linux/arch/arm/mach-kirkwood/common.c
<<
>>
Prefs
   1/*
   2 * arch/arm/mach-kirkwood/common.c
   3 *
   4 * Core functions for Marvell Kirkwood SoCs
   5 *
   6 * This file is licensed under the terms of the GNU General Public
   7 * License version 2.  This program is licensed "as is" without any
   8 * warranty of any kind, whether express or implied.
   9 */
  10
  11#include <linux/kernel.h>
  12#include <linux/init.h>
  13#include <linux/platform_device.h>
  14#include <linux/serial_8250.h>
  15#include <linux/ata_platform.h>
  16#include <linux/mtd/nand.h>
  17#include <linux/dma-mapping.h>
  18#include <linux/clk-provider.h>
  19#include <linux/spinlock.h>
  20#include <linux/mv643xx_i2c.h>
  21#include <linux/timex.h>
  22#include <linux/kexec.h>
  23#include <linux/reboot.h>
  24#include <net/dsa.h>
  25#include <asm/page.h>
  26#include <asm/mach/map.h>
  27#include <asm/mach/time.h>
  28#include <asm/hardware/cache-feroceon-l2.h>
  29#include <mach/kirkwood.h>
  30#include <mach/bridge-regs.h>
  31#include <linux/platform_data/asoc-kirkwood.h>
  32#include <linux/platform_data/mmc-mvsdio.h>
  33#include <linux/platform_data/mtd-orion_nand.h>
  34#include <linux/platform_data/usb-ehci-orion.h>
  35#include <plat/common.h>
  36#include <plat/time.h>
  37#include <linux/platform_data/dma-mv_xor.h>
  38#include "common.h"
  39#include "pm.h"
  40
  41/* These can go away once Kirkwood uses the mvebu-mbus DT binding */
  42#define KIRKWOOD_MBUS_NAND_TARGET 0x01
  43#define KIRKWOOD_MBUS_NAND_ATTR   0x2f
  44#define KIRKWOOD_MBUS_SRAM_TARGET 0x03
  45#define KIRKWOOD_MBUS_SRAM_ATTR   0x01
  46
  47/*****************************************************************************
  48 * I/O Address Mapping
  49 ****************************************************************************/
  50static struct map_desc kirkwood_io_desc[] __initdata = {
  51        {
  52                .virtual        = (unsigned long) KIRKWOOD_REGS_VIRT_BASE,
  53                .pfn            = __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE),
  54                .length         = KIRKWOOD_REGS_SIZE,
  55                .type           = MT_DEVICE,
  56        },
  57};
  58
  59void __init kirkwood_map_io(void)
  60{
  61        iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc));
  62}
  63
  64/*****************************************************************************
  65 * CLK tree
  66 ****************************************************************************/
  67
  68static void enable_sata0(void)
  69{
  70        /* Enable PLL and IVREF */
  71        writel(readl(SATA0_PHY_MODE_2) | 0xf, SATA0_PHY_MODE_2);
  72        /* Enable PHY */
  73        writel(readl(SATA0_IF_CTRL) & ~0x200, SATA0_IF_CTRL);
  74}
  75
  76static void disable_sata0(void)
  77{
  78        /* Disable PLL and IVREF */
  79        writel(readl(SATA0_PHY_MODE_2) & ~0xf, SATA0_PHY_MODE_2);
  80        /* Disable PHY */
  81        writel(readl(SATA0_IF_CTRL) | 0x200, SATA0_IF_CTRL);
  82}
  83
  84static void enable_sata1(void)
  85{
  86        /* Enable PLL and IVREF */
  87        writel(readl(SATA1_PHY_MODE_2) | 0xf, SATA1_PHY_MODE_2);
  88        /* Enable PHY */
  89        writel(readl(SATA1_IF_CTRL) & ~0x200, SATA1_IF_CTRL);
  90}
  91
  92static void disable_sata1(void)
  93{
  94        /* Disable PLL and IVREF */
  95        writel(readl(SATA1_PHY_MODE_2) & ~0xf, SATA1_PHY_MODE_2);
  96        /* Disable PHY */
  97        writel(readl(SATA1_IF_CTRL) | 0x200, SATA1_IF_CTRL);
  98}
  99
 100static void disable_pcie0(void)
 101{
 102        writel(readl(PCIE_LINK_CTRL) | 0x10, PCIE_LINK_CTRL);
 103        while (1)
