endif
2825
2826/* return code: 0 for OK, 1 for syntax error */
2827static int handle_dollar(o_string *dest, struct p_context *ctx, struct in_str *input)
2828{
2829#ifndef __U_BOOT__
2830        int i, advance=0;
2831#else
2832        int advance=0;
2833#endif
2834#ifndef __U_BOOT__
2835        char sep[]=" ";
2836#endif
2837        int ch = input->peek(input);  /* first character after the $ */
2838        debug_printf("handle_dollar: ch=%c\n",ch);
2839        if (isalpha(ch)) {
2840                b_addchr(dest, SPECIAL_VAR_SYMBOL);
2841                ctx->child->sp++;
2842                while(ch=b_peek(input),isalnum(ch) || ch=='_') {
2843                        b_getch(input);
2844                        b_addchr(dest,ch);
2845                }
2846                b_addchr(dest, SPECIAL_VAR_SYMBOL);
2847#ifndef __U_BOOT__
2848        } else if (isdigit(ch)) {
2849                i = ch-'0';  /* XXX is $0 special? */
2850                if (i<global_argc) {
2851                        parse_string(dest, ctx, global_argv[i]); /* recursion */
2852                }
2853                advance = 1;
2854#endif
2855        } else switch (ch) {
2856#ifndef __U_BOOT__
2857                case '$':
2858                        b_adduint(dest,getpid());
2859                        advance = 1;
2860                        break;
2861                case '!':
2862                        if (last_bg_pid > 0) b_adduint(dest, last_bg_pid);
2863                        advance = 1;
2864                        break;
2865#endif
2866                case '?':
2867#ifndef __U_BOOT__
2868                        b_adduint(dest,last_return_code);
2869#else
2870                        ctx->child->sp++;
2871                        b_addchr(dest, SPECIAL_VAR_SYMBOL);
2872                        b_addchr(dest, '$');
2873                        b_addchr(dest, '?');
2874                        b_addchr(dest, SPECIAL_VAR_SYMBOL);
2875#endif
2876                        advance = 1;
2877                        break;
2878#ifndef __U_BOOT__
2879                case '#':
2880                        b_adduint(dest,global_argc ? global_argc-1 : 0);
2881                        advance = 1;
2882                        break;
2883#endif
2884                case '{':
2885                        b_addchr(dest, SPECIAL_VAR_SYMBOL);
2886                        ctx->child->sp++;
2887                        b_getch(input);
2888                        /* XXX maybe someone will try to escape the '}' */
2889                        while(ch=b_getch(input),ch!=EOF && ch!='}') {
2890                                b_addchr(dest,ch);
2891                        }
2892                        if (ch != '}') {
2893                                syntax();
2894                                return 1;
2895                        }
2896                        b_addchr(dest, SPECIAL_VAR_SYMBOL);
2897                        break;
2898#ifndef __U_BOOT__
2899                case '(':
2900                        b_getch(input);
2901                        process_command_subs(dest, ctx, input, ')');
2902                        break;
2903                case '*':
2904                        sep[0]=ifs[0];
2905                        for (i=1; i<global_argc; i++) {
2906                                parse_string(dest, ctx, global_argv[i]);
2907                                if (i+1 < global_argc) parse_string(dest, ctx, sep);
2908                        }
2909                        break;
2910                case '@':
2911                case '-':
2912                case '_':
2913                        /* still unhandled, but should be eventually */
2914                        error_msg("unhandled syntax: $%c",ch);
2915                        return 1;
2916                        break;
2917#endif
2918                default:
2919                        b_addqchr(dest,'$',dest->quote);
2920        }
2921        /* Eat the character if the flag was set.  If the compiler
2922         * is smart enough, we could substitute "b_getch(input);"
2923         * for all the "advance = 1;" above, and also end up with
2924         * a nice size-optimized program.  Hah!  That'll be the day.
