uboot/drivers/mtd/nand/raw/nand_bbt.c
<<
>>
Prefs
   1/*
   2 *  Overview:
   3 *   Bad block table support for the NAND driver
   4 *
   5 *  Copyright © 2004 Thomas Gleixner (tglx@linutronix.de)
   6 *
   7 * This program is free software; you can redistribute it and/or modify
   8 * it under the terms of the GNU General Public License version 2 as
   9 * published by the Free Software Foundation.
  10 *
  11 * Description:
  12 *
  13 * When nand_scan_bbt is called, then it tries to find the bad block table
  14 * depending on the options in the BBT descriptor(s). If no flash based BBT
  15 * (NAND_BBT_USE_FLASH) is specified then the device is scanned for factory
  16 * marked good / bad blocks. This information is used to create a memory BBT.
  17 * Once a new bad block is discovered then the "factory" information is updated
  18 * on the device.
  19 * If a flash based BBT is specified then the function first tries to find the
  20 * BBT on flash. If a BBT is found then the contents are read and the memory
  21 * based BBT is created. If a mirrored BBT is selected then the mirror is
  22 * searched too and the versions are compared. If the mirror has a greater
  23 * version number, then the mirror BBT is used to build the memory based BBT.
  24 * If the tables are not versioned, then we "or" the bad block information.
  25 * If one of the BBTs is out of date or does not exist it is (re)created.
  26 * If no BBT exists at all then the device is scanned for factory marked
  27 * good / bad blocks and the bad block tables are created.
  28 *
  29 * For manufacturer created BBTs like the one found on M-SYS DOC devices
  30 * the BBT is searched and read but never created
  31 *
  32 * The auto generated bad block table is located in the last good blocks
  33 * of the device. The table is mirrored, so it can be updated eventually.
  34 * The table is marked in the OOB area with an ident pattern and a version
  35 * number which indicates which of both tables is more up to date. If the NAND
  36 * controller needs the complete OOB area for the ECC information then the
  37 * option NAND_BBT_NO_OOB should be used (along with NAND_BBT_USE_FLASH, of
  38 * course): it moves the ident pattern and the version byte into the data area
  39 * and the OOB area will remain untouched.
  40 *
  41 * The table uses 2 bits per block
  42 * 11b:         block is good
  43 * 00b:         block is factory marked bad
  44 * 01b, 10b:    block is marked bad due to wear
  45 *
  46 * The memory bad block table uses the following scheme:
  47 * 00b:         block is good
  48 * 01b:         block is marked bad due to wear
  49 * 10b:         block is reserved (to protect the bbt area)
  50 * 11b:         block is factory marked bad
  51 *
  52 * Multichip devices like DOC store the bad block info per floor.
  53 *
  54 * Following assumptions are made:
  55 * - bbts start at a page boundary, if autolocated on a block boundary
  56 * - the space necessary for a bbt in FLASH does not exceed a block boundary
  57 *
  58 */
  59
  60#include <common.h>
  61#include <log.h>
  62#include <malloc.h>
  63#include <dm/devres.h>
  64#include <linux/bug.h>
  65#include <linux/compat.h>
  66#include <linux/mtd/mtd.h>
  67#include <linux/mtd/bbm.h>
  68#include <linux/mtd/rawnand.h>
  69#include <linux/bitops.h>
  70#include <linux/string.h>
  71
  72#define BBT_BLOCK_GOOD          0x00
  73#define BBT_BLOCK_WORN          0x01
  74#define BBT_BLOCK_RESERVED      0x02
  75#define BBT_BLOCK_FACTORY_BAD   0x03
  76
  77#define BBT_ENTRY_MASK          0x03
  78#define BBT_ENTRY_SHIFT         2
  79
  80static int nand_update_bbt(struct mtd_info *mtd, loff_t offs);
  81
  82static inline uint8_t bbt_get_entry(struct nand_chip *chip, int block)
  83{
  84        uint8_t entry = chip->bbt[block >> BBT_ENTRY_SHIFT];
  85        entry >>= (block & BBT_ENTRY_MASK) * 2;
  86        return entry & BBT_ENTRY_MASK;
  87}
  88
  89static inline void bbt_mark_entry(struct nand_chip *chip, int block,
  90                uint8_t mark)
  91{
  92        uint8_t msk = (mark & BBT_ENTRY_MASK) << ((block & BBT_ENTRY_MASK) * 2);
  93        chip->bbt[block >> BBT_ENTRY_SHIFT] |= msk;
  94}
  95
  96static int check_pattern_no_oob(uint8_t *buf, struct nand_bbt_descr *td)
  97{
  98        if (memcmp(buf, td->pattern, td->len))
  99                return -1;
 100        return 0;
 101}
 102
 103/**
 104 * check_pattern - [GENERIC] check if a pattern is in the buffer
 105 * @buf: the buffer to search
 106 * @len: the length of buffer to search
 107 * @paglen: the pagelength
 108 * @td: search pattern descriptor
 109 *
 110 * Check for a pattern at the given place. Used to search bad block tables and
 111 * good / bad block identifiers.
 112 */
 113static int check_pattern(uint8_t *buf, int len, int paglen, struct nand_bbt_descr *td)
 114{
 115        if (td->options & NAND_BBT_NO_OOB)
 116                return check_pattern_no_oob(buf, td);
 117
 118        /* Compare the pattern */
 119        if (memcmp(buf + paglen + td->offs, td->pattern, td->len))
 120                return -1;
 121
 122        return 0;
 123}
 124
 125/**
 126 * check_short_pattern - [GENERIC] check if a pattern is in the buffer
 127 * @buf: the buffer to search
 128 * @td: search pattern descriptor
 129 *
 130 * Check for a pattern at the given place. Used to search bad block tables and
 131 * good / bad block identifiers. Same as check_pattern, but no optional empty
 132 * check.
 133 */
 134static int check_short_pattern(uint8_t *buf, struct nand_bbt_descr *td)
 135{
 136        /* Compare the pattern */
 137        if (memcmp(buf + td->offs, td->pattern, td->len))
 138                return -1;
 139        return 0;
 140}
 141
 142/**
 143 * add_marker_len - compute the length of the marker in data area
 144 * @td: BBT descriptor used for computation
 145 *
 146 * The length will be 0 if the marker is located in OOB area.
 147 */
 148static u32 add_marker_len(struct nand_bbt_descr *td)
 149{
 150        u32 len;
 151
 152        if (!(td->options & NAND_BBT_NO_OOB))
 153                return 0;
 154
 155        len = td->len;
 156        if (td->options & NAND_BBT_VERSION)
 157                len++;
 158        return len;
 159}
 160
 161/**
 162 * read_bbt - [GENERIC] Read the bad block table starting from page
 163 * @mtd: MTD device structure
 164 * @buf: temporary buffer
 165 * @page: the starting page
 166 * @num: the number of bbt descriptors to read
 167 * @td: the bbt describtion table
 168 * @offs: block number offset in the table
 169 *
 170 * Read the bad block table starting from page.