 104                if (readl(PCIE_STATUS) & 0x1)
 105                        break;
 106        writel(readl(PCIE_LINK_CTRL) & ~0x10, PCIE_LINK_CTRL);
 107}
 108
 109static void disable_pcie1(void)
 110{
 111        u32 dev, rev;
 112
 113        kirkwood_pcie_id(&dev, &rev);
 114
 115        if (dev == MV88F6282_DEV_ID) {
 116                writel(readl(PCIE1_LINK_CTRL) | 0x10, PCIE1_LINK_CTRL);
 117                while (1)
 118                        if (readl(PCIE1_STATUS) & 0x1)
 119                                break;
 120                writel(readl(PCIE1_LINK_CTRL) & ~0x10, PCIE1_LINK_CTRL);
 121        }
 122}
 123
 124/* An extended version of the gated clk. This calls fn_en()/fn_dis
 125 * before enabling/disabling the clock.  We use this to turn on/off
 126 * PHYs etc.  */
 127struct clk_gate_fn {
 128        struct clk_gate gate;
 129        void (*fn_en)(void);
 130        void (*fn_dis)(void);
 131};
 132
 133#define to_clk_gate_fn(_gate) container_of(_gate, struct clk_gate_fn, gate)
 134#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw)
 135
 136static int clk_gate_fn_enable(struct clk_hw *hw)
 137{
 138        struct clk_gate *gate = to_clk_gate(hw);
 139        struct clk_gate_fn *gate_fn = to_clk_gate_fn(gate);
 140        int ret;
 141
 142        ret = clk_gate_ops.enable(hw);
 143        if (!ret && gate_fn->fn_en)
 144                gate_fn->fn_en();
 145
 146        return ret;
 147}
 148
 149static void clk_gate_fn_disable(struct clk_hw *hw)
 150{
 151        struct clk_gate *gate = to_clk_gate(hw);
 152        struct clk_gate_fn *gate_fn = to_clk_gate_fn(gate);
 153
 154        if (gate_fn->fn_dis)
 155                gate_fn->fn_dis();
 156
 157        clk_gate_ops.disable(hw);
 158}
 159
 160static struct clk_ops clk_gate_fn_ops;
 161
 162static struct clk __init *clk_register_gate_fn(struct device *dev,
 163                const char *name,
 164                const char *parent_name, unsigned long flags,
 165                void __iomem *reg, u8 bit_idx,
 166                u8 clk_gate_flags, spinlock_t *lock,
 167                void (*fn_en)(void), void (*fn_dis)(void))
 168{
 169        struct clk_gate_fn *gate_fn;
 170        struct clk *clk;
 171        struct clk_init_data init;
 172
 173        gate_fn = kzalloc(sizeof(struct clk_gate_fn), GFP_KERNEL);
 174        if (!gate_fn) {
 175                pr_err("%s: could not allocate gated clk\n", __func__);
 176                return ERR_PTR(-ENOMEM);
 177        }
 178
 179        init.name = name;
 180        init.ops = &clk_gate_fn_ops;
 181        init.flags = flags;
 182        init.parent_names = (parent_name ? &parent_name : NULL);
 183        init.num_parents = (parent_name ? 1 : 0);
 184
 185        /* struct clk_gate assignments */
 186        gate_fn->gate.reg = reg;
 187        gate_fn->gate.bit_idx = bit_idx;
 188        gate_fn->gate.flags = clk_gate_flags;
 189        gate_fn->gate.lock = lock;
 190        gate_fn->gate.hw.init = &init;
 191        gate_fn->fn_en = fn_en;
 192        gate_fn->fn_dis = fn_dis;
 193
 194        /* ops is the gate ops, but with our enable/disable functions */
 195        if (clk_gate_fn_ops.enable != clk_gate_fn_enable ||
 196            clk_gate_fn_ops.disable != clk_gate_fn_disable) {
 197                clk_gate_fn_ops = clk_gate_ops;
 198                clk_gate_fn_ops.enable = clk_gate_fn_enable;
 199                clk_gate_fn_ops.disable = clk_gate_fn_disable;
 200        }
 201
 202        clk = clk_register(dev, &gate_fn->gate.hw);
 203
 204        if (IS_ERR(clk))
 205                kfree(gate_fn);
 206
 207        return clk;
 208}
 209
 210static DEFINE_SPINLOCK(gating_lock);