2925         */
2926        if (advance) b_getch(input);
2927        return 0;
2928}
2929
2930#ifndef __U_BOOT__
2931int parse_string(o_string *dest, struct p_context *ctx, const char *src)
2932{
2933        struct in_str foo;
2934        setup_string_in_str(&foo, src);
2935        return parse_stream(dest, ctx, &foo, '\0');
2936}
2937#endif
2938
2939/* return code is 0 for normal exit, 1 for syntax error */
2940static int parse_stream(o_string *dest, struct p_context *ctx,
2941                        struct in_str *input, int end_trigger)
2942{
2943        unsigned int ch, m;
2944#ifndef __U_BOOT__
2945        int redir_fd;
2946        redir_type redir_style;
2947#endif
2948        int next;
2949
2950        /* Only double-quote state is handled in the state variable dest->quote.
2951         * A single-quote triggers a bypass of the main loop until its mate is
2952         * found.  When recursing, quote state is passed in via dest->quote. */
2953
2954        debug_printf("parse_stream, end_trigger=%d\n",end_trigger);
2955        while ((ch=b_getch(input))!=EOF) {
2956                m = map[ch];
2957#ifdef __U_BOOT__
2958                if (input->__promptme == 0) return 1;
2959#endif
2960                next = (ch == '\n') ? 0 : b_peek(input);
2961
2962                debug_printf("parse_stream: ch=%c (%d) m=%d quote=%d - %c\n",
2963                        ch >= ' ' ? ch : '.', ch, m,
2964                        dest->quote, ctx->stack == NULL ? '*' : '.');
2965
2966                if (m==0 || ((m==1 || m==2) && dest->quote)) {
2967                        b_addqchr(dest, ch, dest->quote);
2968                } else {
2969                        if (m==2) {  /* unquoted IFS */
2970                                if (done_word(dest, ctx)) {
2971                                        return 1;
2972                                }
2973                                /* If we aren't performing a substitution, treat a newline as a
2974                                 * command separator.  */
2975                                if (end_trigger != '\0' && ch=='\n')
2976                                        done_pipe(ctx,PIPE_SEQ);
2977                        }
2978                        if (ch == end_trigger && !dest->quote && ctx->w==RES_NONE) {
2979                                debug_printf("leaving parse_stream (triggered)\n");
2980                                return 0;
2981                        }
2982#if 0
2983                        if (ch=='\n') {
2984                                /* Yahoo!  Time to run with it! */
2985                                done_pipe(ctx,PIPE_SEQ);
2986                                run_list(ctx->list_head);
2987                                initialize_context(ctx);
2988                        }
2989#endif
2990                        if (m!=2) switch (ch) {
2991                case '#':
2992                        if (dest->length == 0 && !dest->quote) {
2993                                while(ch=b_peek(input),ch!=EOF && ch!='\n') { b_getch(input); }
2994                        } else {
2995                                b_addqchr(dest, ch, dest->quote);
2996                        }
2997                        break;
2998                case '\\':
2999                        if (next == EOF) {
3000                                syntax();
3001                                return 1;
3002                        }
3003                        b_addqchr(dest, '\\', dest->quote);
3004                        b_addqchr(dest, b_getch(input), dest->quote);
3005                        break;
3006                case '$':
3007                        if (handle_dollar(dest, ctx, input)!=0) return 1;
3008                        break;
3009                case '\'':
3010                        dest->nonnull = 1;
3011                        while(ch=b_getch(input),ch!=EOF && ch!='\'') {
3012#ifdef __U_BOOT__
3013                                if(input->__promptme == 0) return 1;
3014#endif
3015                                b_addchr(dest,ch);
3016                        }
3017                        if (ch==EOF) {
3018                                syntax();
3019                                return 1;
3020                        }
3021                        break;
3022                case '"':
3023                        dest->nonnull = 1;
3024                        dest->quote = !dest->quote;
3025                        break;
3026#ifndef __U_BOOT__
3027                case '`':
3028                        process_command_subs(dest, ctx, input, '`');
3029                        break;
3030                case '>':
3031                        redir_fd = redirect_opt_num(dest);
3032                        done_word(dest, ctx);
3033                        redir_style=REDIRECT_OVERWRITE;
3034                        if (next == '>') {
3035                                redir_style=REDIRECT_APPEND;
3036                                b_getch(input);
3037                        } else if (next == '(') {
3038                                syntax();   /* until we support >(list) Process Substitution */
3039                                return 1;
