uboot/drivers/mtd/nand/raw/mxc_nand.h
<<
>>
Prefs
   1/* SPDX-License-Identifier: GPL-2.0+ */
   2/*
   3 * (c) 2009 Magnus Lilja <lilja.magnus@gmail.com>
   4 */
   5
   6#ifndef __MXC_NAND_H
   7#define __MXC_NAND_H
   8
   9/*
  10 * Register map and bit definitions for the Freescale NAND Flash Controller
  11 * present in various i.MX devices.
  12 *
  13 * MX31 and MX27 have version 1, which has:
  14 *      4 512-byte main buffers and
  15 *      4 16-byte spare buffers
  16 *      to support up to 2K byte pagesize nand.
  17 *      Reading or writing a 2K page requires 4 FDI/FDO cycles.
  18 *
  19 * MX25 and MX35 have version 2.1, and MX51 and MX53 have version 3.2, which
  20 * have:
  21 *      8 512-byte main buffers and
  22 *      8 64-byte spare buffers
  23 *      to support up to 4K byte pagesize nand.
  24 *      Reading or writing a 2K or 4K page requires only 1 FDI/FDO cycle.
  25 *      Also some of registers are moved and/or changed meaning as seen below.
  26 */
  27#if defined(CONFIG_MX27) || defined(CONFIG_MX31)
  28#define MXC_NFC_V1
  29#define is_mxc_nfc_1()          1
  30#define is_mxc_nfc_21()         0
  31#define is_mxc_nfc_32()         0
  32#elif defined(CONFIG_MX51) || defined(CONFIG_MX53)
  33#define MXC_NFC_V3
  34#define MXC_NFC_V3_2
  35#define is_mxc_nfc_1()          0
  36#define is_mxc_nfc_21()         0
  37#define is_mxc_nfc_32()         1
  38#else
  39#error "MXC NFC implementation not supported"
  40#endif
  41#define is_mxc_nfc_3()          is_mxc_nfc_32()
  42
  43#if defined(MXC_NFC_V1)
  44#define NAND_MXC_NR_BUFS                4
  45#define NAND_MXC_SPARE_BUF_SIZE         16
  46#define NAND_MXC_REG_OFFSET             0xe00
  47#define NAND_MXC_2K_MULTI_CYCLE
  48#elif defined(MXC_NFC_V2_1) || defined(MXC_NFC_V3_2)
  49#define NAND_MXC_NR_BUFS                8
  50#define NAND_MXC_SPARE_BUF_SIZE         64
  51#define NAND_MXC_REG_OFFSET             0x1e00
  52#endif
  53
  54struct mxc_nand_regs {
  55        u8 main_area[NAND_MXC_NR_BUFS][0x200];
  56        u8 spare_area[NAND_MXC_NR_BUFS][NAND_MXC_SPARE_BUF_SIZE];
  57        /*
  58         * reserved size is offset of nfc registers
  59         * minus total main and spare sizes
  60         */
  61        u8 reserved1[NAND_MXC_REG_OFFSET
  62                - NAND_MXC_NR_BUFS * (512 + NAND_MXC_SPARE_BUF_SIZE)];
  63#if defined(MXC_NFC_V1)
  64        u16 buf_size;
  65        u16 reserved2;
  66        u16 buf_addr;
  67        u16 flash_addr;
  68        u16 flash_cmd;
  69        u16 config;
  70        u16 ecc_status_result;
  71        u16 rsltmain_area;
  72        u16 rsltspare_area;
  73        u16 wrprot;
  74        u16 unlockstart_blkaddr;
  75        u16 unlockend_blkaddr;
  76        u16 nf_wrprst;
  77        u16 config1;
  78        u16 config2;
  79#elif defined(MXC_NFC_V2_1)
  80        u16 reserved2[2];
  81        u16 buf_addr;
  82        u16 flash_addr;
  83        u16 flash_cmd;
  84        u16 config;
  85        u32 ecc_status_result;
  86        u16 spare_area_size;
  87        u16 wrprot;
  88        u16 reserved3[2];
  89        u16 nf_wrprst;
  90        u16 config1;
  91        u16 config2;
  92        u16 reserved4;
  93        u16 unlockstart_blkaddr;
  94        u16 unlockend_blkaddr;
  95        u16 unlockstart_blkaddr1;
  96        u16 unlockend_blkaddr1;
  97        u16 unlockstart_blkaddr2;
  98        u16 unlockend_blkaddr2;
  99        u16 unlockstart_blkaddr3;
 100        u16 unlockend_blkaddr3;
 101#elif defined(MXC_NFC_V3_2)
 102        u32 flash_cmd;
 103        u32 flash_addr[12];
 104        u32 config1;
 105        u32 ecc_status_result;
 106        u32 status_sum;
 107        u32 launch;
 108#endif
 109};
 110
 111#ifdef MXC_NFC_V3_2
 112struct mxc_nand_ip_regs {
 113        u32 wrprot;