 171 */
 172static int read_bbt(struct mtd_info *mtd, uint8_t *buf, int page, int num,
 173                struct nand_bbt_descr *td, int offs)
 174{
 175        int res, ret = 0, i, j, act = 0;
 176        struct nand_chip *this = mtd_to_nand(mtd);
 177        size_t retlen, len, totlen;
 178        loff_t from;
 179        int bits = td->options & NAND_BBT_NRBITS_MSK;
 180        uint8_t msk = (uint8_t)((1 << bits) - 1);
 181        u32 marker_len;
 182        int reserved_block_code = td->reserved_block_code;
 183
 184        totlen = (num * bits) >> 3;
 185        marker_len = add_marker_len(td);
 186        from = ((loff_t)page) << this->page_shift;
 187
 188        while (totlen) {
 189                len = min(totlen, (size_t)(1 << this->bbt_erase_shift));
 190                if (marker_len) {
 191                        /*
 192                         * In case the BBT marker is not in the OOB area it
 193                         * will be just in the first page.
 194                         */
 195                        len -= marker_len;
 196                        from += marker_len;
 197                        marker_len = 0;
 198                }
 199                res = mtd_read(mtd, from, len, &retlen, buf);
 200                if (res < 0) {
 201                        if (mtd_is_eccerr(res)) {
 202                                pr_info("nand_bbt: ECC error in BBT at 0x%012llx\n",
 203                                        from & ~mtd->writesize);
 204                                return res;
 205                        } else if (mtd_is_bitflip(res)) {
 206                                pr_info("nand_bbt: corrected error in BBT at 0x%012llx\n",
 207                                        from & ~mtd->writesize);
 208                                ret = res;
 209                        } else {
 210                                pr_info("nand_bbt: error reading BBT\n");
 211                                return res;
 212                        }
 213                }
 214
 215                /* Analyse data */
 216                for (i = 0; i < len; i++) {
 217                        uint8_t dat = buf[i];
 218                        for (j = 0; j < 8; j += bits, act++) {
 219                                uint8_t tmp = (dat >> j) & msk;
 220                                if (tmp == msk)
 221                                        continue;
 222                                if (reserved_block_code && (tmp == reserved_block_code)) {
 223                                        pr_info("nand_read_bbt: reserved block at 0x%012llx\n",
 224                                                 (loff_t)(offs + act) <<
 225                                                 this->bbt_erase_shift);
 226                                        bbt_mark_entry(this, offs + act,
 227                                                        BBT_BLOCK_RESERVED);
 228                                        mtd->ecc_stats.bbtblocks++;
 229                                        continue;
 230                                }
 231                                /*
 232                                 * Leave it for now, if it's matured we can
 233                                 * move this message to pr_debug.
 234                                 */
 235                                pr_info("nand_read_bbt: bad block at 0x%012llx\n",
 236                                         (loff_t)(offs + act) <<
 237                                         this->bbt_erase_shift);
 238                                /* Factory marked bad or worn out? */
 239                                if (tmp == 0)
 240                                        bbt_mark_entry(this, offs + act,
 241                                                        BBT_BLOCK_FACTORY_BAD);
 242                                else
 243                                        bbt_mark_entry(this, offs + act,
 244                                                        BBT_BLOCK_WORN);
 245                                mtd->ecc_stats.badblocks++;
 246                        }
 247                }
 248                totlen -= len;
 249                from += len;
 250        }
 251        return ret;
 252}
 253
 254/**
 255 * read_abs_bbt - [GENERIC] Read the bad block table starting at a given page
 256 * @mtd: MTD device structure
 257 * @buf: temporary buffer
 258 * @td: descriptor for the bad block table
 259 * @chip: read the table for a specific chip, -1 read all chips; applies only if
 260 *        NAND_BBT_PERCHIP option is set
 261 *
 262 * Read the bad block table for all chips starting at a given page. We assume
 263 * that the bbt bits are in consecutive order.
 264 */
 265static int read_abs_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td, int chip)
 266{
 267        struct nand_chip *this = mtd_to_nand(mtd);
 268        int res = 0, i;
 269
 270        if (td->options & NAND_BBT_PERCHIP) {
 271                int offs = 0;
 272                for (i = 0; i < this->numchips; i++) {
 273                        if (chip == -1 || chip == i)
 274                                res = read_bbt(mtd, buf, td->pages[i],
 275                                        this->chipsize >> this->bbt_erase_shift,
 276                                        td, offs);
 277                        if (res)
 278                                return res;
 279                        offs += this->chipsize >> this->bbt_erase_shift;
 280                }
 281        } else {
 282                res = read_bbt(mtd, buf, td->pages[0],
 283                                mtd->size >> this->bbt_erase_shift, td, 0);
 284                if (res)
 285                        return res;
 286        }
 287        return 0;
 288}
 289
 290/* BBT marker is in the first page, no OOB */
 291static int scan_read_data(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
 292                         struct nand_bbt_descr *td)
 293{
 294        size_t retlen;
 295        size_t len;
 296
 297        len = td->len;
 298        if (td->options & NAND_BBT_VERSION)
 299                len++;
 300
 301        return mtd_read(mtd, offs, len, &retlen, buf);
 302}
 303
 304/**
 305 * scan_read_oob - [GENERIC] Scan data+OOB region to buffer
 306 * @mtd: MTD device structure
 307 * @buf: temporary buffer
 308 * @offs: offset at which to scan
 309 * @len: length of data region to read
 310 *
 311 * Scan read data from data+OOB. May traverse multiple pages, interleaving
 312 * page,OOB,page,OOB,... in buf. Completes transfer and returns the "strongest"
 313 * ECC condition (error or bitflip). May quit on the first (non-ECC) error.
