1/* SPDX-License-Identifier: GPL-2.0+ */ 2/* 3 * (C) Copyright 2000-2009 4 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 5 */ 6 7#ifndef __CONSOLE_H 8#define __CONSOLE_H 9 10#include <stdbool.h> 11#include <stdio_dev.h> 12#include <linux/errno.h> 13 14extern char console_buffer[]; 15 16/* common/console.c */ 17int console_init_f(void); /* Before relocation; uses the serial stuff */ 18int console_init_r(void); /* After relocation; uses the console stuff */ 19int console_start(int file, struct stdio_dev *sdev); /* Start a console device */ 20void console_stop(int file, struct stdio_dev *sdev); /* Stop a console device */ 21int console_assign(int file, const char *devname); /* Assign the console */ 22int ctrlc(void); 23int had_ctrlc(void); /* have we had a Control-C since last clear? */ 24void clear_ctrlc(void); /* clear the Control-C condition */ 25int disable_ctrlc(int); /* 1 to disable, 0 to enable Control-C detect */ 26int confirm_yesno(void); /* 1 if input is "y", "Y", "yes" or "YES" */ 27 28/** 29 * console_search_dev() - search for stdio device with given flags and name 30 * @flags: device flags as per input/output/system 31 * @name: device name 32 * 33 * Iterates over registered STDIO devices and match them with given @flags 34 * and @name. 35 * 36 * @return pointer to the &struct stdio_dev if found, or NULL otherwise 37 */ 38struct stdio_dev *console_search_dev(int flags, const char *name); 39 40#ifdef CONFIG_CONSOLE_RECORD 41/** 42 * console_record_init() - set up the console recording buffers 43 * 44 * This should be called as soon as malloc() is available so that the maximum 45 * amount of console output can be recorded. 46 * 47 * @return 0 if OK, -ENOMEM if out of memory 48 */ 49int console_record_init(void); 50 51/** 52 * console_record_reset() - reset the console recording buffers 53 * 54 * Removes any data in the buffers 55 */ 56void console_record_reset(void); 57 58/** 59 * console_record_reset_enable() - reset and enable the console buffers 60 * 61 * This should be called to enable the console buffer. 62 * 63 * @return 0 (always) 64 */ 65int console_record_reset_enable(void); 66 67/** 68 * console_record_readline() - Read a line from the console output 69 * 70 * This reads the next available line from the console output previously 71 * recorded. 72 * 73 * @str: Place to put string 74 * @maxlen: Maximum length of @str including nul terminator 75 * @return length of string returned, or -ENOSPC if the console buffer was 76 * overflowed by the output 77 */ 78int console_record_readline(char *str, int maxlen); 79 80/** 81 * console_record_avail() - Get the number of available bytes in console output 82 * 83 * @return available bytes (0 if empty) 84 */ 85int console_record_avail(void); 86 87/** 88 * console_in_puts() - Write a string to the console input buffer 89 * 90 * This writes the given string to the console_in buffer which will then be 91 * returned if a function calls e.g. `getc()` 92 * 93 * @str: the string to write 94 * @return the number of bytes added 95 */ 96int console_in_puts(const char *str); 97#else 98static inline int console_record_init(void) 99{ 100 /* Always succeed, since it is not enabled */ 101 102 return 0; 103} 104 105static inline void console_record_reset(void) 106{ 107 /* Nothing to do here */ 108} 109 110static inline int console_record_reset_enable(void) 111{ 112 /* Cannot enable it as it is not supported */ 113 return -ENOSYS; 114} 115 116static inline int console_record_readline(char *str, int maxlen) 117{ 118 /* Nothing to read */ 119 return 0; 120} 121 122static inline int console_record_avail(void) 123{ 124 /* There is never anything available */ 125 return 0; 126} 127 128static inline int console_in_puts(const char *str) 129{ 130 /* There is never anything written */ 131 return 0; 132} 133 134#endif /* !CONFIG_CONSOLE_RECORD */ 135 136/** 137 * console_announce_r() - print a U-Boot console on non-serial consoles 138 * 139 * When U-Boot starts up with a display it generally does not announce itself 140 * on the display. The banner is instead emitted on the UART before relocation. 141 * This function prints a banner on devices which (we assume) did not receive 142 * it before relocation. 143 * 144 * @return 0 (meaning no errors) 145 */ 146int console_announce_r(void); 147 148/** 149 * console_puts_select_stderr() - Output a string to selected console devices 150 * 151 * This writes to stderr only. It is useful for outputting errors 152 * 153 * @serial_only: true to output only to serial, false to output to everything 154 * else 155 * @s: String to output 156 */ 157void console_puts_select_stderr(bool serial_only, const char *s); 158 159/* 160 * CONSOLE multiplexing. 161 */ 162#ifdef CONFIG_CONSOLE_MUX 163#include <iomux.h> 164#endif 165 166#endif 167