// SPDX-License-Identifier: GPL-2.0+
/*
 * ENETC ethernet controller driver
 * Copyright 2017-2021 NXP
 */

#include <common.h>
#include <dm.h>
#include <errno.h>
#include <fdt_support.h>
#include <malloc.h>
#include <memalign.h>
#include <net.h>
#include <asm/cache.h>
#include <asm/io.h>
#include <pci.h>
#include <miiphy.h>
#include <linux/bug.h>
#include <linux/delay.h>

#include "fsl_enetc.h"

#define ENETC_DRIVER_NAME       "enetc_eth"

/*
 * sets the MAC address in IERB registers, this setting is persistent and
 * carried over to Linux.
 */
static void enetc_set_ierb_primary_mac(struct udevice *dev, int devfn,
                                       const u8 *enetaddr)
{
#ifdef CONFIG_ARCH_LS1028A
/*
 * LS1028A is the only part with IERB at this time and there are plans to change
 * its structure, keep this LS1028A specific for now
 */
#define IERB_BASE               0x1f0800000ULL
#define IERB_PFMAC(pf, vf, n)   (IERB_BASE + 0x8000 + (pf) * 0x100 + (vf) * 8 \
                                 + (n) * 4)

static int ierb_fn_to_pf[] = {0, 1, 2, -1, -1, -1, 3};

        u16 lower = *(const u16 *)(enetaddr + 4);
        u32 upper = *(const u32 *)enetaddr;

        if (ierb_fn_to_pf[devfn] < 0)
                return;

        out_le32(IERB_PFMAC(ierb_fn_to_pf[devfn], 0, 0), upper);
        out_le32(IERB_PFMAC(ierb_fn_to_pf[devfn], 0, 1), (u32)lower);
#endif
}

/* sets up primary MAC addresses in DT/IERB */
void fdt_fixup_enetc_mac(void *blob)
{
        struct pci_child_plat *ppdata;
        struct eth_pdata *pdata;
        struct udevice *dev;
        struct uclass *uc;
        char path[256];
        int offset;
        int devfn;

        uclass_get(UCLASS_ETH, &uc);
        uclass_foreach_dev(dev, uc) {
                if (!dev->driver || !dev->driver->name ||
                    strcmp(dev->driver->name, ENETC_DRIVER_NAME))
                        continue;

                pdata = dev_get_plat(dev);
                ppdata = dev_get_parent_plat(dev);
                devfn = PCI_FUNC(ppdata->devfn);

                enetc_set_ierb_primary_mac(dev, devfn, pdata->enetaddr);

                snprintf(path, 256, "/soc/pcie@1f0000000/ethernet@%x,%x",
                         PCI_DEV(ppdata->devfn), PCI_FUNC(ppdata->devfn));
                offset = fdt_path_offset(blob, path);
                if (offset < 0)
                        continue;
                fdt_setprop(blob, offset, "mac-address", pdata->enetaddr, 6);
        }
}

/*
 * Bind the device:
 * - set a more explicit name on the interface
 */
static int enetc_bind(struct udevice *dev)
{
        char name[16];
        static int eth_num_devices;

        /*
         * prefer using PCI function numbers to number interfaces, but these
         * are only available if dts nodes are present.  For PCI they are
         * optional, handle that case too.  Just in case some nodes are present
         * and some are not, use different naming scheme - enetc-N based on
         * PCI function # and enetc#N based on interface count
         */
        if (ofnode_valid(dev_ofnode(dev)))
                sprintf(name, "enetc-%u", PCI_FUNC(pci_get_devfn(dev)));
        else
                sprintf(name, "enetc#%u", eth_num_devices++);
        device_set_name(dev, name);

        return 0;
}

/* MDIO wrappers, we're using these to drive internal MDIO to get to serdes */
static int enetc_mdio_read(struct mii_dev *bus, int addr, int devad, int reg)
{
        struct enetc_mdio_priv priv;

        priv.regs_base = bus->priv;
        return enetc_mdio_read_priv(&priv, addr, devad, reg);
}

static int enetc_mdio_write(struct mii_dev *bus, int addr, int devad, int reg,
                            u16 val)
{
        struct enetc_mdio_priv priv;

        priv.regs_base = bus->priv;
        return enetc_mdio_write_priv(&priv, addr, devad, reg, val);
}

