// SPDX-License-Identifier: GPL-2.0+
/*
 * Cirrus Logic EP93xx ethernet MAC / MII driver.
 *
 * Copyright (C) 2010, 2009
 * Matthias Kaehlcke <matthias@kaehlcke.net>
 *
 * Copyright (C) 2004, 2005
 * Cory T. Tusar, Videon Central, Inc., <ctusar@videon-central.com>
 *
 * Based on the original eth.[ch] Cirrus Logic EP93xx Rev D. Ethernet Driver,
 * which is
 *
 * (C) Copyright 2002 2003
 * Adam Bezanson, Network Audio Technologies, Inc.
 * <bezanson@netaudiotech.com>
 */

#include <command.h>
#include <common.h>
#include <log.h>
#include <net.h>
#include <asm/arch/ep93xx.h>
#include <asm/io.h>
#include <malloc.h>
#include <miiphy.h>
#include <linux/bug.h>
#include <linux/types.h>
#include "ep93xx_eth.h"

#define GET_PRIV(eth_dev)       ((struct ep93xx_priv *)(eth_dev)->priv)
#define GET_REGS(eth_dev)       (GET_PRIV(eth_dev)->regs)

/* ep93xx_miiphy ops forward declarations */
static int ep93xx_miiphy_read(struct mii_dev *bus, int addr, int devad,
                              int reg);
static int ep93xx_miiphy_write(struct mii_dev *bus, int addr, int devad,
                               int reg, u16 value);

#if defined(EP93XX_MAC_DEBUG)
/**
 * Dump ep93xx_mac values to the terminal.
 */
static void dump_dev(struct eth_device *dev)
{
        struct ep93xx_priv *priv = GET_PRIV(dev);
        int i;

        printf("\ndump_dev()\n");
        printf("  rx_dq.base         %p\n", priv->rx_dq.base);
        printf("  rx_dq.current      %p\n", priv->rx_dq.current);
        printf("  rx_dq.end          %p\n", priv->rx_dq.end);
        printf("  rx_sq.base         %p\n", priv->rx_sq.base);
        printf("  rx_sq.current      %p\n", priv->rx_sq.current);
        printf("  rx_sq.end          %p\n", priv->rx_sq.end);

        for (i = 0; i < NUMRXDESC; i++)
                printf("  rx_buffer[%2.d]      %p\n", i, net_rx_packets[i]);

        printf("  tx_dq.base         %p\n", priv->tx_dq.base);
        printf("  tx_dq.current      %p\n", priv->tx_dq.current);
        printf("  tx_dq.end          %p\n", priv->tx_dq.end);
        printf("  tx_sq.base         %p\n", priv->tx_sq.base);
        printf("  tx_sq.current      %p\n", priv->tx_sq.current);
        printf("  tx_sq.end          %p\n", priv->tx_sq.end);
}

/**
 * Dump all RX status queue entries to the terminal.
 */
static void dump_rx_status_queue(struct eth_device *dev)
{
        struct ep93xx_priv *priv = GET_PRIV(dev);
        int i;

        printf("\ndump_rx_status_queue()\n");
        printf("  descriptor address     word1           word2\n");
        for (i = 0; i < NUMRXDESC; i++) {
                printf("  [ %p ]             %08X        %08X\n",
                        priv->rx_sq.base + i,
                        (priv->rx_sq.base + i)->word1,
                        (priv->rx_sq.base + i)->word2);
        }
}

/**
 * Dump all RX descriptor queue entries to the terminal.
 */
static void dump_rx_descriptor_queue(struct eth_device *dev)
{
        struct ep93xx_priv *priv = GET_PRIV(dev);
        int i;

        printf("\ndump_rx_descriptor_queue()\n");
        printf("  descriptor address     word1           word2\n");
        for (i = 0; i < NUMRXDESC; i++) {
                printf("  [ %p ]             %08X        %08X\n",
                        priv->rx_dq.base + i,
                        (priv->rx_dq.base + i)->word1,
                        (priv->rx_dq.base + i)->word2);
        }
}

/**
 * Dump all TX descriptor queue entries to the terminal.
 */
static void dump_tx_descriptor_queue(struct eth_device *dev)
{
        struct ep93xx_priv *priv = GET_PRIV(dev);
        int i;

        printf("\ndump_tx_descriptor_queue()\n");
        printf("  descriptor address     word1           word2\n");
        for (i = 0; i < NUMTXDESC; i++) {
                printf("  [ %p ]             %08X        %08X\n",
                        priv->tx_dq.base + i,
                        (priv->tx_dq.base + i)->word1,
                        (priv->tx_dq.base + i)->word2);
        }
}

