LXR uboot/include/lxt971a.h

   1/* SPDX-License-Identifier: GPL-2.0+ */
   2/***********************************************************************
   3 *
   4 * Copyright (C) 2004 by FS Forth-Systeme GmbH.
   5 * All rights reserved.
   6 *
   7 * $Id: ns9750_eth.h,v 1.2 2004/02/24 13:25:39 mpietrek Exp $
   8 * @Author: Markus Pietrek
   9 * @References: [1] NS9750 Hardware Reference, December 2003
  10 *              [2] Intel LXT971 Datasheet #249414 Rev. 02
  11 *              [3] NS7520 Linux Ethernet Driver
  12 */
  13
  14#ifndef __LXT971A_H__
  15#define __LXT971A_H__
  16
  17/* PHY definitions (LXT971A) [2] */
  18#define PHY_LXT971_PORT_CFG             (0x10)
  19#define PHY_LXT971_STAT2                (0x11)
  20#define PHY_LXT971_INT_ENABLE           (0x12)
  21#define PHY_LXT971_INT_STATUS           (0x13)
  22#define PHY_LXT971_LED_CFG              (0x14)
  23#define PHY_LXT971_DIG_CFG              (0x1A)
  24#define PHY_LXT971_TX_CTRL              (0x1E)
  25
  26/* PORT_CFG Port Configuration Register Bit Fields */
  27#define PHY_LXT971_PORT_CFG_RES1        (0x8000)
  28#define PHY_LXT971_PORT_CFG_FORCE_LNK   (0x4000)
  29#define PHY_LXT971_PORT_CFG_TX_DISABLE  (0x2000)
  30#define PHY_LXT971_PORT_CFG_BYPASS_SCR  (0x1000)
  31#define PHY_LXT971_PORT_CFG_RES2        (0x0800)
  32#define PHY_LXT971_PORT_CFG_JABBER      (0x0400)
  33#define PHY_LXT971_PORT_CFG_SQE         (0x0200)
  34#define PHY_LXT971_PORT_CFG_TP_LOOPBACK (0x0100)
  35#define PHY_LXT971_PORT_CFG_CRS_SEL     (0x0080)
  36#define PHY_LXT971_PORT_CFG_SLEEP_MODE  (0x0040)
  37#define PHY_LXT971_PORT_CFG_PRE_EN      (0x0020)
  38#define PHY_LXT971_PORT_CFG_SLEEP_T_MA  (0x0018)
  39#define PHY_LXT971_PORT_CFG_SLEEP_T_104 (0x0010)
  40#define PHY_LXT971_PORT_CFG_SLEEP_T_200 (0x0001)
  41#define PHY_LXT971_PORT_CFG_SLEEP_T_304 (0x0000)
  42#define PHY_LXT971_PORT_CFG_FLT_CODE_EN (0x0004)
  43#define PHY_LXT971_PORT_CFG_ALT_NP      (0x0002)
  44#define PHY_LXT971_PORT_CFG_FIBER_SEL   (0x0001)
  45
  46/* STAT2 Status Register #2 Bit Fields */
  47#define PHY_LXT971_STAT2_RES1           (0x8000)
  48#define PHY_LXT971_STAT2_100BTX         (0x4000)
  49#define PHY_LXT971_STAT2_TX_STATUS      (0x2000)
  50#define PHY_LXT971_STAT2_RX_STATUS      (0x1000)
  51#define PHY_LXT971_STAT2_COL_STATUS     (0x0800)
  52#define PHY_LXT971_STAT2_LINK           (0x0400)
  53#define PHY_LXT971_STAT2_DUPLEX_MODE    (0x0200)
  54#define PHY_LXT971_STAT2_AUTO_NEG       (0x0100)
  55#define PHY_LXT971_STAT2_AUTO_NEG_COMP  (0x0080)
  56#define PHY_LXT971_STAT2_RES2           (0x0040)
  57#define PHY_LXT971_STAT2_POLARITY       (0x0020)
  58#define PHY_LXT971_STAT2_PAUSE          (0x0010)
  59#define PHY_LXT971_STAT2_ERROR          (0x0008)
  60#define PHY_LXT971_STAT2_RES3           (0x0007)
  61
  62/* INT_ENABLE Interrupt Enable Register Bit Fields */
  63#define PHY_LXT971_INT_ENABLE_RES1      (0xFF00)
  64#define PHY_LXT971_INT_ENABLE_ANMSK     (0x0080)
  65#define PHY_LXT971_INT_ENABLE_SPEEDMSK  (0x0040)