/* only interfaces that can pin out through serdes have internal MDIO */
static bool enetc_has_imdio(struct udevice *dev)
{
        struct enetc_priv *priv = dev_get_priv(dev);

        return !!(priv->imdio.priv);
}

/* set up serdes for SGMII */
static int enetc_init_sgmii(struct udevice *dev)
{
        struct enetc_priv *priv = dev_get_priv(dev);
        bool is2500 = false;
        u16 reg;

        if (!enetc_has_imdio(dev))
                return 0;

        if (priv->if_type == PHY_INTERFACE_MODE_2500BASEX)
                is2500 = true;

        /*
         * Set to SGMII mode, for 1Gbps enable AN, for 2.5Gbps set fixed speed.
         * Although fixed speed is 1Gbps, we could be running at 2.5Gbps based
         * on PLL configuration.  Setting 1G for 2.5G here is counter intuitive
         * but intentional.
         */
        reg = ENETC_PCS_IF_MODE_SGMII;
        reg |= is2500 ? ENETC_PCS_IF_MODE_SPEED_1G : ENETC_PCS_IF_MODE_SGMII_AN;
        enetc_mdio_write(&priv->imdio, ENETC_PCS_PHY_ADDR, MDIO_DEVAD_NONE,
                         ENETC_PCS_IF_MODE, reg);

        /* Dev ability - SGMII */
        enetc_mdio_write(&priv->imdio, ENETC_PCS_PHY_ADDR, MDIO_DEVAD_NONE,
                         ENETC_PCS_DEV_ABILITY, ENETC_PCS_DEV_ABILITY_SGMII);

        /* Adjust link timer for SGMII */
        enetc_mdio_write(&priv->imdio, ENETC_PCS_PHY_ADDR, MDIO_DEVAD_NONE,
                         ENETC_PCS_LINK_TIMER1, ENETC_PCS_LINK_TIMER1_VAL);
        enetc_mdio_write(&priv->imdio, ENETC_PCS_PHY_ADDR, MDIO_DEVAD_NONE,
                         ENETC_PCS_LINK_TIMER2, ENETC_PCS_LINK_TIMER2_VAL);

        reg = ENETC_PCS_CR_DEF_VAL;
        reg |= is2500 ? ENETC_PCS_CR_RST : ENETC_PCS_CR_RESET_AN;
        /* restart PCS AN */
        enetc_mdio_write(&priv->imdio, ENETC_PCS_PHY_ADDR, MDIO_DEVAD_NONE,
                         ENETC_PCS_CR, reg);

        return 0;
}

/* set up MAC for RGMII */
static void enetc_init_rgmii(struct udevice *dev, struct phy_device *phydev)
{
        struct enetc_priv *priv = dev_get_priv(dev);
        u32 old_val, val;

        old_val = val = enetc_read_port(priv, ENETC_PM_IF_MODE);

        /* disable unreliable RGMII in-band signaling and force the MAC into
         * the speed negotiated by the PHY.
         */
        val &= ~ENETC_PM_IF_MODE_AN_ENA;

        if (phydev->speed == SPEED_1000) {
                val &= ~ENETC_PM_IFM_SSP_MASK;
                val |= ENETC_PM_IFM_SSP_1000;
        } else if (phydev->speed == SPEED_100) {
                val &= ~ENETC_PM_IFM_SSP_MASK;
                val |= ENETC_PM_IFM_SSP_100;
        } else if (phydev->speed == SPEED_10) {
                val &= ~ENETC_PM_IFM_SSP_MASK;
                val |= ENETC_PM_IFM_SSP_10;
        }

        if (phydev->duplex == DUPLEX_FULL)
                val |= ENETC_PM_IFM_FULL_DPX;
        else
                val &= ~ENETC_PM_IFM_FULL_DPX;

        if (val == old_val)
                return;