/**
 * Dump all TX status queue entries to the terminal.
 */
static void dump_tx_status_queue(struct eth_device *dev)
{
        struct ep93xx_priv *priv = GET_PRIV(dev);
        int i;

        printf("\ndump_tx_status_queue()\n");
        printf("  descriptor address     word1\n");
        for (i = 0; i < NUMTXDESC; i++) {
                printf("  [ %p ]             %08X\n",
                        priv->rx_sq.base + i,
                        (priv->rx_sq.base + i)->word1);
        }
}
#else
#define dump_dev(x)
#define dump_rx_descriptor_queue(x)
#define dump_rx_status_queue(x)
#define dump_tx_descriptor_queue(x)
#define dump_tx_status_queue(x)
#endif  /* defined(EP93XX_MAC_DEBUG) */

/**
 * Reset the EP93xx MAC by twiddling the soft reset bit and spinning until
 * it's cleared.
 */
static void ep93xx_mac_reset(struct eth_device *dev)
{
        struct mac_regs *mac = GET_REGS(dev);
        uint32_t value;

        debug("+ep93xx_mac_reset");

        value = readl(&mac->selfctl);
        value |= SELFCTL_RESET;
        writel(value, &mac->selfctl);

        while (readl(&mac->selfctl) & SELFCTL_RESET)
                ; /* noop */

        debug("-ep93xx_mac_reset");
}

/* Eth device open */
static int ep93xx_eth_open(struct eth_device *dev, struct bd_info *bd)
{
        struct ep93xx_priv *priv = GET_PRIV(dev);
        struct mac_regs *mac = GET_REGS(dev);
        uchar *mac_addr = dev->enetaddr;
        int i;

        debug("+ep93xx_eth_open");

        /* Reset the MAC */
        ep93xx_mac_reset(dev);

        /* Reset the descriptor queues' current and end address values */
        priv->tx_dq.current = priv->tx_dq.base;
        priv->tx_dq.end = (priv->tx_dq.base + NUMTXDESC);

        priv->tx_sq.current = priv->tx_sq.base;
        priv->tx_sq.end = (priv->tx_sq.base + NUMTXDESC);

        priv->rx_dq.current = priv->rx_dq.base;
        priv->rx_dq.end = (priv->rx_dq.base + NUMRXDESC);

        priv->rx_sq.current = priv->rx_sq.base;
        priv->rx_sq.end = (priv->rx_sq.base + NUMRXDESC);

        /*
         * Set the transmit descriptor and status queues' base address,
         * current address, and length registers.  Set the maximum frame
         * length and threshold. Enable the transmit descriptor processor.
         */
        writel((uint32_t)priv->tx_dq.base, &mac->txdq.badd);
        writel((uint32_t)priv->tx_dq.base, &mac->txdq.curadd);
        writel(sizeof(struct tx_descriptor) * NUMTXDESC, &mac->txdq.blen);

        writel((uint32_t)priv->tx_sq.base, &mac->txstsq.badd);
        writel((uint32_t)priv->tx_sq.base, &mac->txstsq.curadd);
        writel(sizeof(struct tx_status) * NUMTXDESC, &mac->txstsq.blen);

        writel(0x00040000, &mac->txdthrshld);
        writel(0x00040000, &mac->txststhrshld);

        writel((TXSTARTMAX << 0) | (PKTSIZE_ALIGN << 16), &mac->maxfrmlen);
        writel(BMCTL_TXEN, &mac->bmctl);

        /*
         * Set the receive descriptor and status queues' base address,
         * current address, and length registers.  Enable the receive
         * descriptor processor.
         */
        writel((uint32_t)priv->rx_dq.base, &mac->rxdq.badd);
        writel((uint32_t)priv->rx_dq.base, &mac->rxdq.curadd);
        writel(sizeof(struct rx_descriptor) * NUMRXDESC, &mac->rxdq.blen);

        writel((uint32_t)priv->rx_sq.base, &mac->rxstsq.badd);
        writel((uint32_t)priv->rx_sq.base, &mac->rxstsq.curadd);
        writel(sizeof(struct rx_status) * NUMRXDESC, &mac->rxstsq.blen);

        writel(0x00040000, &mac->rxdthrshld);

        writel(BMCTL_RXEN, &mac->bmctl);

        writel(0x00040000, &mac->rxststhrshld);

        /* Wait until the receive descriptor processor is active */
        while (!(readl(&mac->bmsts) & BMSTS_RXACT))
                ; /* noop */