3040                        }
3041                        setup_redirect(ctx, redir_fd, redir_style, input);
3042                        break;
3043                case '<':
3044                        redir_fd = redirect_opt_num(dest);
3045                        done_word(dest, ctx);
3046                        redir_style=REDIRECT_INPUT;
3047                        if (next == '<') {
3048                                redir_style=REDIRECT_HEREIS;
3049                                b_getch(input);
3050                        } else if (next == '>') {
3051                                redir_style=REDIRECT_IO;
3052                                b_getch(input);
3053                        } else if (next == '(') {
3054                                syntax();   /* until we support <(list) Process Substitution */
3055                                return 1;
3056                        }
3057                        setup_redirect(ctx, redir_fd, redir_style, input);
3058                        break;
3059#endif
3060                case ';':
3061                        done_word(dest, ctx);
3062                        done_pipe(ctx,PIPE_SEQ);
3063                        break;
3064                case '&':
3065                        done_word(dest, ctx);
3066                        if (next=='&') {
3067                                b_getch(input);
3068                                done_pipe(ctx,PIPE_AND);
3069                        } else {
3070#ifndef __U_BOOT__
3071                                done_pipe(ctx,PIPE_BG);
3072#else
3073                                syntax_err();
3074                                return 1;
3075#endif
3076                        }
3077                        break;
3078                case '|':
3079                        done_word(dest, ctx);
3080                        if (next=='|') {
3081                                b_getch(input);
3082                                done_pipe(ctx,PIPE_OR);
3083                        } else {
3084                                /* we could pick up a file descriptor choice here
3085                                 * with redirect_opt_num(), but bash doesn't do it.
3086                                 * "echo foo 2| cat" yields "foo 2". */
3087#ifndef __U_BOOT__
3088                                done_command(ctx);
3089#else
3090                                syntax_err();
3091                                return 1;
3092#endif
3093                        }
3094                        break;
3095#ifndef __U_BOOT__
3096                case '(':
3097                case '{':
3098                        if (parse_group(dest, ctx, input, ch)!=0) return 1;
3099                        break;
3100                case ')':
3101                case '}':
3102                        syntax();   /* Proper use of this character caught by end_trigger */
3103                        return 1;
3104                        break;
3105#endif
3106                case SUBSTED_VAR_SYMBOL:
3107                        dest->nonnull = 1;
3108                        while (ch = b_getch(input), ch != EOF &&
3109                            ch != SUBSTED_VAR_SYMBOL) {
3110                                debug_printf("subst, pass=%d\n", ch);
3111                                if (input->__promptme == 0)
3112                                        return 1;
3113                                b_addchr(dest, ch);
3114                        }
3115                        debug_printf("subst, term=%d\n", ch);
3116                        if (ch == EOF) {
3117                                syntax();
3118                                return 1;
3119                        }
3120                        break;
3121                default:
3122                        syntax();   /* this is really an internal logic error */
3123                        return 1;
3124                        }
3125                }
3126        }
3127        /* complain if quote?  No, maybe we just finished a command substitution
3128         * that was quoted.  Example:
3129         * $ echo "`cat foo` plus more"
3130         * and we just got the EOF generated by the subshell that ran "cat foo"
3131         * The only real complaint is if we got an EOF when end_trigger != '\0',
3132         * that is, we were really supposed to get end_trigger, and never got
3133         * one before the EOF.  Can't use the standard "syntax error" return code,
3134         * so that parse_stream_outer can distinguish the EOF and exit smoothly. */
3135        debug_printf("leaving parse_stream (EOF)\n");
3136        if (end_trigger != '\0') return -1;
3137        return 0;
3138}
3139
3140static void mapset(const unsigned char *set, int code)
3141{
3142        const unsigned char *s;
3143        for (s=set; *s; s++) map[*s] = code;
3144}
3145
3146static void update_ifs_map(void)
3147{
3148        /* char *ifs and char map[256] are both globals. */
3149        ifs = (uchar *)env_get("IFS");
3150        if (ifs == NULL) ifs=(uchar *)" \t\n";
3151        /* Precompute a list of 'flow through' behavior so it can be treated
3152         * quickly up front.  Computation is necessary because of IFS.