        enetc_write_port(priv, ENETC_PM_IF_MODE, val);
}

/* set up MAC configuration for the given interface type */
static void enetc_setup_mac_iface(struct udevice *dev,
                                  struct phy_device *phydev)
{
        struct enetc_priv *priv = dev_get_priv(dev);
        u32 if_mode;

        switch (priv->if_type) {
        case PHY_INTERFACE_MODE_RGMII:
        case PHY_INTERFACE_MODE_RGMII_ID:
        case PHY_INTERFACE_MODE_RGMII_RXID:
        case PHY_INTERFACE_MODE_RGMII_TXID:
                enetc_init_rgmii(dev, phydev);
                break;
        case PHY_INTERFACE_MODE_USXGMII:
        case PHY_INTERFACE_MODE_10GBASER:
                /* set ifmode to (US)XGMII */
                if_mode = enetc_read_port(priv, ENETC_PM_IF_MODE);
                if_mode &= ~ENETC_PM_IF_IFMODE_MASK;
                enetc_write_port(priv, ENETC_PM_IF_MODE, if_mode);
                break;
        };
}

/* set up serdes for SXGMII */
static int enetc_init_sxgmii(struct udevice *dev)
{
        struct enetc_priv *priv = dev_get_priv(dev);

        if (!enetc_has_imdio(dev))
                return 0;

        /* Dev ability - SXGMII */
        enetc_mdio_write(&priv->imdio, ENETC_PCS_PHY_ADDR, ENETC_PCS_DEVAD_REPL,
                         ENETC_PCS_DEV_ABILITY, ENETC_PCS_DEV_ABILITY_SXGMII);

        /* Restart PCS AN */
        enetc_mdio_write(&priv->imdio, ENETC_PCS_PHY_ADDR, ENETC_PCS_DEVAD_REPL,
                         ENETC_PCS_CR,
                         ENETC_PCS_CR_RST | ENETC_PCS_CR_RESET_AN);

        return 0;
}

/* Apply protocol specific configuration to MAC, serdes as needed */
static void enetc_start_pcs(struct udevice *dev)
{
        struct enetc_priv *priv = dev_get_priv(dev);
        const char *if_str;

        priv->if_type = PHY_INTERFACE_MODE_NONE;

        /* register internal MDIO for debug purposes */
        if (enetc_read_port(priv, ENETC_PCAPR0) & ENETC_PCAPRO_MDIO) {
                priv->imdio.read = enetc_mdio_read;
                priv->imdio.write = enetc_mdio_write;
                priv->imdio.priv = priv->port_regs + ENETC_PM_IMDIO_BASE;
                strlcpy(priv->imdio.name, dev->name, MDIO_NAME_LEN);
                if (!miiphy_get_dev_by_name(priv->imdio.name))
                        mdio_register(&priv->imdio);
        }

        if (!ofnode_valid(dev_ofnode(dev))) {
                enetc_dbg(dev, "no enetc ofnode found, skipping PCS set-up\n");
                return;
        }

        if_str = ofnode_read_string(dev_ofnode(dev), "phy-mode");
        if (if_str)
                priv->if_type = phy_get_interface_by_name(if_str);
        else
                enetc_dbg(dev,
                          "phy-mode property not found, defaulting to SGMII\n");
        if (priv->if_type < 0)
                priv->if_type = PHY_INTERFACE_MODE_NONE;

        switch (priv->if_type) {
        case PHY_INTERFACE_MODE_SGMII:
        case PHY_INTERFACE_MODE_2500BASEX:
                enetc_init_sgmii(dev);
                break;
        case PHY_INTERFACE_MODE_USXGMII:
        case PHY_INTERFACE_MODE_10GBASER:
                enetc_init_sxgmii(dev);
                break;
        };
}