 211static struct clk *tclk;
 212
 213static struct clk __init *kirkwood_register_gate(const char *name, u8 bit_idx)
 214{
 215        return clk_register_gate(NULL, name, "tclk", 0, CLOCK_GATING_CTRL,
 216                                 bit_idx, 0, &gating_lock);
 217}
 218
 219static struct clk __init *kirkwood_register_gate_fn(const char *name,
 220                                                    u8 bit_idx,
 221                                                    void (*fn_en)(void),
 222                                                    void (*fn_dis)(void))
 223{
 224        return clk_register_gate_fn(NULL, name, "tclk", 0, CLOCK_GATING_CTRL,
 225                                    bit_idx, 0, &gating_lock, fn_en, fn_dis);
 226}
 227
 228static struct clk *ge0, *ge1;
 229
 230void __init kirkwood_clk_init(void)
 231{
 232        struct clk *runit, *sata0, *sata1, *usb0, *sdio;
 233        struct clk *crypto, *xor0, *xor1, *pex0, *pex1, *audio;
 234
 235        tclk = clk_register_fixed_rate(NULL, "tclk", NULL,
 236                                       CLK_IS_ROOT, kirkwood_tclk);
 237
 238        runit = kirkwood_register_gate("runit",  CGC_BIT_RUNIT);
 239        ge0 = kirkwood_register_gate("ge0",    CGC_BIT_GE0);
 240        ge1 = kirkwood_register_gate("ge1",    CGC_BIT_GE1);
 241        sata0 = kirkwood_register_gate_fn("sata0",  CGC_BIT_SATA0,
 242                                          enable_sata0, disable_sata0);
 243        sata1 = kirkwood_register_gate_fn("sata1",  CGC_BIT_SATA1,
 244                                          enable_sata1, disable_sata1);
 245        usb0 = kirkwood_register_gate("usb0",   CGC_BIT_USB0);
 246        sdio = kirkwood_register_gate("sdio",   CGC_BIT_SDIO);
 247        crypto = kirkwood_register_gate("crypto", CGC_BIT_CRYPTO);
 248        xor0 = kirkwood_register_gate("xor0",   CGC_BIT_XOR0);
 249        xor1 = kirkwood_register_gate("xor1",   CGC_BIT_XOR1);
 250        pex0 = kirkwood_register_gate_fn("pex0",   CGC_BIT_PEX0,
 251                                         NULL, disable_pcie0);
 252        pex1 = kirkwood_register_gate_fn("pex1",   CGC_BIT_PEX1,
 253                                         NULL, disable_pcie1);
 254        audio = kirkwood_register_gate("audio",  CGC_BIT_AUDIO);
 255        kirkwood_register_gate("tdm",    CGC_BIT_TDM);
 256        kirkwood_register_gate("tsu",    CGC_BIT_TSU);
 257
 258        /* clkdev entries, mapping clks to devices */
 259        orion_clkdev_add(NULL, "orion_spi.0", runit);
 260        orion_clkdev_add(NULL, "orion_spi.1", runit);
 261        orion_clkdev_add(NULL, MV643XX_ETH_NAME ".0", ge0);
 262        orion_clkdev_add(NULL, MV643XX_ETH_NAME ".1", ge1);
 263        orion_clkdev_add(NULL, "orion_wdt", tclk);
 264        orion_clkdev_add("0", "sata_mv.0", sata0);
 265        orion_clkdev_add("1", "sata_mv.0", sata1);
 266        orion_clkdev_add(NULL, "orion-ehci.0", usb0);
 267        orion_clkdev_add(NULL, "orion_nand", runit);
 268        orion_clkdev_add(NULL, "mvsdio", sdio);
 269        orion_clkdev_add(NULL, "mv_crypto", crypto);
 270        orion_clkdev_add(NULL, MV_XOR_NAME ".0", xor0);
 271        orion_clkdev_add(NULL, MV_XOR_NAME ".1", xor1);
 272        orion_clkdev_add("0", "pcie", pex0);
 273        orion_clkdev_add("1", "pcie", pex1);
 274        orion_clkdev_add(NULL, "mvebu-audio", audio);
 275        orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".0", runit);
 276        orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".1", runit);
 277
 278        /* Marvell says runit is used by SPI, UART, NAND, TWSI, ...,
 279         * so should never be gated.