3153         * Special case handling of IFS == " \t\n" is not implemented.
3154         * The map[] array only really needs two bits each, and on most machines
3155         * that would be faster because of the reduced L1 cache footprint.
3156         */
3157        memset(map,0,sizeof(map)); /* most characters flow through always */
3158#ifndef __U_BOOT__
3159        mapset((uchar *)"\\$'\"`", 3);      /* never flow through */
3160        mapset((uchar *)"<>;&|(){}#", 1);   /* flow through if quoted */
3161#else
3162        {
3163                uchar subst[2] = {SUBSTED_VAR_SYMBOL, 0};
3164                mapset(subst, 3);       /* never flow through */
3165        }
3166        mapset((uchar *)"\\$'\"", 3);       /* never flow through */
3167        mapset((uchar *)";&|#", 1);         /* flow through if quoted */
3168#endif
3169        mapset(ifs, 2);            /* also flow through if quoted */
3170}
3171
3172/* most recursion does not come through here, the exeception is
3173 * from builtin_source() */
3174static int parse_stream_outer(struct in_str *inp, int flag)
3175{
3176
3177        struct p_context ctx;
3178        o_string temp=NULL_O_STRING;
3179        int rcode;
3180#ifdef __U_BOOT__
3181        int code = 1;
3182#endif
3183        do {
3184                ctx.type = flag;
3185                initialize_context(&ctx);
3186                update_ifs_map();
3187                if (!(flag & FLAG_PARSE_SEMICOLON) || (flag & FLAG_REPARSING)) mapset((uchar *)";$&|", 0);
3188                inp->promptmode=1;
3189                rcode = parse_stream(&temp, &ctx, inp,
3190                                     flag & FLAG_CONT_ON_NEWLINE ? -1 : '\n');
3191#ifdef __U_BOOT__
3192                if (rcode == 1) flag_repeat = 0;
3193#endif
3194                if (rcode != 1 && ctx.old_flag != 0) {
3195                        syntax();
3196#ifdef __U_BOOT__
3197                        flag_repeat = 0;
3198#endif
3199                }
3200                if (rcode != 1 && ctx.old_flag == 0) {
3201                        done_word(&temp, &ctx);
3202                        done_pipe(&ctx,PIPE_SEQ);
3203#ifndef __U_BOOT__
3204                        run_list(ctx.list_head);
3205#else
3206                        code = run_list(ctx.list_head);
3207                        if (code == -2) {       /* exit */
3208                                b_free(&temp);
3209                                code = 0;
3210                                /* XXX hackish way to not allow exit from main loop */
3211                                if (inp->peek == file_peek) {
3212                                        printf("exit not allowed from main input shell.\n");
3213                                        continue;
3214                                }
3215                                break;
3216                        }
3217                        if (code == -1)
3218                            flag_repeat = 0;
3219#endif
3220                } else {
3221                        if (ctx.old_flag != 0) {
3222                                free(ctx.stack);
3223                                b_reset(&temp);
3224                        }
3225#ifdef __U_BOOT__
3226                        if (inp->__promptme == 0) printf("<INTERRUPT>\n");
3227                        inp->__promptme = 1;
3228#endif
3229                        temp.nonnull = 0;
3230                        temp.quote = 0;
3231                        inp->p = NULL;
3232                        free_pipe_list(ctx.list_head,0);
3233                }
3234                b_free(&temp);
3235        /* loop on syntax errors, return on EOF */
3236        } while (rcode != -1 && !(flag & FLAG_EXIT_FROM_LOOP) &&
3237                (inp->peek != static_peek || b_peek(inp)));
3238#ifndef __U_BOOT__
3239        return 0;
3240#else
3241        return (code != 0) ? 1 : 0;
3242#endif /* __U_BOOT__ */
3243}
3244
3245#ifndef __U_BOOT__
3246static int parse_string_outer(const char *s, int flag)
3247#else
3248int parse_string_outer(const char *s, int flag)
3249#endif  /* __U_BOOT__ */
3250{
3251        struct in_str input;
3252#ifdef __U_BOOT__