 314 */
 315static int scan_read_oob(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
 316                         size_t len)
 317{
 318        struct mtd_oob_ops ops;
 319        int res, ret = 0;
 320
 321        ops.mode = MTD_OPS_PLACE_OOB;
 322        ops.ooboffs = 0;
 323        ops.ooblen = mtd->oobsize;
 324
 325        while (len > 0) {
 326                ops.datbuf = buf;
 327                ops.len = min(len, (size_t)mtd->writesize);
 328                ops.oobbuf = buf + ops.len;
 329
 330                res = mtd_read_oob(mtd, offs, &ops);
 331                if (res) {
 332                        if (!mtd_is_bitflip_or_eccerr(res))
 333                                return res;
 334                        else if (mtd_is_eccerr(res) || !ret)
 335                                ret = res;
 336                }
 337
 338                buf += mtd->oobsize + mtd->writesize;
 339                len -= mtd->writesize;
 340                offs += mtd->writesize;
 341        }
 342        return ret;
 343}
 344
 345static int scan_read(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
 346                         size_t len, struct nand_bbt_descr *td)
 347{
 348        if (td->options & NAND_BBT_NO_OOB)
 349                return scan_read_data(mtd, buf, offs, td);
 350        else
 351                return scan_read_oob(mtd, buf, offs, len);
 352}
 353
 354/* Scan write data with oob to flash */
 355static int scan_write_bbt(struct mtd_info *mtd, loff_t offs, size_t len,
 356                          uint8_t *buf, uint8_t *oob)
 357{
 358        struct mtd_oob_ops ops;
 359
 360        ops.mode = MTD_OPS_PLACE_OOB;
 361        ops.ooboffs = 0;
 362        ops.ooblen = mtd->oobsize;
 363        ops.datbuf = buf;
 364        ops.oobbuf = oob;
 365        ops.len = len;
 366
 367        return mtd_write_oob(mtd, offs, &ops);
 368}
 369
 370static u32 bbt_get_ver_offs(struct mtd_info *mtd, struct nand_bbt_descr *td)
 371{
 372        u32 ver_offs = td->veroffs;
 373
 374        if (!(td->options & NAND_BBT_NO_OOB))
 375                ver_offs += mtd->writesize;
 376        return ver_offs;
 377}
 378
 379/**
 380 * read_abs_bbts - [GENERIC] Read the bad block table(s) for all chips starting at a given page
 381 * @mtd: MTD device structure
 382 * @buf: temporary buffer
 383 * @td: descriptor for the bad block table
 384 * @md: descriptor for the bad block table mirror
 385 *
 386 * Read the bad block table(s) for all chips starting at a given page. We
 387 * assume that the bbt bits are in consecutive order.
 388 */
 389static void read_abs_bbts(struct mtd_info *mtd, uint8_t *buf,
 390                          struct nand_bbt_descr *td, struct nand_bbt_descr *md)
 391{
 392        struct nand_chip *this = mtd_to_nand(mtd);
 393
 394        /* Read the primary version, if available */
 395        if (td->options & NAND_BBT_VERSION) {
 396                scan_read(mtd, buf, (loff_t)td->pages[0] << this->page_shift,
 397                              mtd->writesize, td);
 398                td->version[0] = buf[bbt_get_ver_offs(mtd, td)];
 399                pr_info("Bad block table at page %d, version 0x%02X\n",
 400                         td->pages[0], td->version[0]);
 401        }
 402
 403        /* Read the mirror version, if available */
 404        if (md && (md->options & NAND_BBT_VERSION)) {
 405                scan_read(mtd, buf, (loff_t)md->pages[0] << this->page_shift,
 406                              mtd->writesize, md);
 407                md->version[0] = buf[bbt_get_ver_offs(mtd, md)];
 408                pr_info("Bad block table at page %d, version 0x%02X\n",
 409                         md->pages[0], md->version[0]);
 410        }
 411}
 412
 413/* Scan a given block partially */
 414static int scan_block_fast(struct mtd_info *mtd, struct nand_bbt_descr *bd,
 415                           loff_t offs, uint8_t *buf, int numpages)
 416{
 417        struct mtd_oob_ops ops;
 418        int j, ret;
 419
 420        ops.ooblen = mtd->oobsize;
 421        ops.oobbuf = buf;
 422        ops.ooboffs = 0;
 423        ops.datbuf = NULL;
 424        ops.mode = MTD_OPS_PLACE_OOB;
 425
 426        for (j = 0; j < numpages; j++) {
 427                /*
 428                 * Read the full oob until read_oob is fixed to handle single
 429                 * byte reads for 16 bit buswidth.
 430                 */
 431                ret = mtd_read_oob(mtd, offs, &ops);
 432                /* Ignore ECC errors when checking for BBM */
 433                if (ret && !mtd_is_bitflip_or_eccerr(ret))
 434                        return ret;
 435
 436                if (check_short_pattern(buf, bd))
 437                        return 1;
 438
 439                offs += mtd->writesize;
 440        }
 441        return 0;
 442}
 443
 444/**
 445 * create_bbt - [GENERIC] Create a bad block table by scanning the device
 446 * @mtd: MTD device structure
 447 * @buf: temporary buffer
 448 * @bd: descriptor for the good/bad block search pattern
 449 * @chip: create the table for a specific chip, -1 read all chips; applies only
 450 *        if NAND_BBT_PERCHIP option is set
 451 *
 452 * Create a bad block table by scanning the device for the given good/bad block
 453 * identify pattern.
 454 */
 455static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
 456        struct nand_bbt_descr *bd, int chip)
 457{
 458        struct nand_chip *this = mtd_to_nand(mtd);
 459        int i, numblocks, numpages;
 460        int startblock;
 461        loff_t from;
 462
 463        pr_info("Scanning device for bad blocks\n");
 464
 465        if (bd->options & NAND_BBT_SCAN2NDPAGE)
 466                numpages = 2;
 467        else
 468                numpages = 1;
 469
 470        if (chip == -1) {
 471                numblocks = mtd->size >> this->bbt_erase_shift;
 472                startblock = 0;
 473                from = 0;
 474        } else {
 475                if (chip >= this->numchips) {
 476                        pr_warn("create_bbt(): chipnr (%d) > available chips (%d)\n",
 477                               chip + 1, this->numchips);
 478                        return -EINVAL;
 479                }
 480                numblocks = this->chipsize >> this->bbt_erase_shift;
 481                startblock = chip * numblocks;
 482                numblocks += startblock;
 483                from = (loff_t)startblock << this->bbt_erase_shift;
 484        }
 485
 486        if (this->bbt_options & NAND_BBT_SCANLASTPAGE)
 487                from += mtd->erasesize - (mtd->writesize * numpages);
 488
 489        for (i = startblock; i < numblocks; i++) {
 490                int ret;
 491
 492                BUG_ON(bd->options & NAND_BBT_NO_OOB);
 493
 494                ret = scan_block_fast(mtd, bd, from, buf, numpages);
 495                if (ret < 0)
 496                        return ret;
 497
 498                if (ret) {
 499                        bbt_mark_entry(this, i, BBT_BLOCK_FACTORY_BAD);
 500                        pr_warn("Bad eraseblock %d at 0x%012llx\n",
 501                                i, (unsigned long long)from);
 502                        mtd->ecc_stats.badblocks++;
 503                }
 504
 505                from += (1 << this->bbt_erase_shift);
 506        }
 507        return 0;
 508}
 509
 510/**
 511 * search_bbt - [GENERIC] scan the device for a specific bad block table
 512 * @mtd: MTD device structure
 513 * @buf: temporary buffer
 514 * @td: descriptor for the bad block table
 515 *
 516 * Read the bad block table by searching for a given ident pattern. Search is
 517 * preformed either from the beginning up or from the end of the device
 518 * downwards. The search starts always at the start of a block. If the option
 519 * NAND_BBT_PERCHIP is given, each chip is searched for a bbt, which contains
 520 * the bad block information of this chip. This is necessary to provide support
 521 * for certain DOC devices.