/* Configure the actual/external ethernet PHY, if one is found */
static int enetc_config_phy(struct udevice *dev)
{
        struct enetc_priv *priv = dev_get_priv(dev);
        int supported;

        priv->phy = dm_eth_phy_connect(dev);
        if (!priv->phy)
                return -ENODEV;

        supported = PHY_GBIT_FEATURES | SUPPORTED_2500baseX_Full;
        priv->phy->supported &= supported;
        priv->phy->advertising &= supported;

        return phy_config(priv->phy);
}

/*
 * Probe ENETC driver:
 * - initialize port and station interface BARs
 */
static int enetc_probe(struct udevice *dev)
{
        struct enetc_priv *priv = dev_get_priv(dev);

        if (ofnode_valid(dev_ofnode(dev)) && !ofnode_is_available(dev_ofnode(dev))) {
                enetc_dbg(dev, "interface disabled\n");
                return -ENODEV;
        }

        priv->enetc_txbd = memalign(ENETC_BD_ALIGN,
                                    sizeof(struct enetc_tx_bd) * ENETC_BD_CNT);
        priv->enetc_rxbd = memalign(ENETC_BD_ALIGN,
                                    sizeof(union enetc_rx_bd) * ENETC_BD_CNT);

        if (!priv->enetc_txbd || !priv->enetc_rxbd) {
                /* free should be able to handle NULL, just free all pointers */
                free(priv->enetc_txbd);
                free(priv->enetc_rxbd);

                return -ENOMEM;
        }

        /* initialize register */
        priv->regs_base = dm_pci_map_bar(dev, PCI_BASE_ADDRESS_0, 0);
        if (!priv->regs_base) {
                enetc_dbg(dev, "failed to map BAR0\n");
                return -EINVAL;
        }
        priv->port_regs = priv->regs_base + ENETC_PORT_REGS_OFF;

        dm_pci_clrset_config16(dev, PCI_COMMAND, 0, PCI_COMMAND_MEMORY);

        enetc_start_pcs(dev);

        return enetc_config_phy(dev);
}

/*
 * Remove the driver from an interface:
 * - free up allocated memory
 */
static int enetc_remove(struct udevice *dev)
{
        struct enetc_priv *priv = dev_get_priv(dev);

        free(priv->enetc_txbd);
        free(priv->enetc_rxbd);

        return 0;
}

/*
 * LS1028A is the only part with IERB at this time and there are plans to
 * change its structure, keep this LS1028A specific for now.
 */
#define LS1028A_IERB_BASE               0x1f0800000ULL
#define LS1028A_IERB_PSIPMAR0(pf, vf)   (LS1028A_IERB_BASE + 0x8000 \
                                         + (pf) * 0x100 + (vf) * 8)
#define LS1028A_IERB_PSIPMAR1(pf, vf)   (LS1028A_IERB_PSIPMAR0(pf, vf) + 4)

static int enetc_ls1028a_write_hwaddr(struct udevice *dev)
{
        struct pci_child_plat *ppdata = dev_get_parent_plat(dev);
        const int devfn_to_pf[] = {0, 1, 2, -1, -1, -1, 3};
        struct eth_pdata *plat = dev_get_plat(dev);
        int devfn = PCI_FUNC(ppdata->devfn);
        u8 *addr = plat->enetaddr;
        u32 lower, upper;
        int pf;

        if (devfn >= ARRAY_SIZE(devfn_to_pf))
                return 0;

        pf = devfn_to_pf[devfn];
        if (pf < 0)
                return 0;

        lower = *(const u16 *)(addr + 4);
        upper = *(const u32 *)addr;

        out_le32(LS1028A_IERB_PSIPMAR0(pf, 0), upper);
        out_le32(LS1028A_IERB_PSIPMAR1(pf, 0), lower);

        return 0;
}

static int enetc_write_hwaddr(struct udevice *dev)
{
        struct eth_pdata *plat = dev_get_plat(dev);
        struct enetc_priv *priv = dev_get_priv(dev);
        u8 *addr = plat->enetaddr;

        if (IS_ENABLED(CONFIG_ARCH_LS1028A))
                return enetc_ls1028a_write_hwaddr(dev);

        u16 lower = *(const u16 *)(addr + 4);
        u32 upper = *(const u32 *)addr;

        enetc_write_port(priv, ENETC_PSIPMAR0, upper);
        enetc_write_port(priv, ENETC_PSIPMAR1, lower);

        return 0;
}

/* Configure port parameters (# of rings, frame size, enable port) */
static void enetc_enable_si_port(struct enetc_priv *priv)
{
        u32 val;