3253        char *p = NULL;
3254        int rcode;
3255        if (!s)
3256                return 1;
3257        if (!*s)
3258                return 0;
3259        if (!(p = strchr(s, '\n')) || *++p) {
3260                p = xmalloc(strlen(s) + 2);
3261                strcpy(p, s);
3262                strcat(p, "\n");
3263                setup_string_in_str(&input, p);
3264                rcode = parse_stream_outer(&input, flag);
3265                free(p);
3266                return rcode;
3267        } else {
3268#endif
3269        setup_string_in_str(&input, s);
3270        return parse_stream_outer(&input, flag);
3271#ifdef __U_BOOT__
3272        }
3273#endif
3274}
3275
3276#ifndef __U_BOOT__
3277static int parse_file_outer(FILE *f)
3278#else
3279int parse_file_outer(void)
3280#endif
3281{
3282        int rcode;
3283        struct in_str input;
3284#ifndef __U_BOOT__
3285        setup_file_in_str(&input, f);
3286#else
3287        setup_file_in_str(&input);
3288#endif
3289        rcode = parse_stream_outer(&input, FLAG_PARSE_SEMICOLON);
3290        return rcode;
3291}
3292
3293#ifdef __U_BOOT__
3294#ifdef CONFIG_NEEDS_MANUAL_RELOC
3295static void u_boot_hush_reloc(void)
3296{
3297        unsigned long addr;
3298        struct reserved_combo *r;
3299
3300        for (r=reserved_list; r<reserved_list+NRES; r++) {
3301                addr = (ulong) (r->literal) + gd->reloc_off;
3302                r->literal = (char *)addr;
3303        }
3304}
3305#endif
3306
3307int u_boot_hush_start(void)
3308{
3309        if (top_vars == NULL) {
3310                top_vars = malloc(sizeof(struct variables));
3311                top_vars->name = "HUSH_VERSION";
3312                top_vars->value = "0.01";
3313                top_vars->next = NULL;
3314                top_vars->flg_export = 0;
3315                top_vars->flg_read_only = 1;
3316#ifdef CONFIG_NEEDS_MANUAL_RELOC
3317                u_boot_hush_reloc();
3318#endif
3319        }
3320        return 0;
3321}
3322
3323static void *xmalloc(size_t size)
3324{
3325        void *p = NULL;
3326
3327        if (!(p = malloc(size))) {
3328            printf("ERROR : xmalloc failed\n");
3329            for(;;);
3330        }
3331        return p;
3332}
3333
3334static void *xrealloc(void *ptr, size_t size)
3335{
3336        void *p = NULL;
3337
3338        if (!(p = realloc(ptr, size))) {
3339            printf("ERROR : xrealloc failed\n");
3340            for(;;);
3341        }
3342        return p;
3343}
3344#endif /* __U_BOOT__ */
3345
3346#ifndef __U_BOOT__
3347/* Make sure we have a controlling tty.  If we get started under a job
3348 * aware app (like bash for example), make sure we are now in charge so
3349 * we don't fight over who gets the foreground */
3350static void setup_job_control(void)
3351{
3352        static pid_t shell_pgrp;
3353        /* Loop until we are in the foreground.  */
3354        while (tcgetpgrp (shell_terminal) != (shell_pgrp = getpgrp ()))
3355                kill (- shell_pgrp, SIGTTIN);
3356
3357        /* Ignore interactive and job-control signals.  */
3358        signal(SIGINT, SIG_IGN);
3359        signal(SIGQUIT, SIG_IGN);
3360        signal(SIGTERM, SIG_IGN);
3361        signal(SIGTSTP, SIG_IGN);
3362        signal(SIGTTIN, SIG_IGN);
3363        signal(SIGTTOU, SIG_IGN);
3364        signal(SIGCHLD, SIG_IGN);
3365
3366        /* Put ourselves in our own process group.  */
3367        setsid();
3368        shell_pgrp = getpid ();
3369        setpgid (shell_pgrp, shell_pgrp);
3370
3371        /* Grab control of the terminal.  */
3372        tcsetpgrp(shell_terminal, shell_pgrp);
3373}
3374
3375int hush_main(int argc, char * const *argv)
3376{
3377        int opt;
3378        FILE *input;
3379        char **e = environ;
3380
3381        /* XXX what should these be while sourcing /etc/profile? */
3382        global_argc = argc;
3383        global_argv = argv;
3384
3385        /* (re?) initialize globals.  Sometimes hush_main() ends up calling
3386         * hush_main(), therefore we cannot rely on the BSS to zero out this
3387         * stuff.  Reset these to 0 every time. */
3388        ifs = NULL;