  66#define PHY_LXT971_INT_ENABLE_DUPLEXMSK (0x0020)
  67#define PHY_LXT971_INT_ENABLE_LINKMSK   (0x0010)
  68#define PHY_LXT971_INT_ENABLE_RES2      (0x000C)
  69#define PHY_LXT971_INT_ENABLE_INTEN     (0x0002)
  70#define PHY_LXT971_INT_ENABLE_TINT      (0x0001)
  71
  72/* INT_STATUS Interrupt Status Register Bit Fields */
  73#define PHY_LXT971_INT_STATUS_RES1      (0xFF00)
  74#define PHY_LXT971_INT_STATUS_ANDONE    (0x0080)
  75#define PHY_LXT971_INT_STATUS_SPEEDCHG  (0x0040)
  76#define PHY_LXT971_INT_STATUS_DUPLEXCHG (0x0020)
  77#define PHY_LXT971_INT_STATUS_LINKCHG   (0x0010)
  78#define PHY_LXT971_INT_STATUS_RES2      (0x0008)
  79#define PHY_LXT971_INT_STATUS_MDINT     (0x0004)
  80#define PHY_LXT971_INT_STATUS_RES3      (0x0003)
  81
  82/* LED_CFG Interrupt LED Configuration Register Bit Fields */
  83#define PHY_LXT971_LED_CFG_SHIFT_LED1   (0x000C)
  84#define PHY_LXT971_LED_CFG_SHIFT_LED2   (0x0008)
  85#define PHY_LXT971_LED_CFG_SHIFT_LED3   (0x0004)
  86#define PHY_LXT971_LED_CFG_LEDFREQ_MA   (0x000C)
  87#define PHY_LXT971_LED_CFG_LEDFREQ_RES  (0x000C)
  88#define PHY_LXT971_LED_CFG_LEDFREQ_100  (0x0008)
  89#define PHY_LXT971_LED_CFG_LEDFREQ_60   (0x0004)
  90#define PHY_LXT971_LED_CFG_LEDFREQ_30   (0x0000)
  91#define PHY_LXT971_LED_CFG_PULSE_STR    (0x0002)
  92#define PHY_LXT971_LED_CFG_RES1         (0x0001)
  93
  94/* only one of these values must be shifted for each SHIFT_LED?  */
  95#define PHY_LXT971_LED_CFG_UNUSED1      (0x000F)
  96#define PHY_LXT971_LED_CFG_DUPLEX_COL   (0x000E)
  97#define PHY_LXT971_LED_CFG_LINK_ACT     (0x000D)
  98#define PHY_LXT971_LED_CFG_LINK_RX      (0x000C)
  99#define PHY_LXT971_LED_CFG_TEST_BLK_SLW (0x000B)
 100#define PHY_LXT971_LED_CFG_TEST_BLK_FST (0x000A)
 101#define PHY_LXT971_LED_CFG_TEST_OFF     (0x0009)
 102#define PHY_LXT971_LED_CFG_TEST_ON      (0x0008)
 103#define PHY_LXT971_LED_CFG_RX_OR_TX     (0x0007)
 104#define PHY_LXT971_LED_CFG_UNUSED2      (0x0006)
 105#define PHY_LXT971_LED_CFG_DUPLEX       (0x0005)
 106#define PHY_LXT971_LED_CFG_LINK         (0x0004)
 107#define PHY_LXT971_LED_CFG_COLLISION    (0x0003)
 108#define PHY_LXT971_LED_CFG_RECEIVE      (0x0002)
 109#define PHY_LXT971_LED_CFG_TRANSMIT     (0x0001)
 110#define PHY_LXT971_LED_CFG_SPEED        (0x0000)
 111
 112/* DIG_CFG Digitial Configuration Register Bit Fields */
 113#define PHY_LXT971_DIG_CFG_RES1         (0xF000)
 114#define PHY_LXT971_DIG_CFG_MII_DRIVE    (0x0800)
 115#define PHY_LXT971_DIG_CFG_RES2         (0x0400)
 116#define PHY_LXT971_DIG_CFG_SHOW_SYMBOL  (0x0200)
 117#define PHY_LXT971_DIG_CFG_RES3         (0x01FF)
 118
 119#define PHY_LXT971_MDIO_MAX_CLK         (8000000)
 120#define PHY_MDIO_MAX_CLK                (2500000)
 121
 122/* TX_CTRL Transmit Control Register Bit Fields
 123   documentation is buggy for this register, therefore setting not included */
 124
 125typedef enum
 126{
 127        PHY_NONE    = 0x0000, /* no PHY detected yet */
 128        PHY_LXT971A = 0x0013
 129} PhyType;
 130
 131#endif /* __LXT971A_H__ */
 132