        /* set Rx/Tx BDR count */
        val = ENETC_PSICFGR_SET_TXBDR(ENETC_TX_BDR_CNT);
        val |= ENETC_PSICFGR_SET_RXBDR(ENETC_RX_BDR_CNT);
        enetc_write_port(priv, ENETC_PSICFGR(0), val);
        /* set Rx max frame size */
        enetc_write_port(priv, ENETC_PM_MAXFRM, ENETC_RX_MAXFRM_SIZE);
        /* enable MAC port */
        enetc_write_port(priv, ENETC_PM_CC, ENETC_PM_CC_RX_TX_EN);
        /* enable port */
        enetc_write_port(priv, ENETC_PMR, ENETC_PMR_SI0_EN);
        /* set SI cache policy */
        enetc_write(priv, ENETC_SICAR0,
                    ENETC_SICAR_RD_CFG | ENETC_SICAR_WR_CFG);
        /* enable SI */
        enetc_write(priv, ENETC_SIMR, ENETC_SIMR_EN);
}

/* returns DMA address for a given buffer index */
static inline u64 enetc_rxb_address(struct udevice *dev, int i)
{
        return cpu_to_le64(dm_pci_virt_to_mem(dev, net_rx_packets[i]));
}

/*
 * Setup a single Tx BD Ring (ID = 0):
 * - set Tx buffer descriptor address
 * - set the BD count
 * - initialize the producer and consumer index
 */
static void enetc_setup_tx_bdr(struct udevice *dev)
{
        struct enetc_priv *priv = dev_get_priv(dev);
        struct bd_ring *tx_bdr = &priv->tx_bdr;
        u64 tx_bd_add = (u64)priv->enetc_txbd;

        /* used later to advance to the next Tx BD */
        tx_bdr->bd_count = ENETC_BD_CNT;
        tx_bdr->next_prod_idx = 0;
        tx_bdr->next_cons_idx = 0;
        tx_bdr->cons_idx = priv->regs_base +
                                ENETC_BDR(TX, ENETC_TX_BDR_ID, ENETC_TBCIR);
        tx_bdr->prod_idx = priv->regs_base +
                                ENETC_BDR(TX, ENETC_TX_BDR_ID, ENETC_TBPIR);

        /* set Tx BD address */
        enetc_bdr_write(priv, TX, ENETC_TX_BDR_ID, ENETC_TBBAR0,
                        lower_32_bits(tx_bd_add));
        enetc_bdr_write(priv, TX, ENETC_TX_BDR_ID, ENETC_TBBAR1,
                        upper_32_bits(tx_bd_add));
        /* set Tx 8 BD count */
        enetc_bdr_write(priv, TX, ENETC_TX_BDR_ID, ENETC_TBLENR,
                        tx_bdr->bd_count);

        /* reset both producer/consumer indexes */
        enetc_write_reg(tx_bdr->cons_idx, tx_bdr->next_cons_idx);
        enetc_write_reg(tx_bdr->prod_idx, tx_bdr->next_prod_idx);

        /* enable TX ring */
        enetc_bdr_write(priv, TX, ENETC_TX_BDR_ID, ENETC_TBMR, ENETC_TBMR_EN);
}

/*
 * Setup a single Rx BD Ring (ID = 0):
 * - set Rx buffer descriptors address (one descriptor per buffer)
 * - set buffer size as max frame size
 * - enable Rx ring
 * - reset consumer and producer indexes
 * - set buffer for each descriptor
 */
static void enetc_setup_rx_bdr(struct udevice *dev)
{
        struct enetc_priv *priv = dev_get_priv(dev);
        struct bd_ring *rx_bdr = &priv->rx_bdr;
        u64 rx_bd_add = (u64)priv->enetc_rxbd;
        int i;