 522 *
 523 * The bbt ident pattern resides in the oob area of the first page in a block.
 524 */
 525static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td)
 526{
 527        struct nand_chip *this = mtd_to_nand(mtd);
 528        int i, chips;
 529        int startblock, block, dir;
 530        int scanlen = mtd->writesize + mtd->oobsize;
 531        int bbtblocks;
 532        int blocktopage = this->bbt_erase_shift - this->page_shift;
 533
 534        /* Search direction top -> down? */
 535        if (td->options & NAND_BBT_LASTBLOCK) {
 536                startblock = (mtd->size >> this->bbt_erase_shift) - 1;
 537                dir = -1;
 538        } else {
 539                startblock = 0;
 540                dir = 1;
 541        }
 542
 543        /* Do we have a bbt per chip? */
 544        if (td->options & NAND_BBT_PERCHIP) {
 545                chips = this->numchips;
 546                bbtblocks = this->chipsize >> this->bbt_erase_shift;
 547                startblock &= bbtblocks - 1;
 548        } else {
 549                chips = 1;
 550                bbtblocks = mtd->size >> this->bbt_erase_shift;
 551        }
 552
 553        for (i = 0; i < chips; i++) {
 554                /* Reset version information */
 555                td->version[i] = 0;
 556                td->pages[i] = -1;
 557                /* Scan the maximum number of blocks */
 558                for (block = 0; block < td->maxblocks; block++) {
 559
 560                        int actblock = startblock + dir * block;
 561                        loff_t offs = (loff_t)actblock << this->bbt_erase_shift;
 562
 563                        /* Read first page */
 564                        scan_read(mtd, buf, offs, mtd->writesize, td);
 565                        if (!check_pattern(buf, scanlen, mtd->writesize, td)) {
 566                                td->pages[i] = actblock << blocktopage;
 567                                if (td->options & NAND_BBT_VERSION) {
 568                                        offs = bbt_get_ver_offs(mtd, td);
 569                                        td->version[i] = buf[offs];
 570                                }
 571                                break;
 572                        }
 573                }
 574                startblock += this->chipsize >> this->bbt_erase_shift;
 575        }
 576        /* Check, if we found a bbt for each requested chip */
 577        for (i = 0; i < chips; i++) {
 578                if (td->pages[i] == -1)
 579                        pr_warn("Bad block table not found for chip %d\n", i);
 580                else
 581                        pr_info("Bad block table found at page %d, version 0x%02X\n",
 582                                td->pages[i], td->version[i]);
 583        }
 584        return 0;
 585}
 586
 587/**
 588 * search_read_bbts - [GENERIC] scan the device for bad block table(s)
 589 * @mtd: MTD device structure
 590 * @buf: temporary buffer
 591 * @td: descriptor for the bad block table
 592 * @md: descriptor for the bad block table mirror
 593 *
 594 * Search and read the bad block table(s).
 595 */
 596static void search_read_bbts(struct mtd_info *mtd, uint8_t *buf,
 597                             struct nand_bbt_descr *td,
 598                             struct nand_bbt_descr *md)
 599{
 600        /* Search the primary table */
 601        search_bbt(mtd, buf, td);
 602
 603        /* Search the mirror table */
 604        if (md)
 605                search_bbt(mtd, buf, md);
 606}
 607
 608/**
 609 * write_bbt - [GENERIC] (Re)write the bad block table
 610 * @mtd: MTD device structure
 611 * @buf: temporary buffer
 612 * @td: descriptor for the bad block table
 613 * @md: descriptor for the bad block table mirror
 614 * @chipsel: selector for a specific chip, -1 for all
 615 *
 616 * (Re)write the bad block table.
 617 */
 618static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
 619                     struct nand_bbt_descr *td, struct nand_bbt_descr *md,
 620                     int chipsel)
 621{
 622        struct nand_chip *this = mtd_to_nand(mtd);
 623        struct erase_info einfo;
 624        int i, res, chip = 0;
 625        int bits, startblock, dir, page, offs, numblocks, sft, sftmsk;
 626        int nrchips, pageoffs, ooboffs;
 627        uint8_t msk[4];
 628        uint8_t rcode = td->reserved_block_code;
 629        size_t retlen, len = 0;
 630        loff_t to;
 631        struct mtd_oob_ops ops;
 632
 633        ops.ooblen = mtd->oobsize;
 634        ops.ooboffs = 0;
 635        ops.datbuf = NULL;
 636        ops.mode = MTD_OPS_PLACE_OOB;
 637
 638        if (!rcode)
 639                rcode = 0xff;
 640        /* Write bad block table per chip rather than per device? */
 641        if (td->options & NAND_BBT_PERCHIP) {
 642                numblocks = (int)(this->chipsize >> this->bbt_erase_shift);
 643                /* Full device write or specific chip? */
 644                if (chipsel == -1) {
 645                        nrchips = this->numchips;
 646                } else {
 647                        nrchips = chipsel + 1;
 648                        chip = chipsel;
 649                }
 650        } else {
 651                numblocks = (int)(mtd->size >> this->bbt_erase_shift);
 652                nrchips = 1;
 653        }
 654
 655        /* Loop through the chips */
 656        for (; chip < nrchips; chip++) {
 657                /*
 658                 * There was already a version of the table, reuse the page
 659                 * This applies for absolute placement too, as we have the
 660                 * page nr. in td->pages.
 661                 */
 662                if (td->pages[chip] != -1) {
 663                        page = td->pages[chip];
 664                        goto write;
 665                }
 666
 667                /*
 668                 * Automatic placement of the bad block table. Search direction
 669                 * top -> down?