3389        /* map[] is taken care of with call to update_ifs_map() */
3390        fake_mode = 0;
3391        interactive = 0;
3392        close_me_head = NULL;
3393        last_bg_pid = 0;
3394        job_list = NULL;
3395        last_jobid = 0;
3396
3397        /* Initialize some more globals to non-zero values */
3398        set_cwd();
3399#ifdef CONFIG_FEATURE_COMMAND_EDITING
3400        cmdedit_set_initial_prompt();
3401#else
3402        PS1 = NULL;
3403#endif
3404        PS2 = "> ";
3405
3406        /* initialize our shell local variables with the values
3407         * currently living in the environment */
3408        if (e) {
3409                for (; *e; e++)
3410                        set_local_var(*e, 2);   /* without call putenv() */
3411        }
3412
3413        last_return_code=EXIT_SUCCESS;
3414
3415
3416        if (argv[0] && argv[0][0] == '-') {
3417                debug_printf("\nsourcing /etc/profile\n");
3418                if ((input = fopen("/etc/profile", "r")) != NULL) {
3419                        mark_open(fileno(input));
3420                        parse_file_outer(input);
3421                        mark_closed(fileno(input));
3422                        fclose(input);
3423                }
3424        }
3425        input=stdin;
3426
3427        while ((opt = getopt(argc, argv, "c:xif")) > 0) {
3428                switch (opt) {
3429                        case 'c':
3430                                {
3431                                        global_argv = argv+optind;
3432                                        global_argc = argc-optind;
3433                                        opt = parse_string_outer(optarg, FLAG_PARSE_SEMICOLON);
3434                                        goto final_return;
3435                                }
3436                                break;
3437                        case 'i':
3438                                interactive++;
3439                                break;
3440                        case 'f':
3441                                fake_mode++;
3442                                break;
3443                        default:
3444#ifndef BB_VER
3445                                fprintf(stderr, "Usage: sh [FILE]...\n"
3446                                                "   or: sh -c command [args]...\n\n");
3447                                exit(EXIT_FAILURE);
3448#else
3449                                show_usage();
3450#endif
3451                }
3452        }
3453        /* A shell is interactive if the `-i' flag was given, or if all of
3454         * the following conditions are met:
3455         *        no -c command
3456         *    no arguments remaining or the -s flag given
3457         *    standard input is a terminal
3458         *    standard output is a terminal
3459         *    Refer to Posix.2, the description of the `sh' utility. */
3460        if (argv[optind]==NULL && input==stdin &&
3461                        isatty(fileno(stdin)) && isatty(fileno(stdout))) {
3462                interactive++;
3463        }
3464
3465        debug_printf("\ninteractive=%d\n", interactive);
3466        if (interactive) {
3467                /* Looks like they want an interactive shell */
3468#ifndef CONFIG_FEATURE_SH_EXTRA_QUIET
3469                printf( "\n\n" BB_BANNER " hush - the humble shell v0.01 (testing)\n");
3470                printf( "Enter 'help' for a list of built-in commands.\n\n");
3471#endif
3472                setup_job_control();
3473        }
3474
3475        if (argv[optind]==NULL) {
3476                opt=parse_file_outer(stdin);
3477                goto final_return;
3478        }
3479
3480        debug_printf("\nrunning script '%s'\n", argv[optind]);
3481        global_argv = argv+optind;
3482        global_argc = argc-optind;
3483        input = xfopen(argv[optind], "r");
3484        opt = parse_file_outer(input);
3485
3486#ifdef CONFIG_FEATURE_CLEAN_UP
3487        fclose(input);
3488        if (cwd && cwd != unknown)
3489                free((char*)cwd);
3490        {
3491                struct variables *cur, *tmp;
3492                for(cur = top_vars; cur; cur = tmp) {