 280         */
 281        clk_prepare_enable(runit);
 282}
 283
 284/*****************************************************************************
 285 * EHCI0
 286 ****************************************************************************/
 287void __init kirkwood_ehci_init(void)
 288{
 289        orion_ehci_init(USB_PHYS_BASE, IRQ_KIRKWOOD_USB, EHCI_PHY_NA);
 290}
 291
 292
 293/*****************************************************************************
 294 * GE00
 295 ****************************************************************************/
 296void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
 297{
 298        orion_ge00_init(eth_data,
 299                        GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM,
 300                        IRQ_KIRKWOOD_GE00_ERR, 1600);
 301        /* The interface forgets the MAC address assigned by u-boot if
 302        the clock is turned off, so claim the clk now. */
 303        clk_prepare_enable(ge0);
 304}
 305
 306
 307/*****************************************************************************
 308 * GE01
 309 ****************************************************************************/
 310void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
 311{
 312        orion_ge01_init(eth_data,
 313                        GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM,
 314                        IRQ_KIRKWOOD_GE01_ERR, 1600);
 315        clk_prepare_enable(ge1);
 316}
 317
 318
 319/*****************************************************************************
 320 * Ethernet switch
 321 ****************************************************************************/
 322void __init kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq)
 323{
 324        orion_ge00_switch_init(d, irq);
 325}
 326
 327
 328/*****************************************************************************
 329 * NAND flash
 330 ****************************************************************************/
 331static struct resource kirkwood_nand_resource = {
 332        .flags          = IORESOURCE_MEM,
 333        .start          = KIRKWOOD_NAND_MEM_PHYS_BASE,
 334        .end            = KIRKWOOD_NAND_MEM_PHYS_BASE +
 335                                KIRKWOOD_NAND_MEM_SIZE - 1,
 336};
 337
 338static struct orion_nand_data kirkwood_nand_data = {
 339        .cle            = 0,
 340        .ale            = 1,
 341        .width          = 8,
 342};
 343
 344static struct platform_device kirkwood_nand_flash = {
 345        .name           = "orion_nand",
 346        .id             = -1,
 347        .dev            = {
 348                .platform_data  = &kirkwood_nand_data,
 349        },
 350        .resource       = &kirkwood_nand_resource,
 351        .num_resources  = 1,
 352};
 353
 354void __init kirkwood_nand_init(struct mtd_partition *parts, int nr_parts,
 355                               int chip_delay)
 356{
 357        kirkwood_nand_data.parts = parts;
 358        kirkwood_nand_data.nr_parts = nr_parts;
 359        kirkwood_nand_data.chip_delay = chip_delay;
 360        platform_device_register(&kirkwood_nand_flash);
 361}
 362
 363void __init kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts,
 364                                   int (*dev_ready)(struct mtd_info *))
 365{
 366        kirkwood_nand_data.parts = parts;
 367        kirkwood_nand_data.nr_parts = nr_parts;
 368        kirkwood_nand_data.dev_ready = dev_ready;
 369        platform_device_register(&kirkwood_nand_flash);
 370}
 371
 372/*****************************************************************************
 373 * SoC RTC
 374 ****************************************************************************/
 375static void __init kirkwood_rtc_init(void)
 376{
 377        orion_rtc_init(RTC_PHYS_BASE, IRQ_KIRKWOOD_RTC);
 378}
 379
 380
 381/*****************************************************************************
 382 * SATA
 383 ****************************************************************************/
 384void __init kirkwood_sata_init(struct mv_sata_platform_data *sata_data)
 385{
 386        orion_sata_init(sata_data, SATA_PHYS_BASE, IRQ_KIRKWOOD_SATA);
 387}