 670                 */
 671                if (td->options & NAND_BBT_LASTBLOCK) {
 672                        startblock = numblocks * (chip + 1) - 1;
 673                        dir = -1;
 674                } else {
 675                        startblock = chip * numblocks;
 676                        dir = 1;
 677                }
 678
 679                for (i = 0; i < td->maxblocks; i++) {
 680                        int block = startblock + dir * i;
 681                        /* Check, if the block is bad */
 682                        switch (bbt_get_entry(this, block)) {
 683                        case BBT_BLOCK_WORN:
 684                        case BBT_BLOCK_FACTORY_BAD:
 685                                continue;
 686                        }
 687                        page = block <<
 688                                (this->bbt_erase_shift - this->page_shift);
 689                        /* Check, if the block is used by the mirror table */
 690                        if (!md || md->pages[chip] != page)
 691                                goto write;
 692                }
 693                pr_err("No space left to write bad block table\n");
 694                return -ENOSPC;
 695        write:
 696
 697                /* Set up shift count and masks for the flash table */
 698                bits = td->options & NAND_BBT_NRBITS_MSK;
 699                msk[2] = ~rcode;
 700                switch (bits) {
 701                case 1: sft = 3; sftmsk = 0x07; msk[0] = 0x00; msk[1] = 0x01;
 702                        msk[3] = 0x01;
 703                        break;
 704                case 2: sft = 2; sftmsk = 0x06; msk[0] = 0x00; msk[1] = 0x01;
 705                        msk[3] = 0x03;
 706                        break;
 707                case 4: sft = 1; sftmsk = 0x04; msk[0] = 0x00; msk[1] = 0x0C;
 708                        msk[3] = 0x0f;
 709                        break;
 710                case 8: sft = 0; sftmsk = 0x00; msk[0] = 0x00; msk[1] = 0x0F;
 711                        msk[3] = 0xff;
 712                        break;
 713                default: return -EINVAL;
 714                }
 715
 716                to = ((loff_t)page) << this->page_shift;
 717
 718                /* Must we save the block contents? */
 719                if (td->options & NAND_BBT_SAVECONTENT) {
 720                        /* Make it block aligned */
 721                        to &= ~(((loff_t)1 << this->bbt_erase_shift) - 1);
 722                        len = 1 << this->bbt_erase_shift;
 723                        res = mtd_read(mtd, to, len, &retlen, buf);
 724                        if (res < 0) {
 725                                if (retlen != len) {
 726                                        pr_info("nand_bbt: error reading block for writing the bad block table\n");
 727                                        return res;
 728                                }
 729                                pr_warn("nand_bbt: ECC error while reading block for writing bad block table\n");
 730                        }
 731                        /* Read oob data */
 732                        ops.ooblen = (len >> this->page_shift) * mtd->oobsize;
 733                        ops.oobbuf = &buf[len];
 734                        res = mtd_read_oob(mtd, to + mtd->writesize, &ops);
 735                        if (res < 0 || ops.oobretlen != ops.ooblen)
 736                                goto outerr;
 737
 738                        /* Calc the byte offset in the buffer */
 739                        pageoffs = page - (int)(to >> this->page_shift);
 740                        offs = pageoffs << this->page_shift;
 741                        /* Preset the bbt area with 0xff */
 742                        memset(&buf[offs], 0xff, (size_t)(numblocks >> sft));
 743                        ooboffs = len + (pageoffs * mtd->oobsize);
 744
 745                } else if (td->options & NAND_BBT_NO_OOB) {
 746                        ooboffs = 0;
 747                        offs = td->len;
 748                        /* The version byte */
 749                        if (td->options & NAND_BBT_VERSION)
 750                                offs++;
 751                        /* Calc length */
 752                        len = (size_t)(numblocks >> sft);
 753                        len += offs;
 754                        /* Make it page aligned! */
 755                        len = ALIGN(len, mtd->writesize);
 756                        /* Preset the buffer with 0xff */
 757                        memset(buf, 0xff, len);
 758                        /* Pattern is located at the begin of first page */
 759                        memcpy(buf, td->pattern, td->len);
 760                } else {
 761                        /* Calc length */
 762                        len = (size_t)(numblocks >> sft);
 763                        /* Make it page aligned! */
 764                        len = ALIGN(len, mtd->writesize);
 765                        /* Preset the buffer with 0xff */
 766                        memset(buf, 0xff, len +
 767                               (len >> this->page_shift)* mtd->oobsize);
 768                        offs = 0;
 769                        ooboffs = len;
 770                        /* Pattern is located in oob area of first page */
 771                        memcpy(&buf[ooboffs + td->offs], td->pattern, td->len);
 772                }
 773
 774                if (td->options & NAND_BBT_VERSION)
 775                        buf[ooboffs + td->veroffs] = td->version[chip];
 776
 777                /* Walk through the memory table */
 778                for (i = 0; i < numblocks; i++) {
 779                        uint8_t dat;
 780                        int sftcnt = (i << (3 - sft)) & sftmsk;
 781                        dat = bbt_get_entry(this, chip * numblocks + i);
 782                        /* Do not store the reserved bbt blocks! */
 783                        buf[offs + (i >> sft)] &= ~(msk[dat] << sftcnt);
 784                }
 785
 786                memset(&einfo, 0, sizeof(einfo));
 787                einfo.mtd = mtd;
 788                einfo.addr = to;
 789                einfo.len = 1 << this->bbt_erase_shift;
 790                res = nand_erase_nand(mtd, &einfo, 1);
 791                if (res < 0)
 792                        goto outerr;
 793
 794                res = scan_write_bbt(mtd, to, len, buf,
 795                                td->options & NAND_BBT_NO_OOB ? NULL :
 796                                &buf[len]);
 797                if (res < 0)
 798                        goto outerr;
 799
 800                pr_info("Bad block table written to 0x%012llx, version 0x%02X\n",
 801                         (unsigned long long)to, td->version[chip]);
 802
 803                /* Mark it as used */
 804                td->pages[chip] = page;
 805        }
 806        return 0;
 807
 808 outerr:
 809        pr_warn("nand_bbt: error while writing bad block table %d\n", res);
 810        return res;
 811}
 812
 813/**
 814 * nand_memory_bbt - [GENERIC] create a memory based bad block table
 815 * @mtd: MTD device structure
 816 * @bd: descriptor for the good/bad block search pattern
 817 *
 818 * The function creates a memory based bbt by scanning the device for
 819 * manufacturer / software marked good / bad blocks.
 820 */
 821static inline int nand_memory_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
 822{
 823        struct nand_chip *this = mtd_to_nand(mtd);
 824
 825        return create_bbt(mtd, this->buffers->databuf, bd, -1);
 826}
 827
 828/**
 829 * check_create - [GENERIC] create and write bbt(s) if necessary
 830 * @mtd: MTD device structure
 831 * @buf: temporary buffer
 832 * @bd: descriptor for the good/bad block search pattern
 833 *
 834 * The function checks the results of the previous call to read_bbt and creates
 835 * / updates the bbt(s) if necessary. Creation is necessary if no bbt was found
 836 * for the chip/device. Update is necessary if one of the tables is missing or
 837 * the version nr. of one table is less than the other.