        /*
         * Initialize the RX descriptor queue. Clear the TX descriptor queue.
         * Clear the RX and TX status queues. Enqueue the RX descriptor and
         * status entries to the MAC.
         */
        for (i = 0; i < NUMRXDESC; i++) {
                /* set buffer address */
                (priv->rx_dq.base + i)->word1 = (uint32_t)net_rx_packets[i];

                /* set buffer length, clear buffer index and NSOF */
                (priv->rx_dq.base + i)->word2 = PKTSIZE_ALIGN;
        }

        memset(priv->tx_dq.base, 0,
                (sizeof(struct tx_descriptor) * NUMTXDESC));
        memset(priv->rx_sq.base, 0,
                (sizeof(struct rx_status) * NUMRXDESC));
        memset(priv->tx_sq.base, 0,
                (sizeof(struct tx_status) * NUMTXDESC));

        writel(NUMRXDESC, &mac->rxdqenq);
        writel(NUMRXDESC, &mac->rxstsqenq);

        /* Set the primary MAC address */
        writel(AFP_IAPRIMARY, &mac->afp);
        writel(mac_addr[0] | (mac_addr[1] << 8) |
                (mac_addr[2] << 16) | (mac_addr[3] << 24),
                &mac->indad);
        writel(mac_addr[4] | (mac_addr[5] << 8), &mac->indad_upper);

        /* Turn on RX and TX */
        writel(RXCTL_IA0 | RXCTL_BA | RXCTL_SRXON |
                RXCTL_RCRCA | RXCTL_MA, &mac->rxctl);
        writel(TXCTL_STXON, &mac->txctl);

        /* Dump data structures if we're debugging */
        dump_dev(dev);
        dump_rx_descriptor_queue(dev);
        dump_rx_status_queue(dev);
        dump_tx_descriptor_queue(dev);
        dump_tx_status_queue(dev);

        debug("-ep93xx_eth_open");

        return 1;
}

/**
 * Halt EP93xx MAC transmit and receive by clearing the TxCTL and RxCTL
 * registers.
 */
static void ep93xx_eth_close(struct eth_device *dev)
{
        struct mac_regs *mac = GET_REGS(dev);

        debug("+ep93xx_eth_close");

        writel(0x00000000, &mac->rxctl);
        writel(0x00000000, &mac->txctl);

        debug("-ep93xx_eth_close");
}

/**
 * Copy a frame of data from the MAC into the protocol layer for further
 * processing.
 */
static int ep93xx_eth_rcv_packet(struct eth_device *dev)
{
        struct mac_regs *mac = GET_REGS(dev);
        struct ep93xx_priv *priv = GET_PRIV(dev);
        int len = -1;

        debug("+ep93xx_eth_rcv_packet");

        if (RX_STATUS_RFP(priv->rx_sq.current)) {
                if (RX_STATUS_RWE(priv->rx_sq.current)) {
                        /*
                         * We have a good frame. Extract the frame's length
                         * from the current rx_status_queue entry, and copy
                         * the frame's data into net_rx_packets[] of the
                         * protocol stack. We track the total number of
                         * bytes in the frame (nbytes_frame) which will be
                         * used when we pass the data off to the protocol
                         * layer via net_process_received_packet().
                         */
                        len = RX_STATUS_FRAME_LEN(priv->rx_sq.current);

                        net_process_received_packet(
                                (uchar *)priv->rx_dq.current->word1, len);

                        debug("reporting %d bytes...\n", len);
                } else {
                        /* Do we have an erroneous packet? */
                        pr_err("packet rx error, status %08X %08X",
                                priv->rx_sq.current->word1,
                                priv->rx_sq.current->word2);
                        dump_rx_descriptor_queue(dev);
                        dump_rx_status_queue(dev);
                }

                /*
                 * Clear the associated status queue entry, and
                 * increment our current pointers to the next RX
                 * descriptor and status queue entries (making sure
                 * we wrap properly).
                 */
                memset((void *)priv->rx_sq.current, 0,
                        sizeof(struct rx_status));

                priv->rx_sq.current++;
                if (priv->rx_sq.current >= priv->rx_sq.end)
                        priv->rx_sq.current = priv->rx_sq.base;

                priv->rx_dq.current++;
                if (priv->rx_dq.current >= priv->rx_dq.end)
                        priv->rx_dq.current = priv->rx_dq.base;