 114        u32 wrprot_unlock_blkaddr[8];
 115        u32 config2;
 116        u32 config3;
 117        u32 ipc;
 118        u32 err_addr;
 119        u32 delay_line;
 120};
 121#endif
 122
 123/* Set FCMD to 1, rest to 0 for Command operation */
 124#define NFC_CMD                         0x1
 125
 126/* Set FADD to 1, rest to 0 for Address operation */
 127#define NFC_ADDR                        0x2
 128
 129/* Set FDI to 1, rest to 0 for Input operation */
 130#define NFC_INPUT                       0x4
 131
 132/* Set FDO to 001, rest to 0 for Data Output operation */
 133#define NFC_OUTPUT                      0x8
 134
 135/* Set FDO to 010, rest to 0 for Read ID operation */
 136#define NFC_ID                          0x10
 137
 138/* Set FDO to 100, rest to 0 for Read Status operation */
 139#define NFC_STATUS                      0x20
 140
 141#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
 142#define NFC_CONFIG1_SP_EN               (1 << 2)
 143#define NFC_CONFIG1_RST                 (1 << 6)
 144#define NFC_CONFIG1_CE                  (1 << 7)
 145#elif defined(MXC_NFC_V3_2)
 146#define NFC_CONFIG1_SP_EN               (1 << 0)
 147#define NFC_CONFIG1_CE                  (1 << 1)
 148#define NFC_CONFIG1_RST                 (1 << 2)
 149#endif
 150#define NFC_V1_V2_CONFIG1_ECC_EN        (1 << 3)
 151#define NFC_V1_V2_CONFIG1_INT_MSK       (1 << 4)
 152#define NFC_V1_V2_CONFIG1_BIG           (1 << 5)
 153#define NFC_V2_CONFIG1_ECC_MODE_4       (1 << 0)
 154#define NFC_V2_CONFIG1_ONE_CYCLE        (1 << 8)
 155#define NFC_V2_CONFIG1_FP_INT           (1 << 11)
 156#define NFC_V3_CONFIG1_RBA_MASK         (0x7 << 4)
 157#define NFC_V3_CONFIG1_RBA(x)           (((x) & 0x7) << 4)
 158
 159#define NFC_V1_V2_CONFIG2_INT           (1 << 15)
 160#define NFC_V3_CONFIG2_PS_MASK          (0x3 << 0)
 161#define NFC_V3_CONFIG2_PS_512           (0 << 0)
 162#define NFC_V3_CONFIG2_PS_2048          (1 << 0)
 163#define NFC_V3_CONFIG2_PS_4096          (2 << 0)
 164#define NFC_V3_CONFIG2_ONE_CYCLE        (1 << 2)
 165#define NFC_V3_CONFIG2_ECC_EN           (1 << 3)
 166#define NFC_V3_CONFIG2_2CMD_PHASES      (1 << 4)
 167#define NFC_V3_CONFIG2_NUM_ADDR_PH0     (1 << 5)
 168#define NFC_V3_CONFIG2_ECC_MODE_8       (1 << 6)
 169#define NFC_V3_CONFIG2_PPB_MASK         (0x3 << 7)
 170#define NFC_V3_CONFIG2_PPB(x)           (((x) & 0x3) << 7)
 171#define NFC_V3_CONFIG2_EDC_MASK         (0x7 << 9)
 172#define NFC_V3_CONFIG2_EDC(x)           (((x) & 0x7) << 9)
 173#define NFC_V3_CONFIG2_NUM_ADDR_PH1(x)  (((x) & 0x3) << 12)
 174#define NFC_V3_CONFIG2_INT_MSK          (1 << 15)
 175#define NFC_V3_CONFIG2_SPAS_MASK        (0xff << 16)
 176#define NFC_V3_CONFIG2_SPAS(x)          (((x) & 0xff) << 16)
 177#define NFC_V3_CONFIG2_ST_CMD_MASK      (0xff << 24)
 178#define NFC_V3_CONFIG2_ST_CMD(x)        (((x) & 0xff) << 24)
 179
 180#define NFC_V3_CONFIG3_ADD_OP(x)        (((x) & 0x3) << 0)
 181#define NFC_V3_CONFIG3_FW8              (1 << 3)
 182#define NFC_V3_CONFIG3_SBB(x)           (((x) & 0x7) << 8)
 183#define NFC_V3_CONFIG3_NUM_OF_DEVS(x)   (((x) & 0x7) << 12)
 184#define NFC_V3_CONFIG3_RBB_MODE         (1 << 15)
 185#define NFC_V3_CONFIG3_NO_SDMA          (1 << 20)
 186
 187#define NFC_V3_WRPROT_UNLOCK            (1 << 2)
 188#define NFC_V3_WRPROT_BLS_UNLOCK        (2 << 6)
 189
 190#define NFC_V3_IPC_CREQ                 (1 << 0)
 191#define NFC_V3_IPC_INT                  (1 << 31)
 192
 193#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
 194#define operation       config2
 195#define readnfc         readw
 196#define writenfc        writew
 197#elif defined(MXC_NFC_V3_2)
 198#define operation       launch
 199#define readnfc         readl
 200#define writenfc        writel
 201#endif
 202
 203#endif /* __MXC_NAND_H */
 204