3493                        tmp = cur->next;
3494                        if (!cur->flg_read_only) {
3495                                free(cur->name);
3496                                free(cur->value);
3497                                free(cur);
3498                        }
3499                }
3500        }
3501#endif
3502
3503final_return:
3504        return(opt?opt:last_return_code);
3505}
3506#endif
3507
3508static char *insert_var_value(char *inp)
3509{
3510        return insert_var_value_sub(inp, 0);
3511}
3512
3513static char *insert_var_value_sub(char *inp, int tag_subst)
3514{
3515        int res_str_len = 0;
3516        int len;
3517        int done = 0;
3518        char *p, *p1, *res_str = NULL;
3519
3520        while ((p = strchr(inp, SPECIAL_VAR_SYMBOL))) {
3521                /* check the beginning of the string for normal characters */
3522                if (p != inp) {
3523                        /* copy any characters to the result string */
3524                        len = p - inp;
3525                        res_str = xrealloc(res_str, (res_str_len + len));
3526                        strncpy((res_str + res_str_len), inp, len);
3527                        res_str_len += len;
3528                }
3529                inp = ++p;
3530                /* find the ending marker */
3531                p = strchr(inp, SPECIAL_VAR_SYMBOL);
3532                *p = '\0';
3533                /* look up the value to substitute */
3534                if ((p1 = lookup_param(inp))) {
3535                        if (tag_subst)
3536                                len = res_str_len + strlen(p1) + 2;
3537                        else
3538                                len = res_str_len + strlen(p1);
3539                        res_str = xrealloc(res_str, (1 + len));
3540                        if (tag_subst) {
3541                                /*
3542                                 * copy the variable value to the result
3543                                 * string
3544                                 */
3545                                strcpy((res_str + res_str_len + 1), p1);
3546
3547                                /*
3548                                 * mark the replaced text to be accepted as
3549                                 * is
3550                                 */
3551                                res_str[res_str_len] = SUBSTED_VAR_SYMBOL;
3552                                res_str[res_str_len + 1 + strlen(p1)] =
3553                                        SUBSTED_VAR_SYMBOL;
3554                        } else
3555                                /*
3556                                 * copy the variable value to the result
3557                                 * string
3558                                 */
3559                                strcpy((res_str + res_str_len), p1);
3560
3561                        res_str_len = len;
3562                }
3563                *p = SPECIAL_VAR_SYMBOL;
3564                inp = ++p;
3565                done = 1;
3566        }
3567        if (done) {
3568                res_str = xrealloc(res_str, (1 + res_str_len + strlen(inp)));
3569                strcpy((res_str + res_str_len), inp);
3570                while ((p = strchr(res_str, '\n'))) {
3571                        *p = ' ';
3572                }
3573        }
3574        return (res_str == NULL) ? inp : res_str;
3575}
3576
3577static char **make_list_in(char **inp, char *name)
3578{
3579        int len, i;
3580        int name_len = strlen(name);
3581        int n = 0;
3582        char **list;
3583        char *p1, *p2, *p3;
3584
3585        /* create list of variable values */
3586        list = xmalloc(sizeof(*list));
3587        for (i = 0; inp[i]; i++) {
3588                p3 = insert_var_value(inp[i]);
3589                p1 = p3;
3590                while (*p1) {
3591                        if (*p1 == ' ') {
3592                                p1++;
3593                                continue;
3594                        }
3595                        if ((p2 = strchr(p1, ' '))) {
3596                                len = p2 - p1;