 838 */
 839static int check_create(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd)
 840{
 841        int i, chips, writeops, create, chipsel, res, res2;
 842        struct nand_chip *this = mtd_to_nand(mtd);
 843        struct nand_bbt_descr *td = this->bbt_td;
 844        struct nand_bbt_descr *md = this->bbt_md;
 845        struct nand_bbt_descr *rd, *rd2;
 846
 847        /* Do we have a bbt per chip? */
 848        if (td->options & NAND_BBT_PERCHIP)
 849                chips = this->numchips;
 850        else
 851                chips = 1;
 852
 853        for (i = 0; i < chips; i++) {
 854                writeops = 0;
 855                create = 0;
 856                rd = NULL;
 857                rd2 = NULL;
 858                res = res2 = 0;
 859                /* Per chip or per device? */
 860                chipsel = (td->options & NAND_BBT_PERCHIP) ? i : -1;
 861                /* Mirrored table available? */
 862                if (md) {
 863                        if (td->pages[i] == -1 && md->pages[i] == -1) {
 864                                create = 1;
 865                                writeops = 0x03;
 866                        } else if (td->pages[i] == -1) {
 867                                rd = md;
 868                                writeops = 0x01;
 869                        } else if (md->pages[i] == -1) {
 870                                rd = td;
 871                                writeops = 0x02;
 872                        } else if (td->version[i] == md->version[i]) {
 873                                rd = td;
 874                                if (!(td->options & NAND_BBT_VERSION))
 875                                        rd2 = md;
 876                        } else if (((int8_t)(td->version[i] - md->version[i])) > 0) {
 877                                rd = td;
 878                                writeops = 0x02;
 879                        } else {
 880                                rd = md;
 881                                writeops = 0x01;
 882                        }
 883                } else {
 884                        if (td->pages[i] == -1) {
 885                                create = 1;
 886                                writeops = 0x01;
 887                        } else {
 888                                rd = td;
 889                        }
 890                }
 891
 892                if (create) {
 893                        /* Create the bad block table by scanning the device? */
 894                        if (!(td->options & NAND_BBT_CREATE))
 895                                continue;
 896
 897                        /* Create the table in memory by scanning the chip(s) */
 898                        if (!(this->bbt_options & NAND_BBT_CREATE_EMPTY))
 899                                create_bbt(mtd, buf, bd, chipsel);
 900
 901                        td->version[i] = 1;
 902                        if (md)
 903                                md->version[i] = 1;
 904                }
 905
 906                /* Read back first? */
 907                if (rd) {
 908                        res = read_abs_bbt(mtd, buf, rd, chipsel);
 909                        if (mtd_is_eccerr(res)) {
 910                                /* Mark table as invalid */
 911                                rd->pages[i] = -1;
 912                                rd->version[i] = 0;
 913                                i--;
 914                                continue;
 915                        }
 916                }
 917                /* If they weren't versioned, read both */
 918                if (rd2) {
 919                        res2 = read_abs_bbt(mtd, buf, rd2, chipsel);
 920                        if (mtd_is_eccerr(res2)) {
 921                                /* Mark table as invalid */
 922                                rd2->pages[i] = -1;
 923                                rd2->version[i] = 0;
 924                                i--;
 925                                continue;
 926                        }
 927                }
 928
 929                /* Scrub the flash table(s)? */
 930                if (mtd_is_bitflip(res) || mtd_is_bitflip(res2))
 931                        writeops = 0x03;
 932
 933                /* Update version numbers before writing */
 934                if (md) {
 935                        td->version[i] = max(td->version[i], md->version[i]);
 936                        md->version[i] = td->version[i];
 937                }
 938
 939                /* Write the bad block table to the device? */
 940                if ((writeops & 0x01) && (td->options & NAND_BBT_WRITE)) {
 941                        res = write_bbt(mtd, buf, td, md, chipsel);
 942                        if (res < 0)
 943                                return res;
 944                }
 945
 946                /* Write the mirror bad block table to the device? */
 947                if ((writeops & 0x02) && md && (md->options & NAND_BBT_WRITE)) {
 948                        res = write_bbt(mtd, buf, md, td, chipsel);
 949                        if (res < 0)
 950                                return res;
 951                }
 952        }
 953        return 0;
 954}
 955
 956/**
 957 * mark_bbt_regions - [GENERIC] mark the bad block table regions
 958 * @mtd: MTD device structure
 959 * @td: bad block table descriptor
 960 *
 961 * The bad block table regions are marked as "bad" to prevent accidental
 962 * erasures / writes. The regions are identified by the mark 0x02.
 963 */
 964static void mark_bbt_region(struct mtd_info *mtd, struct nand_bbt_descr *td)
 965{
 966        struct nand_chip *this = mtd_to_nand(mtd);
 967        int i, j, chips, block, nrblocks, update;
 968        uint8_t oldval;
 969
 970        /* Do we have a bbt per chip? */
 971        if (td->options & NAND_BBT_PERCHIP) {
 972                chips = this->numchips;
 973                nrblocks = (int)(this->chipsize >> this->bbt_erase_shift);
 974        } else {
 975                chips = 1;
 976                nrblocks = (int)(mtd->size >> this->bbt_erase_shift);
 977        }
 978
 979        for (i = 0; i < chips; i++) {
 980                if ((td->options & NAND_BBT_ABSPAGE) ||
 981                    !(td->options & NAND_BBT_WRITE)) {
 982                        if (td->pages[i] == -1)
 983                                continue;
 984                        block = td->pages[i] >> (this->bbt_erase_shift - this->page_shift);
 985                        oldval = bbt_get_entry(this, block);
 986                        bbt_mark_entry(this, block, BBT_BLOCK_RESERVED);
 987                        if ((oldval != BBT_BLOCK_RESERVED) &&
 988                                        td->reserved_block_code)
 989                                nand_update_bbt(mtd, (loff_t)block <<
 990                                                this->bbt_erase_shift);
 991                        continue;
 992                }
 993                update = 0;
 994                if (td->options & NAND_BBT_LASTBLOCK)
 995                        block = ((i + 1) * nrblocks) - td->maxblocks;
 996                else
 997                        block = i * nrblocks;
 998                for (j = 0; j < td->maxblocks; j++) {
 999                        oldval = bbt_get_entry(this, block);
1000                        bbt_mark_entry(this, block, BBT_BLOCK_RESERVED);
1001                        if (oldval != BBT_BLOCK_RESERVED)
1002                                update = 1;
1003                        block++;
1004                }
1005                /*
1006                 * If we want reserved blocks to be recorded to flash, and some
1007                 * new ones have been marked, then we need to update the stored
1008                 * bbts.  This should only happen once.