 388
 389
 390/*****************************************************************************
 391 * SD/SDIO/MMC
 392 ****************************************************************************/
 393static struct resource mvsdio_resources[] = {
 394        [0] = {
 395                .start  = SDIO_PHYS_BASE,
 396                .end    = SDIO_PHYS_BASE + SZ_1K - 1,
 397                .flags  = IORESOURCE_MEM,
 398        },
 399        [1] = {
 400                .start  = IRQ_KIRKWOOD_SDIO,
 401                .end    = IRQ_KIRKWOOD_SDIO,
 402                .flags  = IORESOURCE_IRQ,
 403        },
 404};
 405
 406static u64 mvsdio_dmamask = DMA_BIT_MASK(32);
 407
 408static struct platform_device kirkwood_sdio = {
 409        .name           = "mvsdio",
 410        .id             = -1,
 411        .dev            = {
 412                .dma_mask = &mvsdio_dmamask,
 413                .coherent_dma_mask = DMA_BIT_MASK(32),
 414        },
 415        .num_resources  = ARRAY_SIZE(mvsdio_resources),
 416        .resource       = mvsdio_resources,
 417};
 418
 419void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data)
 420{
 421        u32 dev, rev;
 422
 423        kirkwood_pcie_id(&dev, &rev);
 424        if (rev == 0 && dev != MV88F6282_DEV_ID) /* catch all Kirkwood Z0's */
 425                mvsdio_data->clock = 100000000;
 426        else
 427                mvsdio_data->clock = 200000000;
 428        kirkwood_sdio.dev.platform_data = mvsdio_data;
 429        platform_device_register(&kirkwood_sdio);
 430}
 431
 432
 433/*****************************************************************************
 434 * SPI
 435 ****************************************************************************/
 436void __init kirkwood_spi_init(void)
 437{
 438        orion_spi_init(SPI_PHYS_BASE);
 439}
 440
 441
 442/*****************************************************************************
 443 * I2C
 444 ****************************************************************************/
 445void __init kirkwood_i2c_init(void)
 446{
 447        orion_i2c_init(I2C_PHYS_BASE, IRQ_KIRKWOOD_TWSI, 8);
 448}
 449
 450
 451/*****************************************************************************
 452 * UART0
 453 ****************************************************************************/
 454
 455void __init kirkwood_uart0_init(void)
 456{
 457        orion_uart0_init(UART0_VIRT_BASE, UART0_PHYS_BASE,
 458                         IRQ_KIRKWOOD_UART_0, tclk);
 459}
 460
 461
 462/*****************************************************************************
 463 * UART1
 464 ****************************************************************************/
 465void __init kirkwood_uart1_init(void)
 466{
 467        orion_uart1_init(UART1_VIRT_BASE, UART1_PHYS_BASE,
 468                         IRQ_KIRKWOOD_UART_1, tclk);
 469}
 470
 471/*****************************************************************************
 472 * Cryptographic Engines and Security Accelerator (CESA)
 473 ****************************************************************************/
 474void __init kirkwood_crypto_init(void)
 475{
 476        orion_crypto_init(CRYPTO_PHYS_BASE, KIRKWOOD_SRAM_PHYS_BASE,
 477                          KIRKWOOD_SRAM_SIZE, IRQ_KIRKWOOD_CRYPTO);
 478}
 479
 480
 481/*****************************************************************************
 482 * XOR0
 483 ****************************************************************************/
 484void __init kirkwood_xor0_init(void)
 485{
 486        orion_xor0_init(XOR0_PHYS_BASE, XOR0_HIGH_PHYS_BASE,
 487                        IRQ_KIRKWOOD_XOR_00, IRQ_KIRKWOOD_XOR_01);
 488}
 489
 490
 491/*****************************************************************************
 492 * XOR1
 493 ****************************************************************************/
 494void __init kirkwood_xor1_init(void)
 495{
 496        orion_xor1_init(XOR1_PHYS_BASE, XOR1_HIGH_PHYS_BASE,
 497                        IRQ_KIRKWOOD_XOR_10, IRQ_KIRKWOOD_XOR_11);
 498}
 499
 500
 501/*****************************************************************************
 502 * Watchdog