3597                        } else {
3598                                len = strlen(p1);
3599                                p2 = p1 + len;
3600                        }
3601                        /* we use n + 2 in realloc for list,because we add
3602                         * new element and then we will add NULL element */
3603                        list = xrealloc(list, sizeof(*list) * (n + 2));
3604                        list[n] = xmalloc(2 + name_len + len);
3605                        strcpy(list[n], name);
3606                        strcat(list[n], "=");
3607                        strncat(list[n], p1, len);
3608                        list[n++][name_len + len + 1] = '\0';
3609                        p1 = p2;
3610                }
3611                if (p3 != inp[i]) free(p3);
3612        }
3613        list[n] = NULL;
3614        return list;
3615}
3616
3617/*
3618 * Make new string for parser
3619 * inp     - array of argument strings to flatten
3620 * nonnull - indicates argument was quoted when originally parsed
3621 */
3622static char *make_string(char **inp, int *nonnull)
3623{
3624        char *p;
3625        char *str = NULL;
3626        int n;
3627        int len = 2;
3628        char *noeval_str;
3629        int noeval = 0;
3630
3631        noeval_str = get_local_var("HUSH_NO_EVAL");
3632        if (noeval_str != NULL && *noeval_str != '0' && *noeval_str != '\0')
3633                noeval = 1;
3634        for (n = 0; inp[n]; n++) {
3635                p = insert_var_value_sub(inp[n], noeval);
3636                str = xrealloc(str, (len + strlen(p) + (2 * nonnull[n])));
3637                if (n) {
3638                        strcat(str, " ");
3639                } else {
3640                        *str = '\0';
3641                }
3642                if (nonnull[n])
3643                        strcat(str, "'");
3644                strcat(str, p);
3645                if (nonnull[n])
3646                        strcat(str, "'");
3647                len = strlen(str) + 3;
3648                if (p != inp[n]) free(p);
3649        }
3650        len = strlen(str);
3651        *(str + len) = '\n';
3652        *(str + len + 1) = '\0';
3653        return str;
3654}
3655
3656#ifdef __U_BOOT__
3657static int do_showvar(struct cmd_tbl *cmdtp, int flag, int argc,
3658                      char *const argv[])
3659{
3660        int i, k;
3661        int rcode = 0;
3662        struct variables *cur;
3663
3664        if (argc == 1) {                /* Print all env variables      */
3665                for (cur = top_vars; cur; cur = cur->next) {
3666                        printf ("%s=%s\n", cur->name, cur->value);
3667                        if (ctrlc ()) {
3668                                puts ("\n ** Abort\n");
3669                                return 1;
3670                        }
3671                }
3672                return 0;
3673        }
3674        for (i = 1; i < argc; ++i) {    /* print single env variables   */
3675                char *name = argv[i];
3676
3677                k = -1;
3678                for (cur = top_vars; cur; cur = cur->next) {
3679                        if(strcmp (cur->name, name) == 0) {
3680                                k = 0;
3681                                printf ("%s=%s\n", cur->name, cur->value);
3682                        }
3683                        if (ctrlc ()) {
3684                                puts ("\n ** Abort\n");
3685                                return 1;
3686                        }
3687                }
3688                if (k < 0) {
3689                        printf ("## Error: \"%s\" not defined\n", name);
3690                        rcode ++;
3691                }
3692        }
3693        return rcode;
3694}
3695
3696U_BOOT_CMD(
3697        showvar, CONFIG_SYS_MAXARGS, 1, do_showvar,
3698        "print local hushshell variables",
3699        "\n    - print values of all hushshell variables\n"
3700        "showvar name ...\n"
3701        "    - print value of hushshell variable 'name'"
3702);
3703
3704#endif
3705/****************************************************************************/
3706