1009                 */
1010                if (update && td->reserved_block_code)
1011                        nand_update_bbt(mtd, (loff_t)(block - 1) <<
1012                                        this->bbt_erase_shift);
1013        }
1014}
1015
1016/**
1017 * verify_bbt_descr - verify the bad block description
1018 * @mtd: MTD device structure
1019 * @bd: the table to verify
1020 *
1021 * This functions performs a few sanity checks on the bad block description
1022 * table.
1023 */
1024static void verify_bbt_descr(struct mtd_info *mtd, struct nand_bbt_descr *bd)
1025{
1026        struct nand_chip *this = mtd_to_nand(mtd);
1027        u32 pattern_len;
1028        u32 bits;
1029        u32 table_size;
1030
1031        if (!bd)
1032                return;
1033
1034        pattern_len = bd->len;
1035        bits = bd->options & NAND_BBT_NRBITS_MSK;
1036
1037        BUG_ON((this->bbt_options & NAND_BBT_NO_OOB) &&
1038                        !(this->bbt_options & NAND_BBT_USE_FLASH));
1039        BUG_ON(!bits);
1040
1041        if (bd->options & NAND_BBT_VERSION)
1042                pattern_len++;
1043
1044        if (bd->options & NAND_BBT_NO_OOB) {
1045                BUG_ON(!(this->bbt_options & NAND_BBT_USE_FLASH));
1046                BUG_ON(!(this->bbt_options & NAND_BBT_NO_OOB));
1047                BUG_ON(bd->offs);
1048                if (bd->options & NAND_BBT_VERSION)
1049                        BUG_ON(bd->veroffs != bd->len);
1050                BUG_ON(bd->options & NAND_BBT_SAVECONTENT);
1051        }
1052
1053        if (bd->options & NAND_BBT_PERCHIP)
1054                table_size = this->chipsize >> this->bbt_erase_shift;
1055        else
1056                table_size = mtd->size >> this->bbt_erase_shift;
1057        table_size >>= 3;
1058        table_size *= bits;
1059        if (bd->options & NAND_BBT_NO_OOB)
1060                table_size += pattern_len;
1061        BUG_ON(table_size > (1 << this->bbt_erase_shift));
1062}
1063
1064/**
1065 * nand_scan_bbt - [NAND Interface] scan, find, read and maybe create bad block table(s)
1066 * @mtd: MTD device structure
1067 * @bd: descriptor for the good/bad block search pattern
1068 *
1069 * The function checks, if a bad block table(s) is/are already available. If
1070 * not it scans the device for manufacturer marked good / bad blocks and writes
1071 * the bad block table(s) to the selected place.
1072 *
1073 * The bad block table memory is allocated here. It must be freed by calling
1074 * the nand_free_bbt function.
1075 */
1076static int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
1077{
1078        struct nand_chip *this = mtd_to_nand(mtd);
1079        int len, res;
1080        uint8_t *buf;
1081        struct nand_bbt_descr *td = this->bbt_td;
1082        struct nand_bbt_descr *md = this->bbt_md;
1083
1084        len = (mtd->size >> (this->bbt_erase_shift + 2)) ? : 1;
1085        /*
1086         * Allocate memory (2bit per block) and clear the memory bad block
1087         * table.
1088         */
1089        this->bbt = kzalloc(len, GFP_KERNEL);
1090        if (!this->bbt)
1091                return -ENOMEM;
1092
1093        /*
1094         * If no primary table decriptor is given, scan the device to build a
1095         * memory based bad block table.
1096         */
1097        if (!td) {
1098                if ((res = nand_memory_bbt(mtd, bd))) {
1099                        pr_err("nand_bbt: can't scan flash and build the RAM-based BBT\n");
1100                        goto err;
1101                }
1102                return 0;
1103        }
1104        verify_bbt_descr(mtd, td);
1105        verify_bbt_descr(mtd, md);
1106
1107        /* Allocate a temporary buffer for one eraseblock incl. oob */
1108        len = (1 << this->bbt_erase_shift);
1109        len += (len >> this->page_shift) * mtd->oobsize;
1110        buf = vmalloc(len);
1111        if (!buf) {
1112                res = -ENOMEM;
1113                goto err;
1114        }
1115
1116        /* Is the bbt at a given page? */
1117        if (td->options & NAND_BBT_ABSPAGE) {
1118                read_abs_bbts(mtd, buf, td, md);
1119        } else {
1120                /* Search the bad block table using a pattern in oob */
1121                search_read_bbts(mtd, buf, td, md);
1122        }
1123
1124        res = check_create(mtd, buf, bd);
1125        if (res)
1126                goto err;
1127
1128        /* Prevent the bbt regions from erasing / writing */
1129        mark_bbt_region(mtd, td);
1130        if (md)
1131                mark_bbt_region(mtd, md);
1132
1133        vfree(buf);
1134        return 0;
1135
1136err:
1137        kfree(this->bbt);
1138        this->bbt = NULL;
1139        return res;
1140}
1141
1142/**
1143 * nand_update_bbt - update bad block table(s)
1144 * @mtd: MTD device structure
1145 * @offs: the offset of the newly marked block
1146 *
1147 * The function updates the bad block table(s).
1148 */
1149static int nand_update_bbt(struct mtd_info *mtd, loff_t offs)
1150{
1151        struct nand_chip *this = mtd_to_nand(mtd);
1152        int len, res = 0;
1153        int chip, chipsel;
1154        uint8_t *buf;
1155        struct nand_bbt_descr *td = this->bbt_td;
1156        struct nand_bbt_descr *md = this->bbt_md;
1157
1158        if (!this->bbt || !td)
1159                return -EINVAL;
1160
1161        /* Allocate a temporary buffer for one eraseblock incl. oob */
1162        len = (1 << this->bbt_erase_shift);
1163        len += (len >> this->page_shift) * mtd->oobsize;
1164        buf = kmalloc(len, GFP_KERNEL);
1165        if (!buf)
1166                return -ENOMEM;
1167
1168        /* Do we have a bbt per chip? */
1169        if (td->options & NAND_BBT_PERCHIP) {
1170                chip = (int)(offs >> this->chip_shift);
1171                chipsel = chip;
1172        } else {
1173                chip = 0;
1174                chipsel = -1;
1175        }
1176
1177        td->version[chip]++;
1178        if (md)
1179                md->version[chip]++;
1180
1181        /* Write the bad block table to the device? */
1182        if (td->options & NAND_BBT_WRITE) {
1183                res = write_bbt(mtd, buf, td, md, chipsel);
1184                if (res < 0)
1185                        goto out;
1186        }
1187        /* Write the mirror bad block table to the device? */
1188        if (md && (md->options & NAND_BBT_WRITE)) {
1189                res = write_bbt(mtd, buf, md, td, chipsel);
1190        }
1191
1192 out:
1193        kfree(buf);
1194        return res;
1195}
1196
1197/*
1198 * Define some generic bad / good block scan pattern which are used
1199 * while scanning a device for factory marked good / bad blocks.
