uboot/drivers/serial/serial_omap.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0+
   2/*
   3 * Texas Instruments' OMAP serial driver
   4 *
   5 * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
   6 *      Lokesh Vutla <lokeshvutla@ti.com>
   7 */
   8
   9#include <common.h>
  10#include <dm.h>
  11#include <dt-structs.h>
  12#include <log.h>
  13#include <ns16550.h>
  14#include <serial.h>
  15#include <clk.h>
  16#include <linux/err.h>
  17
  18#ifndef CONFIG_SYS_NS16550_CLK
  19#define CONFIG_SYS_NS16550_CLK  0
  20#endif
  21
  22#ifdef CONFIG_DEBUG_UART_OMAP
  23
  24#ifndef CONFIG_SYS_NS16550_IER
  25#define CONFIG_SYS_NS16550_IER  0x00
  26#endif
  27
  28#define UART_MCRVAL 0x00
  29#define UART_LCRVAL UART_LCR_8N1
  30
  31static inline void serial_out_shift(void *addr, int shift, int value)
  32{
  33#ifdef CONFIG_SYS_NS16550_PORT_MAPPED
  34        outb(value, (ulong)addr);
  35#elif defined(CONFIG_SYS_NS16550_MEM32) && defined(CONFIG_SYS_LITTLE_ENDIAN)
  36        out_le32(addr, value);
  37#elif defined(CONFIG_SYS_NS16550_MEM32) && defined(CONFIG_SYS_BIG_ENDIAN)
  38        out_be32(addr, value);
  39#elif defined(CONFIG_SYS_NS16550_MEM32)
  40        writel(value, addr);
  41#elif defined(CONFIG_SYS_BIG_ENDIAN)
  42        writeb(value, addr + (1 << shift) - 1);
  43#else
  44        writeb(value, addr);
  45#endif
  46}
  47
  48static inline int serial_in_shift(void *addr, int shift)
  49{
  50#ifdef CONFIG_SYS_NS16550_PORT_MAPPED
  51        return inb((ulong)addr);
  52#elif defined(CONFIG_SYS_NS16550_MEM32) && defined(CONFIG_SYS_LITTLE_ENDIAN)
  53        return in_le32(addr);
  54#elif defined(CONFIG_SYS_NS16550_MEM32) && defined(CONFIG_SYS_BIG_ENDIAN)
  55        return in_be32(addr);
  56#elif defined(CONFIG_SYS_NS16550_MEM32)
  57        return readl(addr);
  58#elif defined(CONFIG_SYS_BIG_ENDIAN)
  59        return readb(addr + (1 << shift) - 1);
  60#else
  61        return readb(addr);
  62#endif
  63}
  64
  65#include <debug_uart.h>
  66
  67static inline void _debug_uart_init(void)
  68{
  69        struct ns16550 *com_port = (struct ns16550 *)CONFIG_DEBUG_UART_BASE;
  70        int baud_divisor;
  71
  72        baud_divisor = ns16550_calc_divisor(com_port, CONFIG_DEBUG_UART_CLOCK,
  73                                            CONFIG_BAUDRATE);
  74        serial_dout(&com_port->ier, CONFIG_SYS_NS16550_IER);
  75        serial_dout(&com_port->mdr1, 0x7);
  76        serial_dout(&com_port->mcr, UART_MCRVAL);
  77        serial_dout(&com_port->fcr, UART_FCR_DEFVAL);
  78
  79        serial_dout(&com_port->lcr, UART_LCR_BKSE | UART_LCRVAL);
  80        serial_dout(&com_port->dll, baud_divisor & 0xff);
  81        serial_dout(&com_port->dlm, (baud_divisor >> 8) & 0xff);
  82        serial_dout(&com_port->lcr, UART_LCRVAL);
  83        serial_dout(&com_port->mdr1, 0x0);
  84}
  85
  86static inline void _debug_uart_putc(int ch)
  87{
  88        struct ns16550 *com_port = (struct ns16550 *)CONFIG_DEBUG_UART_BASE;
  89
  90        while (!(serial_din(&com_port->lsr) & UART_LSR_THRE))
  91                ;
  92        serial_dout(&com_port->thr, ch);
  93}
  94
  95DEBUG_UART_FUNCS
  96
  97#endif
  98
  99#if CONFIG_IS_ENABLED(DM_SERIAL)
 100
 101#if CONFIG_IS_ENABLED(OF_REAL)
 102static int omap_serial_of_to_plat(struct udevice *dev)
 103{
 104        struct ns16550_plat *plat = dev_get_plat(dev);
 105        fdt_addr_t addr;
 106        struct clk clk;
 107        int err;
 108
 109        /* try Processor Local Bus device first */
 110        addr = dev_read_addr(dev);
 111        if (addr == FDT_ADDR_T_NONE)
 112                return -EINVAL;
 113
 114        plat->base = (unsigned long)map_physmem(addr, 0, MAP_NOCACHE);
 115
 116        plat->reg_offset = dev_read_u32_default(dev, "reg-offset", 0);
 117        plat->reg_shift = 2;
 118
 119        err = clk_get_by_index(dev, 0, &clk);
 120        if (!err) {
 121                err = clk_get_rate(&clk);
 122                if (!IS_ERR_VALUE(err))
 123                        plat->clock = err;
 124        } else if (err != -ENOENT && err != -ENODEV && err != -ENOSYS) {
 125                debug("omap serial failed to get clock\n");
 126                return err;
 127        }
 128
 129        if (!plat->clock)
 130                plat->clock = dev_read_u32_default(dev, "clock-frequency",
 131                                                   CONFIG_SYS_NS16550_CLK);
 132        if (!plat->clock) {
 133                debug("omap serial clock not defined\n");
 134                return -EINVAL;
 135        }
 136
 137        plat->fcr = UART_FCR_DEFVAL;
 138
 139        return 0;
 140}
 141
 142static const struct udevice_id omap_serial_ids[] = {
 143        { .compatible = "ti,omap2-uart", },
 144        { .compatible = "ti,omap3-uart", },
 145        { .compatible = "ti,omap4-uart", },
 146        { .compatible = "ti,am3352-uart", },
 147        { .compatible = "ti,am4372-uart", },
 148        { .compatible = "ti,dra742-uart", },
 149        { .compatible = "ti,am654-uart", },
 150        {}
 151};
 152#endif /* OF_REAL */
 153
 154#if CONFIG_IS_ENABLED(SERIAL_PRESENT)
 155U_BOOT_DRIVER(omap_serial) = {
 156        .name   = "omap_serial",
 157        .id     = UCLASS_SERIAL,
 158#if CONFIG_IS_ENABLED(OF_REAL)
 159        .of_match = omap_serial_ids,
 160        .of_to_plat = omap_serial_of_to_plat,
 161        .plat_auto      = sizeof(struct ns16550_plat),
 162#endif
 163        .priv_auto      = sizeof(struct ns16550),
 164        .probe = ns16550_serial_probe,
 165        .ops    = &ns16550_serial_ops,
 166#if !CONFIG_IS_ENABLED(OF_CONTROL)
 167        .flags  = DM_FLAG_PRE_RELOC,
 168#endif
 169};
 170#endif
 171#endif /* DM_SERIAL */
 172