        /* used later to advance to the next BD produced by ENETC HW */
        rx_bdr->bd_count = ENETC_BD_CNT;
        rx_bdr->next_prod_idx = 0;
        rx_bdr->next_cons_idx = 0;
        rx_bdr->cons_idx = priv->regs_base +
                                ENETC_BDR(RX, ENETC_RX_BDR_ID, ENETC_RBCIR);
        rx_bdr->prod_idx = priv->regs_base +
                                ENETC_BDR(RX, ENETC_RX_BDR_ID, ENETC_RBPIR);

        /* set Rx BD address */
        enetc_bdr_write(priv, RX, ENETC_RX_BDR_ID, ENETC_RBBAR0,
                        lower_32_bits(rx_bd_add));
        enetc_bdr_write(priv, RX, ENETC_RX_BDR_ID, ENETC_RBBAR1,
                        upper_32_bits(rx_bd_add));
        /* set Rx BD count (multiple of 8) */
        enetc_bdr_write(priv, RX, ENETC_RX_BDR_ID, ENETC_RBLENR,
                        rx_bdr->bd_count);
        /* set Rx buffer  size */
        enetc_bdr_write(priv, RX, ENETC_RX_BDR_ID, ENETC_RBBSR, PKTSIZE_ALIGN);

        /* fill Rx BD */
        memset(priv->enetc_rxbd, 0,
               rx_bdr->bd_count * sizeof(union enetc_rx_bd));
        for (i = 0; i < rx_bdr->bd_count; i++) {
                priv->enetc_rxbd[i].w.addr = enetc_rxb_address(dev, i);
                /* each RX buffer must be aligned to 64B */
                WARN_ON(priv->enetc_rxbd[i].w.addr & (ARCH_DMA_MINALIGN - 1));
        }

        /* reset producer (ENETC owned) and consumer (SW owned) index */
        enetc_write_reg(rx_bdr->cons_idx, rx_bdr->next_cons_idx);
        enetc_write_reg(rx_bdr->prod_idx, rx_bdr->next_prod_idx);

        /* enable Rx ring */
        enetc_bdr_write(priv, RX, ENETC_RX_BDR_ID, ENETC_RBMR, ENETC_RBMR_EN);
}

/*
 * Start ENETC interface:
 * - perform FLR
 * - enable access to port and SI registers
 * - set mac address
 * - setup TX/RX buffer descriptors
 * - enable Tx/Rx rings
 */
static int enetc_start(struct udevice *dev)
{
        struct enetc_priv *priv = dev_get_priv(dev);

        /* reset and enable the PCI device */
        dm_pci_flr(dev);
        dm_pci_clrset_config16(dev, PCI_COMMAND, 0,
                               PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);

        enetc_enable_si_port(priv);

        /* setup Tx/Rx buffer descriptors */
        enetc_setup_tx_bdr(dev);
        enetc_setup_rx_bdr(dev);

        enetc_setup_mac_iface(dev, priv->phy);

        return phy_startup(priv->phy);
}

/*
 * Stop the network interface:
 * - just quiesce it, we can wipe all configuration as _start starts from
 * scratch each time
 */
static void enetc_stop(struct udevice *dev)
{
        /* FLR is sufficient to quiesce the device */
        dm_pci_flr(dev);
        /* leave the BARs accessible after we stop, this is needed to use
         * internal MDIO in command line.
         */
        dm_pci_clrset_config16(dev, PCI_COMMAND, 0, PCI_COMMAND_MEMORY);
}

/*
 * ENETC transmit packet:
 * - check if Tx BD ring is full
 * - set buffer/packet address (dma address)
 * - set final fragment flag
 * - try while producer index equals consumer index or timeout
 */
static int enetc_send(struct udevice *dev, void *packet, int length)
{
        struct enetc_priv *priv = dev_get_priv(dev);
        struct bd_ring *txr = &priv->tx_bdr;
        void *nv_packet = (void *)packet;
        int tries = ENETC_POLL_TRIES;
        u32 pi, ci;

        pi = txr->next_prod_idx;
        ci = enetc_read_reg(txr->cons_idx) & ENETC_BDR_IDX_MASK;
        /* Tx ring is full when */
        if (((pi + 1) % txr->bd_count) == ci) {
                enetc_dbg(dev, "Tx BDR full\n");
                return -ETIMEDOUT;
        }
        enetc_dbg(dev, "TxBD[%d]send: pkt_len=%d, buff @0x%x%08x\n", pi, length,
                  upper_32_bits((u64)nv_packet), lower_32_bits((u64)nv_packet));