1200 */
1201static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
1202
1203/* Generic flash bbt descriptors */
1204static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' };
1205static uint8_t mirror_pattern[] = {'1', 't', 'b', 'B' };
1206
1207static struct nand_bbt_descr bbt_main_descr = {
1208        .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
1209                | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
1210        .offs = 8,
1211        .len = 4,
1212        .veroffs = 12,
1213        .maxblocks = NAND_BBT_SCAN_MAXBLOCKS,
1214        .pattern = bbt_pattern
1215};
1216
1217static struct nand_bbt_descr bbt_mirror_descr = {
1218        .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
1219                | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
1220        .offs = 8,
1221        .len = 4,
1222        .veroffs = 12,
1223        .maxblocks = NAND_BBT_SCAN_MAXBLOCKS,
1224        .pattern = mirror_pattern
1225};
1226
1227static struct nand_bbt_descr bbt_main_no_oob_descr = {
1228        .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
1229                | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP
1230                | NAND_BBT_NO_OOB,
1231        .len = 4,
1232        .veroffs = 4,
1233        .maxblocks = NAND_BBT_SCAN_MAXBLOCKS,
1234        .pattern = bbt_pattern
1235};
1236
1237static struct nand_bbt_descr bbt_mirror_no_oob_descr = {
1238        .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
1239                | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP
1240                | NAND_BBT_NO_OOB,
1241        .len = 4,
1242        .veroffs = 4,
1243        .maxblocks = NAND_BBT_SCAN_MAXBLOCKS,
1244        .pattern = mirror_pattern
1245};
1246
1247#define BADBLOCK_SCAN_MASK (~NAND_BBT_NO_OOB)
1248/**
1249 * nand_create_badblock_pattern - [INTERN] Creates a BBT descriptor structure
1250 * @this: NAND chip to create descriptor for
1251 *
1252 * This function allocates and initializes a nand_bbt_descr for BBM detection
1253 * based on the properties of @this. The new descriptor is stored in
1254 * this->badblock_pattern. Thus, this->badblock_pattern should be NULL when
1255 * passed to this function.
1256 */
1257static int nand_create_badblock_pattern(struct nand_chip *this)
1258{
1259        struct nand_bbt_descr *bd;
1260        if (this->badblock_pattern) {
1261                pr_warn("Bad block pattern already allocated; not replacing\n");
1262                return -EINVAL;
1263        }
1264        bd = kzalloc(sizeof(*bd), GFP_KERNEL);
1265        if (!bd)
1266                return -ENOMEM;
1267        bd->options = this->bbt_options & BADBLOCK_SCAN_MASK;
1268        bd->offs = this->badblockpos;
1269        bd->len = (this->options & NAND_BUSWIDTH_16) ? 2 : 1;
1270        bd->pattern = scan_ff_pattern;
1271        bd->options |= NAND_BBT_DYNAMICSTRUCT;
1272        this->badblock_pattern = bd;
1273        return 0;
1274}
1275
1276/**
1277 * nand_default_bbt - [NAND Interface] Select a default bad block table for the device
1278 * @mtd: MTD device structure
1279 *
1280 * This function selects the default bad block table support for the device and
1281 * calls the nand_scan_bbt function.
1282 */
1283int nand_default_bbt(struct mtd_info *mtd)
1284{
1285        struct nand_chip *this = mtd_to_nand(mtd);
1286        int ret;
1287
1288        /* Is a flash based bad block table requested? */
1289        if (this->bbt_options & NAND_BBT_USE_FLASH) {
1290                /* Use the default pattern descriptors */
1291                if (!this->bbt_td) {
1292                        if (this->bbt_options & NAND_BBT_NO_OOB) {
1293                                this->bbt_td = &bbt_main_no_oob_descr;
1294                                this->bbt_md = &bbt_mirror_no_oob_descr;
1295                        } else {
1296                                this->bbt_td = &bbt_main_descr;
1297                                this->bbt_md = &bbt_mirror_descr;
1298                        }
1299                }
1300        } else {
1301                this->bbt_td = NULL;
1302                this->bbt_md = NULL;
1303        }
1304
1305        if (!this->badblock_pattern) {
1306                ret = nand_create_badblock_pattern(this);
1307                if (ret)
1308                        return ret;
1309        }
1310
1311        return nand_scan_bbt(mtd, this->badblock_pattern);
1312}
1313
1314/**
1315 * nand_isreserved_bbt - [NAND Interface] Check if a block is reserved
1316 * @mtd: MTD device structure
1317 * @offs: offset in the device
1318 */
1319int nand_isreserved_bbt(struct mtd_info *mtd, loff_t offs)
1320{
1321        struct nand_chip *this = mtd_to_nand(mtd);
1322        int block;
1323
1324        block = (int)(offs >> this->bbt_erase_shift);
1325        return bbt_get_entry(this, block) == BBT_BLOCK_RESERVED;
1326}
1327
1328/**
1329 * nand_isbad_bbt - [NAND Interface] Check if a block is bad
1330 * @mtd: MTD device structure
1331 * @offs: offset in the device
1332 * @allowbbt: allow access to bad block table region
1333 */
1334int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt)
1335{
1336        struct nand_chip *this = mtd_to_nand(mtd);
1337        int block, res;
1338
1339        block = (int)(offs >> this->bbt_erase_shift);
1340        res = bbt_get_entry(this, block);
1341
1342        pr_debug("nand_isbad_bbt(): bbt info for offs 0x%08x: (block %d) 0x%02x\n",
1343                 (unsigned int)offs, block, res);
1344
1345        switch (res) {
1346        case BBT_BLOCK_GOOD:
1347                return 0;
1348        case BBT_BLOCK_WORN:
1349                return 1;
1350        case BBT_BLOCK_RESERVED:
1351                return allowbbt ? 0 : 1;
1352        }
1353        return 1;
1354}
1355
1356/**
1357 * nand_markbad_bbt - [NAND Interface] Mark a block bad in the BBT
1358 * @mtd: MTD device structure
1359 * @offs: offset of the bad block
1360 */
1361int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs)
1362{
1363        struct nand_chip *this = mtd_to_nand(mtd);
1364        int block, ret = 0;
1365
1366        block = (int)(offs >> this->bbt_erase_shift);
1367
1368        /* Mark bad block in memory */
1369        bbt_mark_entry(this, block, BBT_BLOCK_WORN);
1370
1371        /* Update flash-based bad block table */
1372        if (this->bbt_options & NAND_BBT_USE_FLASH)
1373                ret = nand_update_bbt(mtd, offs);
1374
1375        return ret;
1376}
1377