                /*
                 * Finally, return the RX descriptor and status entries
                 * back to the MAC engine, and loop again, checking for
                 * more descriptors to process.
                 */
                writel(1, &mac->rxdqenq);
                writel(1, &mac->rxstsqenq);
        } else {
                len = 0;
        }

        debug("-ep93xx_eth_rcv_packet %d", len);
        return len;
}

/**
 * Send a block of data via ethernet.
 */
static int ep93xx_eth_send_packet(struct eth_device *dev,
                                void * const packet, int const length)
{
        struct mac_regs *mac = GET_REGS(dev);
        struct ep93xx_priv *priv = GET_PRIV(dev);
        int ret = -1;

        debug("+ep93xx_eth_send_packet");

        /* Parameter check */
        BUG_ON(packet == NULL);

        /*
         * Initialize the TX descriptor queue with the new packet's info.
         * Clear the associated status queue entry. Enqueue the packet
         * to the MAC for transmission.
         */

        /* set buffer address */
        priv->tx_dq.current->word1 = (uint32_t)packet;

        /* set buffer length and EOF bit */
        priv->tx_dq.current->word2 = length | TX_DESC_EOF;

        /* clear tx status */
        priv->tx_sq.current->word1 = 0;

        /* enqueue the TX descriptor */
        writel(1, &mac->txdqenq);

        /* wait for the frame to become processed */
        while (!TX_STATUS_TXFP(priv->tx_sq.current))
                ; /* noop */

        if (!TX_STATUS_TXWE(priv->tx_sq.current)) {
                pr_err("packet tx error, status %08X",
                        priv->tx_sq.current->word1);
                dump_tx_descriptor_queue(dev);
                dump_tx_status_queue(dev);

                /* TODO: Add better error handling? */
                goto eth_send_out;
        }

        ret = 0;
        /* Fall through */

eth_send_out:
        debug("-ep93xx_eth_send_packet %d", ret);
        return ret;
}

#if defined(CONFIG_MII)
int ep93xx_miiphy_initialize(struct bd_info * const bd)
{
        int retval;
        struct mii_dev *mdiodev = mdio_alloc();
        if (!mdiodev)
                return -ENOMEM;
        strlcpy(mdiodev->name, "ep93xx_eth0", MDIO_NAME_LEN);
        mdiodev->read = ep93xx_miiphy_read;
        mdiodev->write = ep93xx_miiphy_write;

        retval = mdio_register(mdiodev);
        if (retval < 0)
                return retval;
        return 0;
}
#endif

/**
 * Initialize the EP93xx MAC.  The MAC hardware is reset.  Buffers are
 * allocated, if necessary, for the TX and RX descriptor and status queues,
 * as well as for received packets.  The EP93XX MAC hardware is initialized.
 * Transmit and receive operations are enabled.
 */
int ep93xx_eth_initialize(u8 dev_num, int base_addr)
{
        int ret = -1;
        struct eth_device *dev;
        struct ep93xx_priv *priv;

        debug("+ep93xx_eth_initialize");

        priv = malloc(sizeof(*priv));
        if (!priv) {
                pr_err("malloc() failed");
                goto eth_init_failed_0;
        }
        memset(priv, 0, sizeof(*priv));

        priv->regs = (struct mac_regs *)base_addr;

        priv->tx_dq.base = calloc(NUMTXDESC,
                                sizeof(struct tx_descriptor));
        if (priv->tx_dq.base == NULL) {
                pr_err("calloc() failed");
                goto eth_init_failed_1;
        }

        priv->tx_sq.base = calloc(NUMTXDESC,
                                sizeof(struct tx_status));
        if (priv->tx_sq.base == NULL) {
                pr_err("calloc() failed");
                goto eth_init_failed_2;
        }

        priv->rx_dq.base = calloc(NUMRXDESC,
                                sizeof(struct rx_descriptor));
        if (priv->rx_dq.base == NULL) {
                pr_err("calloc() failed");
                goto eth_init_failed_3;
        }

        priv->rx_sq.base = calloc(NUMRXDESC,
                                sizeof(struct rx_status));
        if (priv->rx_sq.base == NULL) {
                pr_err("calloc() failed");
                goto eth_init_failed_4;
        }

        dev = malloc(sizeof *dev);
        if (dev == NULL) {
                pr_err("malloc() failed");
                goto eth_init_failed_5;
        }
        memset(dev, 0, sizeof *dev);

        dev->iobase = base_addr;
        dev->priv = priv;
        dev->init = ep93xx_eth_open;
        dev->halt = ep93xx_eth_close;
        dev->send = ep93xx_eth_send_packet;
        dev->recv = ep93xx_eth_rcv_packet;

        sprintf(dev->name, "ep93xx_eth-%hu", dev_num);

        eth_register(dev);