 503 ****************************************************************************/
 504void __init kirkwood_wdt_init(void)
 505{
 506        orion_wdt_init();
 507}
 508
 509/*****************************************************************************
 510 * CPU idle
 511 ****************************************************************************/
 512static struct resource kirkwood_cpuidle_resource[] = {
 513        {
 514                .flags  = IORESOURCE_MEM,
 515                .start  = DDR_OPERATION_BASE,
 516                .end    = DDR_OPERATION_BASE + 3,
 517        },
 518};
 519
 520static struct platform_device kirkwood_cpuidle = {
 521        .name           = "kirkwood_cpuidle",
 522        .id             = -1,
 523        .resource       = kirkwood_cpuidle_resource,
 524        .num_resources  = 1,
 525};
 526
 527void __init kirkwood_cpuidle_init(void)
 528{
 529        platform_device_register(&kirkwood_cpuidle);
 530}
 531
 532/*****************************************************************************
 533 * Time handling
 534 ****************************************************************************/
 535void __init kirkwood_init_early(void)
 536{
 537        orion_time_set_base(TIMER_VIRT_BASE);
 538}
 539
 540int kirkwood_tclk;
 541
 542static int __init kirkwood_find_tclk(void)
 543{
 544        u32 dev, rev;
 545
 546        kirkwood_pcie_id(&dev, &rev);
 547
 548        if (dev == MV88F6281_DEV_ID || dev == MV88F6282_DEV_ID)
 549                if (((readl(SAMPLE_AT_RESET) >> 21) & 1) == 0)
 550                        return 200000000;
 551
 552        return 166666667;
 553}
 554
 555void __init kirkwood_timer_init(void)
 556{
 557        kirkwood_tclk = kirkwood_find_tclk();
 558
 559        orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR,
 560                        IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
 561}
 562
 563/*****************************************************************************
 564 * Audio
 565 ****************************************************************************/
 566static struct resource kirkwood_audio_resources[] = {
 567        [0] = {
 568                .start  = AUDIO_PHYS_BASE,
 569                .end    = AUDIO_PHYS_BASE + SZ_16K - 1,
 570                .flags  = IORESOURCE_MEM,
 571        },
 572        [1] = {
 573                .start  = IRQ_KIRKWOOD_I2S,
 574                .end    = IRQ_KIRKWOOD_I2S,
 575                .flags  = IORESOURCE_IRQ,
 576        },
 577};
 578
 579static struct kirkwood_asoc_platform_data kirkwood_audio_data = {
 580        .burst       = 128,
 581};
 582
 583static struct platform_device kirkwood_audio_device = {
 584        .name           = "mvebu-audio",
 585        .id             = -1,
 586        .num_resources  = ARRAY_SIZE(kirkwood_audio_resources),
 587        .resource       = kirkwood_audio_resources,
 588        .dev            = {
 589                .platform_data  = &kirkwood_audio_data,
 590        },
 591};
 592
 593void __init kirkwood_audio_init(void)
 594{
 595        platform_device_register(&kirkwood_audio_device);
 596}
 597
 598/*****************************************************************************
 599 * CPU Frequency
 600 ****************************************************************************/
 601static struct resource kirkwood_cpufreq_resources[] = {
 602        [0] = {
 603                .start  = CPU_CONTROL_PHYS,
 604                .end    = CPU_CONTROL_PHYS + 3,
 605                .flags  = IORESOURCE_MEM,
 606        },
 607};
 608
 609static struct platform_device kirkwood_cpufreq_device = {
 610        .name           = "kirkwood-cpufreq",
 611        .id             = -1,
 612        .num_resources  = ARRAY_SIZE(kirkwood_cpufreq_resources),
 613        .resource       = kirkwood_cpufreq_resources,
 614};
 615
 616void __init kirkwood_cpufreq_init(void)
 617{
 618        platform_device_register(&kirkwood_cpufreq_device);
 619}
 620
 621/*****************************************************************************
 622 * General
 623 ****************************************************************************/
 624/*
 625 * Identify device ID and revision.