        /* prepare Tx BD */
        memset(&priv->enetc_txbd[pi], 0x0, sizeof(struct enetc_tx_bd));
        priv->enetc_txbd[pi].addr =
                cpu_to_le64(dm_pci_virt_to_mem(dev, nv_packet));
        priv->enetc_txbd[pi].buf_len = cpu_to_le16(length);
        priv->enetc_txbd[pi].frm_len = cpu_to_le16(length);
        priv->enetc_txbd[pi].flags = cpu_to_le16(ENETC_TXBD_FLAGS_F);
        dmb();
        /* send frame: increment producer index */
        pi = (pi + 1) % txr->bd_count;
        txr->next_prod_idx = pi;
        enetc_write_reg(txr->prod_idx, pi);
        while ((--tries >= 0) &&
               (pi != (enetc_read_reg(txr->cons_idx) & ENETC_BDR_IDX_MASK)))
                udelay(10);

        return tries > 0 ? 0 : -ETIMEDOUT;
}

/*
 * Receive frame:
 * - wait for the next BD to get ready bit set
 * - clean up the descriptor
 * - move on and indicate to HW that the cleaned BD is available for Rx
 */
static int enetc_recv(struct udevice *dev, int flags, uchar **packetp)
{
        struct enetc_priv *priv = dev_get_priv(dev);
        struct bd_ring *rxr = &priv->rx_bdr;
        int tries = ENETC_POLL_TRIES;
        int pi = rxr->next_prod_idx;
        int ci = rxr->next_cons_idx;
        u32 status;
        int len;
        u8 rdy;

        do {
                dmb();
                status = le32_to_cpu(priv->enetc_rxbd[pi].r.lstatus);
                /* check if current BD is ready to be consumed */
                rdy = ENETC_RXBD_STATUS_R(status);
        } while (--tries >= 0 && !rdy);

        if (!rdy)
                return -EAGAIN;

        dmb();
        len = le16_to_cpu(priv->enetc_rxbd[pi].r.buf_len);
        *packetp = (uchar *)enetc_rxb_address(dev, pi);
        enetc_dbg(dev, "RxBD[%d]: len=%d err=%d pkt=0x%x%08x\n", pi, len,
                  ENETC_RXBD_STATUS_ERRORS(status),
                  upper_32_bits((u64)*packetp), lower_32_bits((u64)*packetp));

        /* BD clean up and advance to next in ring */
        memset(&priv->enetc_rxbd[pi], 0, sizeof(union enetc_rx_bd));
        priv->enetc_rxbd[pi].w.addr = enetc_rxb_address(dev, pi);
        rxr->next_prod_idx = (pi + 1) % rxr->bd_count;
        ci = (ci + 1) % rxr->bd_count;
        rxr->next_cons_idx = ci;
        dmb();
        /* free up the slot in the ring for HW */
        enetc_write_reg(rxr->cons_idx, ci);

        return len;
}

static const struct eth_ops enetc_ops = {
        .start  = enetc_start,
        .send   = enetc_send,
        .recv   = enetc_recv,
        .stop   = enetc_stop,
        .write_hwaddr = enetc_write_hwaddr,
};

U_BOOT_DRIVER(eth_enetc) = {
        .name   = ENETC_DRIVER_NAME,
        .id     = UCLASS_ETH,
        .bind   = enetc_bind,
        .probe  = enetc_probe,
        .remove = enetc_remove,
        .ops    = &enetc_ops,
        .priv_auto      = sizeof(struct enetc_priv),
        .plat_auto      = sizeof(struct eth_pdata),
};

static struct pci_device_id enetc_ids[] = {
        { PCI_DEVICE(PCI_VENDOR_ID_FREESCALE, PCI_DEVICE_ID_ENETC_ETH) },
        {}
};

U_BOOT_PCI_DEVICE(eth_enetc, enetc_ids);