        /* Done! */
        ret = 1;
        goto eth_init_done;

eth_init_failed_5:
        free(priv->rx_sq.base);
        /* Fall through */

eth_init_failed_4:
        free(priv->rx_dq.base);
        /* Fall through */

eth_init_failed_3:
        free(priv->tx_sq.base);
        /* Fall through */

eth_init_failed_2:
        free(priv->tx_dq.base);
        /* Fall through */

eth_init_failed_1:
        free(priv);
        /* Fall through */

eth_init_failed_0:
        /* Fall through */

eth_init_done:
        debug("-ep93xx_eth_initialize %d", ret);
        return ret;
}

#if defined(CONFIG_MII)

/**
 * Maximum MII address we support
 */
#define MII_ADDRESS_MAX                 31

/**
 * Maximum MII register address we support
 */
#define MII_REGISTER_MAX                31

/**
 * Read a 16-bit value from an MII register.
 */
static int ep93xx_miiphy_read(struct mii_dev *bus, int addr, int devad,
                              int reg)
{
        unsigned short value = 0;
        struct mac_regs *mac = (struct mac_regs *)MAC_BASE;
        int ret = -1;
        uint32_t self_ctl;

        debug("+ep93xx_miiphy_read");

        /* Parameter checks */
        BUG_ON(bus->name == NULL);
        BUG_ON(addr > MII_ADDRESS_MAX);
        BUG_ON(reg > MII_REGISTER_MAX);

        /*
         * Save the current SelfCTL register value.  Set MAC to suppress
         * preamble bits.  Wait for any previous MII command to complete
         * before issuing the new command.
         */
        self_ctl = readl(&mac->selfctl);
#if defined(CONFIG_MII_SUPPRESS_PREAMBLE)
        writel(self_ctl & ~(1 << 8), &mac->selfctl);
#endif  /* defined(CONFIG_MII_SUPPRESS_PREAMBLE) */

        while (readl(&mac->miists) & MIISTS_BUSY)
                ; /* noop */

        /*
         * Issue the MII 'read' command.  Wait for the command to complete.
         * Read the MII data value.
         */
        writel(MIICMD_OPCODE_READ | ((uint32_t)addr << 5) | (uint32_t)reg,
                &mac->miicmd);
        while (readl(&mac->miists) & MIISTS_BUSY)
                ; /* noop */

        value = (unsigned short)readl(&mac->miidata);

        /* Restore the saved SelfCTL value and return. */
        writel(self_ctl, &mac->selfctl);

        ret = 0;
        /* Fall through */

        debug("-ep93xx_miiphy_read");
        if (ret < 0)
                return ret;
        return value;
}

/**
 * Write a 16-bit value to an MII register.
 */
static int ep93xx_miiphy_write(struct mii_dev *bus, int addr, int devad,
                               int reg, u16 value)
{
        struct mac_regs *mac = (struct mac_regs *)MAC_BASE;
        int ret = -1;
        uint32_t self_ctl;

        debug("+ep93xx_miiphy_write");

        /* Parameter checks */
        BUG_ON(bus->name == NULL);
        BUG_ON(addr > MII_ADDRESS_MAX);
        BUG_ON(reg > MII_REGISTER_MAX);

        /*
         * Save the current SelfCTL register value.  Set MAC to suppress
         * preamble bits.  Wait for any previous MII command to complete
         * before issuing the new command.
         */
        self_ctl = readl(&mac->selfctl);
#if defined(CONFIG_MII_SUPPRESS_PREAMBLE)
        writel(self_ctl & ~(1 << 8), &mac->selfctl);
#endif  /* defined(CONFIG_MII_SUPPRESS_PREAMBLE) */

        while (readl(&mac->miists) & MIISTS_BUSY)
                ; /* noop */

        /* Issue the MII 'write' command.  Wait for the command to complete. */
        writel((uint32_t)value, &mac->miidata);
        writel(MIICMD_OPCODE_WRITE | ((uint32_t)addr << 5) | (uint32_t)reg,
                &mac->miicmd);
        while (readl(&mac->miists) & MIISTS_BUSY)
                ; /* noop */

        /* Restore the saved SelfCTL value and return. */
        writel(self_ctl, &mac->selfctl);

        ret = 0;
        /* Fall through */

        debug("-ep93xx_miiphy_write");
        return ret;
}
#endif  /* defined(CONFIG_MII) */