 626 */
 627char * __init kirkwood_id(void)
 628{
 629        u32 dev, rev;
 630
 631        kirkwood_pcie_id(&dev, &rev);
 632
 633        if (dev == MV88F6281_DEV_ID) {
 634                if (rev == MV88F6281_REV_Z0)
 635                        return "MV88F6281-Z0";
 636                else if (rev == MV88F6281_REV_A0)
 637                        return "MV88F6281-A0";
 638                else if (rev == MV88F6281_REV_A1)
 639                        return "MV88F6281-A1";
 640                else
 641                        return "MV88F6281-Rev-Unsupported";
 642        } else if (dev == MV88F6192_DEV_ID) {
 643                if (rev == MV88F6192_REV_Z0)
 644                        return "MV88F6192-Z0";
 645                else if (rev == MV88F6192_REV_A0)
 646                        return "MV88F6192-A0";
 647                else if (rev == MV88F6192_REV_A1)
 648                        return "MV88F6192-A1";
 649                else
 650                        return "MV88F6192-Rev-Unsupported";
 651        } else if (dev == MV88F6180_DEV_ID) {
 652                if (rev == MV88F6180_REV_A0)
 653                        return "MV88F6180-Rev-A0";
 654                else if (rev == MV88F6180_REV_A1)
 655                        return "MV88F6180-Rev-A1";
 656                else
 657                        return "MV88F6180-Rev-Unsupported";
 658        } else if (dev == MV88F6282_DEV_ID) {
 659                if (rev == MV88F6282_REV_A0)
 660                        return "MV88F6282-Rev-A0";
 661                else if (rev == MV88F6282_REV_A1)
 662                        return "MV88F6282-Rev-A1";
 663                else
 664                        return "MV88F6282-Rev-Unsupported";
 665        } else {
 666                return "Device-Unknown";
 667        }
 668}
 669
 670void __init kirkwood_setup_wins(void)
 671{
 672        mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_NAND_TARGET,
 673                                    KIRKWOOD_MBUS_NAND_ATTR,
 674                                    KIRKWOOD_NAND_MEM_PHYS_BASE,
 675                                    KIRKWOOD_NAND_MEM_SIZE);
 676        mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_SRAM_TARGET,
 677                                    KIRKWOOD_MBUS_SRAM_ATTR,
 678                                    KIRKWOOD_SRAM_PHYS_BASE,
 679                                    KIRKWOOD_SRAM_SIZE);
 680}
 681
 682void __init kirkwood_l2_init(void)
 683{
 684#ifdef CONFIG_CACHE_FEROCEON_L2
 685#ifdef CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH
 686        writel(readl(L2_CONFIG_REG) | L2_WRITETHROUGH, L2_CONFIG_REG);
 687        feroceon_l2_init(1);
 688#else
 689        writel(readl(L2_CONFIG_REG) & ~L2_WRITETHROUGH, L2_CONFIG_REG);
 690        feroceon_l2_init(0);
 691#endif
 692#endif
 693}
 694
 695void __init kirkwood_init(void)
 696{
 697        pr_info("Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk);
 698
 699        /*
 700         * Disable propagation of mbus errors to the CPU local bus,
 701         * as this causes mbus errors (which can occur for example
 702         * for PCI aborts) to throw CPU aborts, which we're not set
 703         * up to deal with.
 704         */
 705        writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
 706
 707        BUG_ON(mvebu_mbus_init("marvell,kirkwood-mbus",
 708                        BRIDGE_WINS_BASE, BRIDGE_WINS_SZ,
 709                        DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ));
 710
 711        kirkwood_setup_wins();
 712
 713        kirkwood_l2_init();
 714
 715        /* Setup root of clk tree */
 716        kirkwood_clk_init();
 717
 718        /* internal devices that every board has */
 719        kirkwood_rtc_init();
 720        kirkwood_wdt_init();
 721        kirkwood_xor0_init();
 722        kirkwood_xor1_init();
 723        kirkwood_crypto_init();
 724
 725        kirkwood_pm_init();
 726        kirkwood_cpuidle_init();
 727#ifdef CONFIG_KEXEC
 728        kexec_reinit = kirkwood_enable_pcie;
 729#endif
 730}
 731
 732void kirkwood_restart(enum reboot_mode mode, const char *cmd)
 733{
 734        /*
 735         * Enable soft reset to assert RSTOUTn.
 736         */
 737        writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
 738
 739        /*
 740         * Assert soft reset.
 741         */
 742        writel(SOFT_RESET, SYSTEM_SOFT_RESET);
 743
 744        while (1)
 745                ;
 746}
 747